Similar Questions

• Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

  A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

  If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

  If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

  Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Error blue screen: STOP: 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED

  original title: blue screen with the error: "STOP: 0x0000008E (0xC000001D, 0 x 82850572, 0x9E204038, 0x00000000)"»

  Hello everyone,

  It has been more than a week I tried to re - install my computer: ACER9802AWKMi after several months of support with blue screen apearing errors whenever there is more than one program open :-(
  So I started with a recovery disk, but the problem was still there.  The computer came with XP Home Edition and I got an upgrade to Vista (all original stuff) with all updates (SP1 and 2 and everything else updates)
  Now, every time I go on the internet: especially no problem, but if I want to play a game (online) full screen, after a few minutes:
  Yes: blue screen with messages such as
  STOP: 0X0000008E (0XC000001D, 0 X 82850572, 0X9E204038, 0X00000000)
  STOP: 0x0000007F (0x00000008, 0x8013F000, 0 x 00000000, 0 x 00000000) or
  PFN_LIST_CORRUPT or
  something with the memory of the BIOS (which I have to remove cache or mirror) witch I tried to do, but not found in the BIOS SetUp (when start PC press F2)

  Whenever I get another message :-(

  I tried with FixIt, fact CHKDSK - CHKDSK F + CHKDSK F R
  I have also run Everest to have all the necessary stuff... so if you need it...

  If anyone has a sollution, I would be very happy to hear it.

  TX much

  In the mean time brands more than 13,000,000 errors:(et toujours obtient plus élevé.)  Of course I'm not every minute in front of my screen (sometimes I work too: the job from 9 to 5, you know)

  Hi Sabine,.

  This means that the RAM is broken or damaged. If you receive error messages, you can stop the execution of memtest86 +.

  Ask someone who knew a little technical to open the laptop and check out how many RAM modules there. If it has a single module, buy a new RAM module.

  If she has more modules, remove other modules, so that you don't have 1 module of RAM left. Now run the test for each RAM module again (only install 1 module at the same time) to check if all are damaged or 1.

  If you have discovered how many RAM modules is broken, buy new RAM

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 - Crash blue screen - STOP: 0X000000F4

  Hi all

  Windows 7 - Crash blue screen - STOP: 0X000000F4

  Screen shows e blue screen will display the following error code:

  STOP: 0X000000F4 (0XFFFFFA800C4C4B10, 0XFFFFFA800C4C4DF0, 0 X 0000000000000003, 0XFFFFF8000418FE20).
  I tried to restore the mode, the safe & all the option available to start properly.  Given that I have no DVD of windows 7 to re - install windows again.
  My question is as follows:
  -Is - error code says something.
  -A way to re - install windows without CD or DVD or save the image.
  -Also, I can read and access data from the C: & D: drive in cmd in restore mode guest mode.
  Waiting for your suggestions.
  concerning
  Jagdish kone

  Blue_Screen_image_.PDF

  Hi Philippe,.

  Thanks for your reply. I want to reinstall windows on the same SSD. Given that the SSD drive works great as external drive.

  So please could you confirm, how do I reinstall windows again. As I see there are recovery drive comes when I use the SSD as external drive.

  Waiting for your suggestions.

  Concerning

  Jagdish

• Blue screen - STOP: 0x0000008E

  I got a blue error screen that lists the following information:
  Problem: Blue screen
  6.0.6002.2.2.2.0.768.3 OS version
  Locale 1033 ID
  ICC code 1000008e
  BCP1 C0000005
  81FF03D4 BCP2
  BE0C2C5C BCP3
  BCP4 00000000
  Version of the OS 6-0-6002
  Service Pk 2
  768-1 product

  Files that describe the problem:
  C:\Windows\Minidump\Min.011410-01.dmp
  C:Users\Owner\AppData\Local\Temp\WER-123833-0.SysData.XML
  C:Users\Owner\AppData\Local\Temp\WER14F6.tmp.version.txt

  The message said I may not have sufficient disk space and disable BIO memory options and something to do with caching. My battery was insufficient in time, so not that of course that has nothing to do with it. My battery needs to be replaced as well, since it does she take his load for more than 30 minutes. In any case, I don't know what to do or who call for this problem. I run on Windows Vista Edition Home Premium. I've already fried a laptop after 1. 5 years, the current one is 2 years old. I'd appreciate the help. Thank you

  Hello

  Power problems can cause strange things, however if the system is connected to a/c which should not be a problem.

