How to recover programs lost after the computer has been repaired?
Original title: ACER laptop help
I recently had some work on my laptop ACER Aspire 5515 and the guy who worked on it took a bunch of programs out of my computer to help with the repair. I don't know what all he took off, but I want to recharge my desktop computer with all of the programs that came with it when I bought it. I do not know a program I want to come back is the one where I can play a DVD. I can play is no longer a. The initial problem was that my mouse arrow was frozen on the screen and would not move. Any help will be greatly appreciated.
Hello
Check with the Acer support because they would have provided additional programs that came in the
the factory computer. You can beed to buy the original installation so support these programs
are provided in this topic. This disk should be pretty cheap since your already own Windows.
Acer - USA - Service and Support - drivers
http://us.Acer.com/AC/en/us/content/support
Acer - worldwide
http://www.Acer.com/worldwide/selection.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
How do to get the documents after the computer has been infected by a virus and wiped
Hello
My laptop works most completely and there was a humming noise whenever I tried to start. I learned that the laptop was corrupt. I was informed by the customer service to clean the laptop. In doing so, all parameters resumed those available at the time of the purchase in 2008.
How can I recover all my documents, pictures, etc.? I take the laptop to a computer technician to help with this.
Can also advise you how to make a backup of all items stored on my laptop please.
Kind regards
J.
Wiping the phone clean and restore to factory condition as advised by "customer service" (that may be), you actually deleted all the files that were on the computer. Recovery, even by a specialized at great expense data recovery company will be at best fragmentary.
I'm moving your question to the forum space Windows for system repair and recovery, where it is possible that you may receive some additional tips, but I think that you can simply cut your losses at this point. If there is a hardware problem that caused the initial symptoms, it is likely that you will face more questions and data loss unless you get the hardware repaired/replaced.
-steve
-
My computer is infected with this wirus and my wirus program can not take it away from the computer, it make the computer very slow at the beginning, what should I do?
Hi Andersjohansson,
Method 1: To fix the performance issue, follow the steps mentioned in the link below
Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Run Microsoft Security scanner (MSS) for any threat of remnant and try to correct
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Infected files can be deleted from your computer; There is a chance of data loss.
-
Webcam works only with Windows 7 after the computer has been cleaned.
original title: WebcamsI had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?
Hello
Each manufacturer of system or camera maker provides their own software to control the camera so
You should check with their support, their books online and ask in their forums (if any).You probably need to recharge the device drivers and camera control software (usually included
with the drivers and installed at the same time).Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Manually look at the sites of the manufacturer for drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
-
Internet E8 freezes, usually after the computer has been idle for several hours or overnight
When I run internet explorer fix - it tool, it gives me an error message - "has encountered a problem and cannot continue." What is one to do?
Hello
- What fixit did you run?
If your Internet connection is very slow, you can follow this link.
http://support.Microsoft.com/kb/926449
You can also try this link.
Note:
Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Hi all
How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.
There is also a checkbox on the dialog box 'Sign' to lock document after signing.
-
APP said file is updated, but it is not installed on the computer (has been removed because it does word not running). Now, I can't update or download!
Office CC lists the applications as "up to date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-
Exception of Tomcat may not call sendError() after the response has been committed
CF 10 Developer Edition.
Windows XP SP3
When you submit a page that worked well in CF 7 on this machine, I get an error that I've never seen elsewhere:
==================
HTTP 500 - STATUS
Description: the server encountered an internal error () that prevents to satisfy this demand.
exception:
javax.servlet.ServletException: ROOT CAUSE: java.lang.IllegalStateException: cannot call sendError() after the response has been committed to org.apache.catalina.connector.ResponseFacade.sendError(ResponseFacade.java:451) to javax.servlet.http.HttpServletResponseWrapper.sendError to coldfusion.tagext.io.cache.ehcache.GenericResponseWrapper.sendError (GenericResponseWrappe r.java:91) at coldfusion.filter.FormScope.parseQueryString(FormScope.java:501) (HttpServletResponseWrapper.java:1 20)
etc., which ends in
Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.23 logs.
===================
I can't seem to be able to debug or to locate this error: cfabort placed at strategic locations doesn't help at all, and none of my usual work. Debug information are not displayed when this error occurs (although the server is configured to display debug information, and she normally does).
Totally puzzled.
LBPSlava
Maybe adjust the number Maximum of say 100 to 500 POST request parameters.
CF10admin > server settings > settings > request size limits > Maximum number of MESSAGE request settings > value
Not sure, you may have to restart CF10 for change to be applied.
HTH, Carl.
-
After the update of Sierra once the photos has been repaired all of my albums have been removed from my album of videos from photo library and all, only defalt albums that are there are people, last imported and my photo stream.
