How to record measured analog data on the PC?

Similar Questions

• How to access a certain date in the date and time field SQL Server

  I have a field named job_date in a table in my database of the 8 SQL Server.

  The data type is datetime.

  Thus, the values for the fields as the 2013-03-11 15:55:52.000 look.

  How to query this field to include only the values of a certain date?

  For example

  < cfquery name = "get_job_name" datasource = 'abc' >

  SELECT FROM job_info job_date WHERE Job_name = March 12, 2013"

  < / cfquery >

  When I query the field now I get NO RECORDS.

  This is because as the fields like this 15:55:52.000 2013-03-11. instead of this March 12, 2013"

  How to access a certain date in the date and time field SQL Server when its formatting as this 15:55:52.000 2013-03-11. ?

  where job_date > = TheDateYouWant

  and job_date<>

  In addition, the format is irrelevent.  The only issue of date formats time is when you want to display.

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• How to record entries of UI with the data measured in a TDM file?

  Hello

  I built a user interface to monitor and control a pump test bench, I use the USB-6212 in a Windows PC with the new SW and readers.

  Now I try to collect all the measured data and control values in the UI, permanently at 1 kHz and write it in a single file of CT.

  The problem is that only the measured signals get connected, but only a few values at the beginning of the file are saved in the user interface; then all empty.

  I have all tried, producing waveforms, synchronize them with measured data for the same stamps, aling & resample and blocks of collector of the Toolbox Signal Express, but there are still some missing data in the user interface.

  In my original configuration, indicated in the post, I set up the block of analog to read continuously at 1 kHz with 100 samples, while output and analog digital on-demand writing. I have included the file complete, just in case some block causes disruption.

  

  

  Your express DAQ screws will probably be reading/writing of multiple samples for each run, then wire you a single value for your set points. The use of the data type of dynamic signals hides this information from you (that's why nobody is using them once they become more familiar with LabVIEW).

  You need to take only the last value of dynamic data, or touch your set points so they are the same size as your dynamic data. If you write 100 samples at a time, then you will have your set points only once by 100 values. You must create a table/waveform of 100 points with the same value.

• acquisition and recording of analog data with producer consumer model

  Someone on this forum, in a separate last week discussion, suggested that I use the producer model consumer data acq.  My ultimate goal is to acquire analog channels 1-4 continuous data, display graphical band style and save the data on the boot disk when the user presses the 'Start Saving' button (and will continue to display recorder cards).  Economy will stop when the user presses the button "Stop Saving" but strip map will continue to operate.

  My attempt to use the producer-consumer model is attached (LV 8.5 only).  It does not work.  I have not tried to implement for recording user controls - just trying to make simple continuous display and save (1 channel) at this stage, using this model.  VI runs, but the graphic Strip is never updated with the actual data, and the data file that is saved has zero byte inside.

  Thank you.

  WCR,

  Looked at your code, and you are right.  It won't work.

  Take a look at this example:

  http://decibel.NI.com/content/docs/doc-2431

  The VI of the acquisition must be inserted in the loop of the producer.  In addition, you must tell him how many samples for (otherwise, it will get 0).

• Sync video and analog data on the same GUI

  I am programming a request that will be followed and video recording IMAQ and given DAQ.  Is there a way to synchornize data during the processing of data on a GUI Viewer displaying the message?  I'm looking to start the video as if it were alive, and have the data displayed on a graph as if we were saving the data of this video.  A simple shared timestamp will work?

  How about tiara?  I have seen no support for files video tiara...

  eatherton says:

  How about tiara?  I have seen no support for files video tiara...

  Of course Diadem supports video files

  -Pre version 10.0: use Clip DIAdem.  See the knowledge base synchronization of data with video clip DIAdem.

  -Version 10.0 or higher: see the example "Video and data synchronization" (located in the finder DIAdem example under "Display and modification of the data")

• How do MANUALLY enter you data into the application of health 10 IOS? There is no symbol and touch edit only gives you the option to delete existing data.

  I checked in the application of the health and read the Apple support page. They show the screen for 10 IOS on an iPhone, but their instructions don't work. There is not a Plus symbol to add data manually. It has only an editing tool that you can touch and only allows you to delete data.

  Hi, rmetzker!

  To manually enter the data points in the application of health, first go to the display of data on health as shown below.