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error fatal blue screen - Stop: C000021a

  Hi 'think that did something stupid to my pc (windows XP) I get the blue screen saying' STOP: c000021a {fatal system error} the windows logon system process ended unexpectedly with status 0xc0000034(0x00000000 0x00000000). The system has been shut down) then I have to turn off my computer and the same message arrives, I tried F8 to get to the screen and when I try all the different security modes, he keeps back to the blue screen error message, any help pls I have files I need this computer and I need my computer?.

  Just remembered my comodo Security told me that the file winlog.exe had a Trojan horse could not deleate it was therefore renamed as 2, then it after about 30 minutes and that's when events above

  Hello

  All your answers above did not help, because can not access any part of my pc to the action of the command prompts
  a friend of a friend who is a computer scientist came with his xp and started recovery from that disk and replace the missing file of winlogon.exe and my system is kind of back to normal, even if now my comodo internet security to report this file as a Trojan horse and to clean , but still reports it as a Trojan horse which is what did me in this mess to begin with.

• Blue screen - STOP: 0 x 00000024 (0x8630c6b8, 0xC000102, 0 x 0019023, 0 x 00000000)

  I can't start the machine up at all. Any mode, I try to boot into it only shows the blue screen error message. We do not have the Windows XP Media Center 2005 or the other disk.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system (except XP Media Center).

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  An error STOP 0 x 00000024 usually indicates some kind of problem with the filesystem (NTFS).

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Blue screen stop: c00002 / a (fatal system error)

  Blue screen stop: c00002 / a (fatal system error)

  the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

  I have dell windows XP home service Pack 3 computer.

  I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

  the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

  I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

  How can I solve this problem and get rid of the blue screen for good message?

  Hi C_O_A_C_H_11,

  Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• blue screen * STOP 0x0000000A in Windows XP

  blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition

  Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)

  blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed

  You get the following BSOD:

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)

  Hello

  This is my first post, please have mercy,
  I have a BSD at startup and this is the code that continues to show upward.  System Restore (from system repair and also safe mode) has not solved the teething problems.
  Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)
  I think the code means some sort of failure hardware, is anyway to deduce which device has failed in assessing these codes?
  Please let me know if I'm on the wrong track with a hardware failure, I appreciate all the advice.
  Thank you

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.

  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.

  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  (1) ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) make sure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update of the BIOS of the motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  (6) attempt (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  (7) as the last troubleshooting no invasive steps, perform a reinstallation of Windows 'vanilla': just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) if all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• service pack 2 Installation error blue screen stop 0 x 0000003

  Hello

  I was unable to download the Update Service Pack 2 on my Windows Vista forever.  Get the message every time I start my computer something like "error on blue screen Stop 0 x 0000003.  When I tried to download the 2 means of redress, both gave me the screens that says 'this update not supported'.  How can I fix it?

  Search for updates of hardware of your computer - including the system BIOS manufacturer.  Do not use all facilities built to perform the check - in fact visit the web page of your computer make & model and update the drivers for your system.

  You can also try this:
  How to reset the Windows Update components?

  (Try first the value default - restart and try your download again.  If this does not work - try the aggressive - restart and try your download again.)

• Blue screen STOP: 0x0000005C (0x0000010B, 0x00000001, 0x00000000, 0x00000000)

  WHEN I TRY TO INSTALL WIN 7 I GOT THIS HELP PLEASE
  Blue screen STOP: 0x0000005C (0x0000010B, 0x00000001, 0x00000000, 0x00000000)

  DN

  If you cannot start in safe mode and can not boot from the dvd, your options are extremely limited.  The fact that you can boot from Ubuntu suggests that something is wrong with e OS not material.

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K