How to recover the original features after installed CC

Similar Questions

• How to recover the original file names?

  Hello! Please help me.

  
  

  Accidentally, I changed the names of the videos that I used for Adobe Premiere. So now, every time I open the folder Adobe Premiere, videos are missing and replaced with a red screen "media disconnected". Is there any way I can recover the original file names without having to do it manually one by one?

  
  

  I tried to go back to a restore point, but it does not work. I can't locate too because I don't remember which video is which.

  
  

  I already edited almost 50 videos in this project it would take me a loooot of time to start all over again. :((

  
  

  Hope you can help me.

  If I understand you correctly, you changed the name of the file in Windows and can't remember what used to be file names. You have modified these in Premiere Pro, and now the project files, that you created do not know where to find the video files.

  Is this correct?

  If so, I may have a simple solution for you.

  Assuming that you're not maxing out every file so that they are all exactly the same length, the number of minutes and seconds and images should get you where you want to go. Almost as unique as a fingerprint on my PC, but I never capture a bunch of videos which are identical in time - although it is possible to do, I guess.

  Open a project file. Checking the properties of each file should reveal the name of file theoriginal and duration, which is also available directly on the thumbnail image (see image below).  Open the media browser, then look at the times on each clip. This should be enough to help you either republish or change the Windows name to what it was originally. It's always one at a time, but it shouldn't take too long. A pen and paper could help 50 videos.

  

• How to restore the original partition after reformatting accidentally installing windows 10

  See the problem below. I can not get a USB stick formatted with FAT to be recognized by bootcamp or to download the drivers to continue.

  The problem occurred after that my son wanted to re - install windows 7 after that that he has been upgraded to windows 10 and utilities disk to reformat the drive hard windows installed.

  

  OS X Terminal, you can post the output of

  diskutil list

• How to recover the product key after formatting?

  Original title: ask

  Hi, I formatted my hard drive of the PC... and I lost my product key. you will need to recover my product key. What can I do? Help me please!

  Hello

  If pre-installed, look for the PK on the COA sticker.

  The COA sticker is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  If you can't find that, order the recovery media from the manufacturer of the computer that must install without your input of a PK.

  Check with the manufacturer...

  See you soon.

• How to recover the original OS during installation of a different operating system

  Hi all

  I have a problem with my Thinkpad x 201. Original OS was Windows 7 Pro 64 bit. I installed Windows 7 Ultimate 64 bit on the main data partition and so I lost my original OS. But the partition recovery and partition of 1 GB of smal (system_drv) are still intact! Now I can not access the recovery partition in windows, nor can I access the ThinkVantage button at startup.

  I found something on the similar problem - linux installed, but not Windows.

  So can I get original OS and how to do it without having to purchase recovery discs?

  Thank you very much for the help.

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/making-a-USB-stick-with-the-Lenovo-recovery-PA...

• How to recover the XMLP report after publication

  Requirement:*.
  There is a custom created page that has some data (all data is display only) on level 1. There is also a link on that level 1.
  When the user arrives on this page for a particular search (from the search page) values and on a level 1 line and click this link, an XMLP report must be generated and open.
  When the user comes to the same page with the same values of research and the same line at level 1 later, after some time/day, the XMLP report which came already should open instead of generating a new report XMLP.
  Therefore, the XMLP report has generated only once for a particular line of level 1 and should now be reused.
  
  Technique of the logic applied so far:*.
  The logic was written on the component.record.fieldchange of the link level 1.
  I was able to generate the XMLP data file. By using this data file, I was able to generate the report (in PDF) and publish as well.
  
  Creates the object:
  & oRptDefn = create PSXP_RPTDEFNMANAGER:ReportDefn(<Report_Definition_Name>);
  & oRptDefn.Get ();
  & oRptDefn.SetRuntimeDataXMLFile (< XML data file >);
  
  Set the outdestination:
  & oRptDefn.OutDestination = < Some Unix Path >;
  
  Report of the process called:
  & oRptDefn.ProcessReport (< name of the report definition model >, % language, date, & oRptDefn.GetDefaultOutputFormat ());
  
  And published:
  & oRptDefn.Publish ("PSUNX", "", "", 0);
  
  The report is published. I can view the report in pdf format on
  Main menu > Reporting tools > XML editor > search for XML report
  
  Question (which is also a roadblock):*.
  Now how should I proceed in order to open (display) the same report when the user clicks on the link to the level 1 again.
  How can I reopen this same report next time?
  I was wondering that if I get the report Id, and the process Instance (as displayed in the search for XML report), I can save for later use. So I can dynamically create the report using these 2 URL identifiers when the user clicks on the same link next time. But not able to get the correct values of these properties.
  After publication, & oRptDefn.ProcessInstance gives 0 instead of the process instance, as shown in the XML report search page.
  
  Please help with your expertise.

  The instance of the process number is automatically filled by PeopleSoft during the call to publish. However, the problem is that you cannot recover the instance number of processes assigned by PeopleCode after the call to publish. I think that this property has a use when you run the report through the process scheduler and not the application server (which is the case in this situation).

  Take a look at the PSRF_RINFO_TBL notice. In this recording all the XMLP reports will be stored by the report URL. Your condition said that when a user enters a component with a certain search criteria and a report has already generated so that criteria at level 1 should link to open that specific report. With the file PSRF_RINFO_TBL, you know what reports have been produced so far. The only thing you need then is to link a report to a specific search criteria. If you run a SQLExec on the PSRF_RINFO_TBL after you have published it you should be able to recover the process instance and the content id. If you add a record or some fields of the record exist for this component, you can bind the instance of process/contentid to search criteria. If a report already exists, you can use the code I posted in my previous post to open the report on the screen.