  

  Then select category to which you want to enter data in (I'll use body measurements for example), then press on what data you enter (measurements > weight). In the upper right corner, it will be a plus + icon for you to manually enter your own data points.

  

  I hope this helps!

• How to remove documents and data in the iphone app podcast 6

  I know how to remove each podcast, but how do I remove "documents and data" in the application of podcast?  I have more than 4 GB of data and documents.

  I think I found a thread that is useful for you: https://origin-discussions-us.apple.com/thread/6822791?start=60 & tstart = 0

  Sonny3301 answer worked for me, «...» "(The steps are: 1) download the Battery Doctor app on your iPhone (it's the first one that appears in the search) (2) hit the"Junk"icon on the bottom and tap 'Clear Cache'." (3) repeat until your space becomes available. The people that I learned this technique of some other bulletin board said it took 10-15 tries; It took me + 30 attempts. The memory savings start small at first, then it starts to hit hundreds of MB at a time. It sounds crazy, I know, but I went to have less than 200 MB of free space for 3.6 GB. Great thing, it was my podcast app had only been hogging to 1 GB of data, so the app battery doctor found 2.6 Go elsewhere. Good luck to you all and you are welcome. »

• How to connect an expiration date in the ID and the password set cached?

  I have windows 2003 race. I would like to know if there is any kind of code and where it must be added have log vpn users in the local network before they user of the laptop to go on the web?

  In other words, how I plug in and the expiration date for the caching of id and password?

  I'm not sure that's what you want.  You can change your machine such as passwords are cached at all, but then a person could not connect to his laptop unless it is connected to your domain, when it connects (forget not to use your computer on a plane).  If you want to control access to the internet, many businesses use a Proxy Server with a password to regulate the internet connection.  See if these MS articles shall apply:

  "Caching of security credentials in Windows Server 2003, Windows XP, and in Windows 2000"
    <>http://support.Microsoft.com/kb/913485 >

  "Cached domain logon information.
    <>http://support.Microsoft.com/kb/172931 >

  HTH,
  JW

• How to record what is happening by the sound card without using the microphone to avoid loss of quality.

  I tried, but there is no "Stereo mix" available options. There is only the (Conexant High Definition Audio) Microphone. It did not work. What I'll do is to buy a DVD for TV (tv Record program) burner and plug the hdmi cable from my computer to the DVD recorder and record what I want. After that, I just rip the audio from the file. I see no other option to do. I use windows vista Home premium.

  I would like to know how I can record the sound that is played by the soundcard using Vista without using the microphone as a source. Let's say the audio is played (audio stream) and I want to record this stream. There are many software that we can download that record what is happening in the microphone. The sound bounces off the speakers to the microphone. But when this happens, you lose a lot of the quality of the audio. So my question is if it is possible to record what is happening to the right of the sound card, before being sent to the sound card in order to avoid the loss of audio quality.

  ==============================
  Movie Maker has an option to record Narration...
  (Tools / tell the chronology). If you select stereo mix
  as the "Audio Input Source", you can save the
  Audio online. Your speakers and microphone are
  not required.

  And... maybe this link will help:

  How to record Internet radio stations on Windows Vista (using Audacity)
  http://www.ehow.com/how_4604071_record-Internet-radio-Windows-Vista.html John Inzer - MS - MVP - digital media experience

• How to send other linguistic data to the server using Http

  Hello

  How can I send data to the server except English other languages how to send to the server. Please someone help me it's urgent.

  Thank you

  Kind regards

  Bharath kumar

  Peter cool.

  problem fixed

  I use postdata String = new String (textField.getText (.getBytes("UTF-8")));

  Thank you

• How can I insert a date on the signature line?

  How can I insert a date automatically on the signature line?

  Digital signature fields display the date and time when they were signed by default.

• Record great shape data in the Oracle database

  Hi all

  I have a question as to how we store a large xml for example more than 10000 bytes in the oracle database. I tried to use varchar, but the length is limited to only 4000 bytes. Could someone let me know how to achieve this.

  Basically what I'm doing is in adobe livecycle workflow I will get the user entered data in the form as formData (xml) variable and I want to keep the same for any future reference. I need to use the same data to fill the form again in the future.

  Thanks in advance.

  Shekhar,

  I had handy MySQL, so I did it using that and attached here is a sample. For Oracle, this is mission for you as well as recovery.

