How to recover programs and files that have been written too by a full system restore?
Original title: data recovery
Is there a program that will allow me to recover programs and files that have been written too by a full system restore? I had to do a complete system restore, because the computer has been locked up in a start of the closed loop cycle.
Hi Apmech9,
1. don't you restore the computer to factory settings?
2. do you just restore the computer to an earlier time by using the system restore feature in Windows XP?
If you restore the computer to its factory settings, you will then get in touch with the manufacturer of the system for more support options.
If you had just restored the computer to an earlier time using System Restore, you can undo the system restore to revert back the changes.
See the article "How to undo a restoration of the system after performing a system restore" in this article of the
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
How should I treat the files that have been opened by using my LabVIEW application?
Hello!
I want to put the code in my LabVIEW program that she will handle a file opened with. Let's say I have create my app as an .exe. I have my .exe associated with a particular file type in Windows. If the user double clicks on the file, it will launch my labview application.
How can I get the information in path of file of the file that the user has clicked on in my code so I can handle?
Thanks for your time!
-nic
@Ravens-
If you put:
SuperSecretPrivateSpecialStuff = True
In your file LabVIEW.ini, it will unlock an "OS Open Document" event to use in a block Structure of the event with a 'File Path' node on the left side. Whenever the application is launched via a file of the operating system, this event fires (even if your application is already up to-and-operational).
Works like a champ and is enough would apply us!
This method was published in the forums JKI.
-
Recently, I backed up my files, such as registered and deleted from my HARD drive. Restarting resolved a number of issues. Now, I need to restore specific files a few I.e. 'my music '. How can I find and restore individual files or folders WITHOUT restoring those that were responsible for the problems that CAUSED problems. I want to remove most of the backup and save a few folders/files.
How can I watch them? I tried to 'Search' for 'my music' and some specific mp3 and names without success.
See if this will help.
http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx
-
Cannot restore the emails and files that have been saved in an earlier version of Thunderbird
Thunderbird Auto-setting to update to the new version today (32.x.x). In need of a deleted message, I tried and failed to restore a MozBackup file that was created when running the version of Thunderbird (31.1.2).
Then, I downloaded and installed version of Thunderbird yesterday (31.1.2). I ran MozBackup restore and while he went at the end of Job without error, I do not see my older emails and local files. So now I'm totally lost and worried. I have the MozBackup.pcv file and a profile that seems to keep records, premises, etc, I need. But whenever I start Thunderbird, I am asked to set up a new e-mail account. After 7 hours of reading, searching and trying, I would appreciate guidance
Thank youGood to hear your problem has been fixed. You can mark it as 'Resolved' Please?
Thank you. -
Recovery system files - how to recover programs and files?
Thanks for reading this post.
I had to perform a recovery using F11, that my system would not initialize. Constantly, he'd say he was restartin with it turns ping pong balls, but would not load. Why it crashed is useless at this point.
I run Windows 8.1 and uses a HP15 f039wm.
I saved my backup files before continuing the recovery.
As it is now the USB that was copied in my office has a folder named "System Recovery Files.
There is no .exe file I can locate in the breast.
More precisely my concerns are two: 1) I bought a subscription to Avast and wonder if I can reinstll, don't know where my license key is but could probably contact Avast. (2) I downloaded Mozilla Thunderbird and have the emails and contacts from a variety of e-mail accounts and one account in particular I no longer have access to.
The $64 000 question is: can I get these programs works again with what I saved?
The issue of $99 or $14.99 per month over $ 35.00, fresh installation is, should I contact HP AND they would be able to fix if here, nothing works?
Thanks in advance and I thank you for anyone who can help on Thanksgiving.
You cannot reinstall programs from a backup. They must be reinstalled fresh. You may be able to save the backup of certain data related to programs.
-
How to remove Superfish and Rotatemyad that have been installed (slyly) to Foxfire
A 'popup' announcement itself injected in Foxfire. Lower left corner of the browser window is filled with an advertising window. It floats on the screen. It seems to work with Google, but according to Bing, it stalls and crash scripts. Often the browser crashing. It is not an add-on or extension, but the net has information on how to do to remove a similar addon. Perhaps their first version of this article more malicious. McAfee and ClamXAV can't. The only way to truly identify its source is to look at the Page Info, media and look at the location of the image.
This article seems to describe the same problem, I have experience but no validated solution.
http://StackOverflow.com/questions/18540776/shopping-guide-Onlines-com-SUPERFISH-com-injected-script-into-FirefoxClear the cache and cookies.
