How to reboot Windows 8 Pro mode safe?

Similar Questions

• How to uninstall Windows XP PRO so that I can install Windows Pro 8.1?

  Problem? My Windows XP PRO is not listed in the control panel. (The system came with the new computer).

  I want to uninstall, & replace it with Windows 8.1 pro (disk).

  Is it done in safe mode? Also how a clean uninstallation is completed?

  MS says that an upgrade is not possible (since '23 programs, etc. need attention').

  All advice appreciated. Best regards, Doug

  Original title: how to uninstall Windows XP PRO, which is not listed in the control panel?

  Of course, it is not in the control panel. This isn't how it works. You must reformat and perform a new installation of Windows 8.

  Your computer will not be able to be upgraded. You must consult the computer manufacturer to see if there is even the disks available to this end for Windows 8. Probably not.

  And, even if all the drivers were available, you always have to reinstall ALL your programs and data on the medium of origin or files and backup of the date.

• How to convert Windows 7 pro 64-bit to windows 7 pro 32 bit

  How to convert Windows 7 pro 64-bit to windows 7 pro 32 bit

  You can't unless you are doing a new installation that would eliminate all of your files and installed programs.

  Clean install Windows 7 - Windows 7 Forums help

• How to put windows 7 pro on the new computer using the same key on the side of the other computer

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  Original title: Windows 7 pro

  Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  You can not, for at least one (and two possible) reasons.

  1. it isn't clean if you want to have two computers, or you
  you want to remove from the old computer and put it on the new. If
  you want once, you can't do that - the rule is very clear: there
  a copy (or a license) for each computer.

  There is nothing new here. This is exactly the same rule that has been in
  effect on all versions of Windows from at least with Windows 3.1.

  2. but even if you want it on a single and from uninstall
  the old computer, you can't do it. It is because if it came with the
  computer, it is an OEM version and the biggest drawback to he a
  OEM version, is that its license it permanently binds to the first
  It is installed on the computer. He can never legally be moved to another
  computer, sold or assigned (except with the original computer).

• How to install windows 7 pro, when I mistakenly installed the 32-bit version instead of the 64-bit version

  I just installed windows 7 pro.  Unfortunately, by mistake I installed the 32-bit program on 64-bit program.  now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows.  upgrade I need the disk to correct installation.  so he said to shut down your computer and reboot the installation disc. »

  but when I reboot it just goes directly to the office.  would someone kindly give advice on how I overcame this misadventure?  I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version.  I still have the discs and software keys... Thank you.
  Prior to this installation, I was running 32 bit XP pro

  You'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.

  Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.

  With the 64-bit DVD in the DVD drive, restart the computer.

  Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,

  Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• How to transfer Windows 7 pro to my new laptop computer key

  I've upgraded to Windows 7 Pro... almost a year or two ago. Now, I bought a new laptop and it has 7 Home premium: cannot find my original key to the pro version: How can I transfer the key pro 7 to my new laptop?

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.

  Make sure that Windows 7 Professional is no longer in use on the old machine.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows cannot boot mode safe (Active Directory repair)

  Hi, I tried to get into the Mode safe on my desktop Windows 8 and I chose the 'Active Directory repair' option in the msconfig window. After the reboot, all I get is a blue screen with no login field and absolutely nothing to do except close down and restart. Is there a way to disable "Active Directory repair" and return to the normal startup mode without having access to the office. I do not have a Windows 8 DVD with me because I've updated online.

  Herea picture of the blue white screen.
  Thank you!

  Hold down the SHIFT key when you click restart on the power to the menu screen.  It will take you to a place of recovery, that you can use to run system restore and to 'come back' until you have made the change.

• How to install Windows XP Pro on W2k on the Satellite Pro 6100?

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro installed.

  I can't connect to my wireless router. The switch is in the correct position.
  I have been informed that there could be a conflict between wireless and Win2000 Pro installation. This is why I want to change my WinXP Pro using the key provided with the new laptop (dual operating system). However, I can't reformat using a WinXP Pro disc at first upward, the disc is ignored and Win2000 Pro. If I use the recovery cd (start with holding C and let go when it runs upward), something starts which I presume to be a sequence installation however seconds I see a reference to a (?) drive z, a brief exhibition of three rows of "invalid drive specification" and it still loads Win2000 Pro.

  Can someone advise how (or if!) Can I reformat?

  Any help will be greatly appreciated.
  See you soon.

  Eventually it s a bad boot command but most often it after pressing the C button the laptop should boot from the CD.
  You said something done drive and I think that the start of the player has been activated, but the drive is not able to read the media.
  For me, this looks like a disk failure.

  By the way: check in Manager device if your laptop has installed the wireless network card. In my view, that cannot connect to the router WLan because the map has not been installed. The WLan switch is available because the wireless network card is optional for this laptop. You know?

• How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

  Hello.

  I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

  I use the 32-bit version of Windows Server 2008 in thw.