If the videos, Burst, Slow Mo, time, selfies are all gone?
Please help someone
Videos are, Burst, Slow Mo, time, selfies albums in the missing sidebar or the content of these missing albums?
You have a copy backup of the library made just before your Sierra improvement?
-
instructions on how to get your photos back after your computer has been deleted and the
my computer has been deleted and my photos from my photo file. so I wonder how I can get all my photos if I can at all... my computer was giving me problems and saying that the hard drive has been mess up so I went back and restored my programs and it restored everything but my photos and other files, that I would just get my photos.
How exactly do you run restore?
If you have used a disk recovery or a recovery Partition...
to reinstall your system as it was when you first
bought it... your personal files may be missing
unless you do backups on an external support.There are programs of software designed to recover the
deleted files. The following freeware is an example...
a Google search will find more.If there is no file on your hard drive with
not been crushed... There is a little chance that
You may be able to recover some of them.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Recuva - file recovery
http://www.Recuva.com/Introduction of Recuva (tutorials)
http://docs.Piriform.com/Recuva/introducing-RecuvaThe following article can be also worth a visit:
How to recover files deleted with free software
http://Lifehacker.com/393084/how-to-recover-deleted-files-with-free-softwareGood luck.
-
When I open Firefox, it opens to the iDIVI homepage. As far as I know, I have never agreed to this amendment. Why what happened? My computer has been corrupted? How can I remove this and continue to have firefox as my homepage?
You can use the SearchReset extension to reset preferences to default values.
Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).
Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.
The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
You can check its contents with a text editor (right click: open with) If you do not create this file yourself.The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.
Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.
You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
-
Help for resettlement after that computer has been deleted.
So the difficulties technical, my computer has been deleted, but I have some backup on an external hard drive, such as my Adobe Photoshop application and folder. I tried to open it but I got "error 16" so I followed the steps in Mac Os to solve this problem, I did. And it still does not work. If someone could help me with this since I was a photographer and need my CS6, I would be extremely grateful. Thank you.
Transfer of programs will not work. You must install using the installation files and your serial number.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
"Kick" application user after the password has been changed.
Version of Application Express 4.2.4.00.08 apex
I would like to "kick" current application user once the password has been changed in the database.I've customized auth which takes the database password.
Currently if someone enters my application > after that I change his password > it is still able to go through the application and present things
I want to make is that after I change his password for the current user gets "expelled" from the app to the login screen.
Para wrote:
Version of apex Application Express 4.2.4.00.08
I would like to "kick" current application user once the password has been changed in the database.
I've customized auth which takes the database password.
Currently if someone enters my application > after I have change password > it is still able to go through the application and present things
I want to make is that after I change his password for the current user gets "expelled" from the app to the login screen.
Capture logon after user/password hash and store it in a part of the application. Create a On Load: before header process application which runs under condition if the hash of password/user session is different from the one currently in the database, the call
apex_custom_auth.logout
. This will disconnect the user on the first page is rendered after the password is changed, but will (in most cases), save the changes before you do. -
You need to download/Reinstall RoboHelp 11 once the computer has been reimagee.
My computer has been reimagee and I need to download and reinstall Robohelp 11. I don't want to upgrade at this point. Where can I find the download appropriate for 11 RoboHelp?
Thank you.
Contact the Support from Adobe. They can give you access to older versions if you can prove the purchase.
See www.grainge.org for creating tips and RoboHelp
-
How to recover messages lost after upgrade to El Capitan
After the upgrade to El Capitan! 0.11.3 much mail in Apple Mail has been lost. How can it be recovered?
Your Time Machine backup. Mail (Yosemite): restoration of the mailboxes and their content in
Maybe you are looking for
-
change password login
-
installed no comm with the pilot program
Hello I have developed a small program DAQ in LabView (2013) for a "quadrupole mass spectrometer (MS) Extrel" using the very nice company LabView driver provided. The mobile developer is a win7 x 64 system with LabView2013 Pro. The soft Extrel is ins
-
all-in-one 7510 loses the wireless connection
We just bought a HP Photosmart 7510. She created fine with a wireless connection to our office for Vista 64-bit. After awhile, he loses the wireless connection. If I close the printer then turn on again, it resets the connection and works very well.
-
Why is my Service Provider Null?
I had a problem with my profile setting, where it has a field for service provider, it says nothing even after several times to enter my info. I have Verizon, but even after the update, it always says null. Will this affect my participation to MFN? A
-
Hi all We have migrated the 12.8 TMS from the device to the TMS 13.0 on the VM platform. There is no matching TMSPE and mainly used for management and directory service. Once the migration is complete on the platform of the VM, we found that endpoint