"Clear the Cache":
- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies ':
- Firefox/tools > Options > privacy > Cookies: "show the Cookies".
Create a new profile as a test to see if your profile is the source of the problem.
See "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
-
Is there a way to unformat a partition on a disk and recover files that have been on it?
IS ther a way to unformat a partition on a disk and recover files that have been on it. ? I used the command prompt utility to clean and reformat the partition? Is there a cancellation format and retrieve files, command that can do this? AND my next question is? WHY HASN'T SOMEONE MADE SUCH A PROGRAM? Believe it or not, it was the first time something actually worked for me in the command prompt? And now I need it back? LOL or is there a way I can get the pc to boot from C:\ By car? system is vista
Hello
Once it is cleared it is wiped
that this has something to do with remove you your recovery partition?
If Yes, read your other thread:
-
How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. I've just upgraded to El Capitan. Thanks for any help :)
I assume that you use the application overview.
I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key
and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save
pressing Save will close the image with the changes and then move to the next image and so on.
-
How can I retrieve files that have been combined and saved?
How can I retrieve files that have been combined and saved?
It was recorded, it has not come back.
How can I extract PDF files all at the same time in separate files?
I know that I can pull out them individually, but which takes entirely too long.
Is there a way to extract all at once?
If you have combined with Acrobat (or service Pack of PDF), so you should always have the individual original files.
-
Recover files that have been saved to the factory standard HP Envy 17
I thought that my d drive would not be affected by recovery-> procedure of the plant, so I lost my drive d: with music, photos and film, but it seems that they were saved by the program before the resumption of the proceedings to factory setting. How can I recover these files? It is not easy to see where you in the Recovery Manager.
SOLVED! I ran the USB Restore.exe and showed all the files that have been backed up. Easy, when you know :-)
-
How to disable programs and commissioning that run when you start Windows 7
How to disable programs and commissioning that run when you start Windows 7
Hello
References to Vista also apply to Windows 7.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns shows you the complete list of
Locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxMonitor Monitor - free - file system, registry, process, thread and
Activity of the DLL in real-time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.
It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.
Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.
Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.
-
- Question
When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?
Hello.
I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.
I'm sorry I can't be more helpful.
-
I cut and pasted and then a few important files from my laptop on an external hard drive. Since the external hard drive stopped working. Is it possible to find the files that have been moved?
Thank you!
(More info: I tried to recover the files from external hard disk but it requires a physical recovery and would cost over $ 1000, which I did not; also unfortunately I don't think I created backup via the "backup and Restore Center" files in the control panel).
It depends on how long you have moved the files, and how the computer has been used since.
If you have Vista Business, Ultimate or enterprise, you can use the previous versions.
Try these programs:
- Free: http://www.filehippo.com/download_recuva/
- $99, but the free trial version to see if it works before paying: http://services.seagate.com/eStore/Seagate-File-Recovery-for-Windows-P32C1.aspx
-
Why I can't move or delete files that have been used by Windows Movie Maker?
Why I can't move or delete files that have been used by Windows Movie Maker? How to make them free again, now that I want to use the new computer.
When you create a project in Movie Maker-.mswmm file... it
records the path to the source (photos, videos, music) files...
If you re-open the file .mswmm to re - edit source files...
are not accessible if they have been moved or deleted.If "no" re - edit project .mswmm files...
moving or deleting the source files is not a problem.If you 'are' the intention of re - edit .mswmm files but need the
source files also... just make copies and let it
original where they are.
Maybe you are looking for
-
I just got a 6 TB hdd and installed to find that when I open my computer, it is not recoginize, so I went to disk management and he sees the car but the capacity is only 1.5 to. Ive been looking for a solution for this, but cant seem to find somethin
-
HP Z420: Turn off the flashing light blue when in mode 'sleep'
The blue light on the front of this workstation mode 'sleep' is very bright and very Bill. I'm worried, it's to keep my dog to enjoy a good night's sleep to to have resorted to turning off the machine. I enabled / disabled ' Unique sleep state Blink
-
HP C5180: Printer color problems
I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix th
-
Full-screen live YouTube or Vimeo
I am trying to create an article of smooth scrolling that has online video. I would like the user have the possibility to watch the video online or play the video full screen. I have 2 questions:1. I've seen on some of the other apps AEM when you pre
-
I have a HP p6140a and nothing appears on the U tube without it in dribs and drabs. Need you 3/4 of an hour to download 2 minutes video. Some have suggested more ram. Someone can advise me please and is easy to install ram? I am using Windows 7 Home