  -Wasil

• How B2B Server retrieves FTP data (using the internal delivery method)

  Hi gurus B2B.
  
  B2B Server will pick up data from the FTP folder?
  
  In fact, if we want to send a file to the b2b server, we can send using internal delivery channel, we will give the FILE option,
  
  but I want to place the file in the ftp folder, so that it can pick up the file and it will handle. Could you please help me how to do this scenario.
  
  
  Concerning
  Suni.

  Hi Suni,

  Create IDC with transport as FTP protocol.

  For configuration information, see-

  http://www.Oracle.com/technology/products/integration/B2B/PDF/B2B_TN_010_Transport_File_FTP_Internal.PDF

  Kind regards
  Anuj

• How to pass parameters to Date on the data model

  Hi all
  I try to pass parameters of date on the data model and unable to pull all the data. When I tried hard-coded in the SQL query, it works. Here is the data model, can I pass parameters directly to the dataquery?
  I searched a lot but couldn't find it. Any help is greatly appreciated.
  
  <? XML version = "1.0" encoding = "WINDOWS-1252"? >
  < name of dataTemplate = "AIMS_VDIS_VALIDATION_REPORT" description = 'Invalid records in the GOALS and for the given date VDIS' version = "1.0" >
  < Parameters >
  < name of the parameter = "p_start_date" dataType = "date" / >
  < name of the parameter = "p_end_date" dataType = "date" / >
  < / Parameter >
  < dataQuery >
  < SQLStatement instance name = "T4" >
  <! [CDATA [SELECT pgw_custom. Account_Validate (acct_new) invalid,
  acct_new,
  DECODE (pgw_custom. Account_Validate (acct_new), 0, 'ACCOUNT OF OBJECTIVES not VALID', 'VALID OBJECTIVES ACCOUNT') message
  Of
  (SELECT DISTINCT SUBSTR (acct, 1, 3) |) JE_CAP | SUBSTR(ACCT,8) acct_new
  Of
  (SELECT the jav.jav_hours hours,
  ACCT GCC.concatenated_segments,
  GCC.code_combination_id ccid,
  $ (bua.hourly_rate * jav.jav_hours);
  CASE WHEN (um.class2 IN (' a ',' B', 'C', d ', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', ',' n, 'O', 'P', 'Q', 'R', 't')) THEN '3201'
  WHEN (um.class2 IN ('Z', "ZA", "ZA1', 'W', 'U', 'V', 'X', 'Y',"ZA2","ZB","ZC","ZD", the from ')) THEN '3301 '."
  END je_cap
  OF pgw_custom.jems_aims_vehicle jav,.
  Apps.mtl_generic_dispositions mg/d,
  Apps.gl_code_combinations_kfv gcc,
  mfour.unit_main@m4prg01 uh,.
  BUA mfour.bill_unit_acct@m4prg01
  WHERE jav.jav_glaccount = mgd.segment1 AND
  MGD.distribution_account = gcc.code_combination_id AND
  JAV.jav_vehicle = um.unit_no AND
  UM.unit_id = bua.unit_id AND
  JAV.jav_project IS NULL AND
  JAV.jav_task IS NULL AND
  JAV.jav_charge_date BETWEEN: p_start_date AND: p_end_date AND
  GCC.detail_posting_allowed = 'Y' AND
  GCC.enabled_flag = 'Y' AND
  NVL (gcc.end_date_active, TO_DATE('31-DEC-4720','DD-MON-YYYY')) > = SYSDATE AND
  SUBSTR (bua.billing_code, 1, 1) = "I" AND
  ((bua.eff_dt < = (SELECT date_fin)))
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)) AND
  BUA.end_dt IS NULL)
  OR
  (bua.end_dt >(SELECT start_date)
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)))
  ORDER BY valid, acct_new]] >
  < / sqlStatement >
  < / dataQuery >
  
  < dataStructure >
  < group name = "G_ACCTS" source = "T4" >
  < element name = "VALID" value = "valid" / >
  < element name = "NEW_ACCOUNT" value = "acct_new" / >
  < element name = "MESSAGE" value = "message" / >
  < / Group >
  < / dataStructure >
  < / dataTemplate >

  the parameter name must be

  p_start_date
  p_end_date

  And when the report is run, a value must be selected in the settings. Try this default sysdate.