  Hello

  You can view this issue in this help link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• How to copy windows XP pro update fills

  I want to save a copy of windows, all files updates which is for my PC, for after stop of the windows xp pro in favor Web site.

  How can I do this because I have hardware that is not supported in any newer OS.

  Hello

  For benefits during the different phases, you can open the link below and choose "Support Life Cycle policy" on the left side.

  http://support.Microsoft.com/lifecycle

  For reference

  http://support.Microsoft.com/lifecycle/?ln=en-GB&C2=1173

  Integrate the end of Support Date	Extended Support end date	Service Pack Support end date
  31/12/2001	14/04/2009	04/08/2014

  If you reinstall Windows until the end of cycle, you will get the benefit as shown in the link. The best way is to download and save Service packs for XP that will cover more updates, or you can make a note of the update currently installed in the computer and manually download as backup.

• Software assistants! -How to install Windows 7 Pro on my computer software ingenuine?

  Hello!

  Yes, my computer has been "reformatted" with what I knew was ingenuine software... and now my phone won't let me connect to internet or anything! So I decided to do it myself. I bought Windows 7 Pro, and I was just wondering how to install the software.

  I need to remove my computer before installing? How?

  Or can I just put the CD and it configures all this for me?

  I don't want to just put the CD in, incase something does not! So please software wizards - help!

  See you soon,.

  RTSY

  Hello

  You have to boot from the Windows 7 DVD:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  ____________________________________________

  During the installation process, you will need to delete the partition with the non genuine Windows 7 on it.

  Information is in the link on how to do it and do it again (Sections 7 and 8):

  How to do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  ______________________________________________

  Using this installation method may require phone Activation.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• How to uninstall Windows 8 pro?

  I installed window 8 pro and hate it. I want to go pushing window 7. How can I uninstall back to original

  Original title: uninstall windows 8 pro

  A complete "clean install" of Windows 7 is required if you are currently running Windows 8.

• My keyboard does not work sometimes unless I reboot Windows 8 Pro?

  I installed Windows 8 Pro as an upgrade of Windows 7 Ultimate last Friday.  Everything works fine, but often after the awakening of my system from sleep, I can't use my keyboard and need to login with the keyboard of the screen.  After login, I still use the keyboard of the screen.  No problem with the mouse.  Rebooting always fixes the problem.  All of the suggestions.

  Len

  Hi Len III,

  What is the brand and model of your keyboard?

  If you already check the manufacturer's website and make sure that you have the most recent driver for your keyboard version.

• How to reinstall Windows 8 Pro

  Hello

  How to reinstall in the same system windows 8 pro with already purchased product key online. I bought one DVD product key. There is a future for guidance only. Because if I'm going to back up the system showing 62 GB size Windows disk. If I backup with 8.5 GB DVD that will work or not. Suppose I'll use 8.5 GB DVD speed appropriate for writing. Please guide me the right way.

  Thank you best regards &,.

  Saifullah.

  How to reinstall Windows 8

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

  Option 2:

  If you create an installation DVD or a USB bootable, you can use them to reinstall Windows. First, you will need to reinstall license qualification, then begin the upgrade to Windows 8. License of qualification means that you will need to reinstall Windows XP, Vista or Windows 7.

  Option 3:

  A workaround for this situation is to create a system image of Windows 8, just after you have upgraded. So if your drive plant, you can simply restore the image on a new hard drive or restore the image on the same drive, if you want to reinstall Windos 8.

  See the following for instructions on how to create an image of the installation process of Windows 8:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  (references Windows 7, but the same principles apply to Windows 8).

• How to downgrade Windows 8 Pro - license keys

  In order to exercise my rights to downgrade to Windows 8 Pro for Windows 7 Pro (or business Vista) I need a valid key of Windows 7 Pro. How can I get this key? When I called support license (number of times) I was told that I should use a key of an existing facility, or buy a new one. I explained that by using an existing key (assuming I had a) would have this key reported by Microsoft as invalid, and that buying a whole new license did not exercise my rights under the terms of the license. Time and time again support teams have been unable to provide a solution to this problem.

  Looking at the document of conditions of licence, it says:
  «Instead of using the Windows Pro 8 software, you can use one of the following versions: Windows 7 Professional or Windows Vista Business.»
  and:
  "The manufacturer or installer, nor Microsoft is obliged to provide older versions to you."
  My interpretation of this is that Microsoft (and the OEM) will grant the rights for the downgrade, but refuses to give the key needed to do.
  How can I get a key to be able to exercise my right of demotion, as stated in the terms of the license?

  Hi James, I have been informed by Microsoft that if you get a copy of Windows 7, even if it has been used or granted to another user you can load this copy and use the product key and then call Microsoft explaining you exercise your right of demotion and they will give you an authorization code for the product key that you give them.

  What I was not able to do is to correctly load Windows 7, my PC comes up with an error. I wish Microsoft or could someone tell me the exact steps like those that Microsoft have highlighted is incorrect!