• How to recover the DVD drive after Windows XP Service Pack 1 upgrade on protected M200

  I lost my DVD Multi writer after update WInXP SP1 on my M200 Tablet of protégé. Restarting ElbyCheck reported a conflict with v3.00189 drag ' n Drop. I chose (foolishly) to solve it.

  The situation is pretty much as described in FAQ ref: TRO0000001bf9 (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000001bf9

  Is it possible to reinstall the drivers and get the DVD without having to completely restore the tablet at its factory image?

  The good news is that the DVD works - it properly allows the Recovery DVD-Rom Toshiba to initialize. The DVD is mounted in the docking station for M200 Tablet and I don't think that there is another way to connect to the tablet.

  Windows XP Device Manager reports a problem with the Mat * a DVD-Ram UJ-810 USB device: "Windows cannot load the driver for this hardware device. "The driver is maybe corrupted or missing (code 39). However, uninstall or reinstall drivers does not help because Windows XP shows that the current drivers are installed. With SP1, there is also no earlier driver to roll-back to...

  Is there a way to get the right drivers reloaded?

  Any help is very appreciated!

  Bo

  Helloo,

  I know that is not the same question, but you can try the steps below mentioned since it is the same error message and there seems to be a flaw in the XP registry

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

  It may be useful

  See you soon

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

• How to get the original item_property after have changed at runtime

  Hello
  
  for example:
  
  in my form there is an ITEM_A defined with VISUAL_ATTRIBUTE = "ABCD_RED".
  
  while executing, this property turns into "XYZ_GREEN".
  
  Set_Item_Property ('BLOCK_A.ITEM_A', VISUAL_ATTRIBUTE, 'XYZ_GREEN');
  
  Now I can read this property of Get_Item_Property - (real function, it is "XYZ_GREEN")
  But what about the origin of property "ABCD_RED".
  
  Is it possible to get the origin of property on a direct question to my form
  without saving it initially in time?
  
  Thank you
  Norbert

  You can save it in a variable before editing or you can reset the property to the original value that was set at design time.

  SET_ITEM_PROPERTY('my_item', VISUAL_ATTRIBUTE, '');
  

  Just use two single quotes without space between them "and the property will be reset to what it was at design time.

  Tony

• Satellite L300 - how to activate the RW function after installing xp?

  After my laptop was repaired with a new hard drive, I installed xp instead of vista.
  Now I can use the dvd rom for watching movies and install programs, but it is not accessible to any blank discs.
  The error window comes out whenever I have insert the drive empty and click the dvd rom.
  And the size of it always shows 0 bytes. CD or blank dvd-smoking works.

  Because it's a dvd/RW rom, usually I can just open and drag any file I want on the disc and then burn easily.
  I already updated the firmware driver.

  I wonder what the problem of the xp system that blocks the RW function?

  Hi mate

  Check the suggestion posted by Akuma.
  But, in addition, you can check if the write option is enabled in the ODD properties.

  For this, go to my computer-> CD/DVD drive properties (right click / Properties) registration mark called the option activate the writing of CD on this drive

  Welcome them
  Jack

• On the screen keyboard, how to restore the original size after maximizing

  I used the Task Manager to maximize the on screen keyboard and now to restore its original size, but can find no way. XP MCE SP3.

  Thank you, but no joy there.

  Gathered the courage to dig into the registry and managed to restore the osk, so, for recording answering my own post. After some nosing around, I ended up export

  [HKEY_CURRENT_USER\Software\Microsoft\Osk]

  a user account who have an osk immaculate and imported to the account with the enlarged osk... it worked. Parameters has dozens of bytes, and 13 were different between a regular osk and a maximized. Anyway, problem solved.

• How to keep the original path?

  How will keep the original path after conversion to describe stroke. Sometimes, but I don't know why?

  If the path has a fill it will be the path for the filling as well as the contours of the race. For closed paths that is.

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• How to recover the PSADMIN State of origin user profile?

  People,
  
  Hello. My user ID to log in the application designer is "PSADMIN". I just created PIA. "http://localhost/psp/ps/?cmd=login" accesses PeopleSoft access code page, and I use "PSADMIN" to connect. I can open all web pages after login. "PSADMIN" is the access profile and user profile.
  
  But after I create a "newUser" role and assign a list of the permissions for the role, then the role "newUser" a link to the user "PSADMIN" profile, I can't open most web pages after login in PeopleSoft signon page using "PSADMIN". The system get the message: "you do not have access to the collection of Navigation. Please contact your portal administrator.
  
  Can any people tell me how to recover the profile user "PSADMIN" State of origin so that all web pages open after the connection?
  
  
  Thank you.

  go to PIA by using a root as VP1 or PS user and remove what you added to the PSADMIN.

  If you have locked your root user by chance... unlocked by using backend.

  PSOPRDEFN TABLE, unlock root user using the acctlock update.

  then sign in using that and make changes to the PSADMIN. or just the background, you can delete the additional role of PSADMIN profile using the same table.

• How to recover a file photo after emptying the trash

  How to recover a file photo after emptying the trash on my Mac book pro?

  Thanks for your response

  Restore your time machine backup file.