How to recover the Windows Vista operating system on laptop

I have unix opreating system in my laptop (exhaust). First of all I can get all my documents and application. Secondly, how can I recover my window vista opreating system. Please give me your advice.

* original title - how to get back my window visited opreating system *.

Programs must be reinstalled from the original media: CD, DVD, etc..

Save your data on external hard drive, Flash drive, etc...

Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://support.Microsoft.com/default.aspx/KB/326246

'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

    I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

    Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

    Please see return, cancel or Exchange an order - Adobe

    http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • The Windows Vista operating system on dv9000 was arrested.

    The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

    How can I get my BONES restored without having to buy a new one?

    lbwhorms wrote:

    The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

    How can I get my BONES restored without having to buy a new one?

    You may need to contact HP in your region or Microsoft by phone.

    If he please go through these papers & try the above first steps:

    Activation of Windows Vista operating system

    You may be prompted to activate Windows Vista on a computer on which Windows Vista has already been activated by a license in Volume or OEM installation

    Concerning

    Visruth

  • I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

    Hello

    I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

    After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office.  Old software active sync is not compatible with Windows Vista.  At my pocket PC eventually become outdated.

    Hello ariccia473,

    Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
    http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

    If this isn't the case, then you will need to check with Dell and see if they can be of support.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I forgot my password in the windows vista operating system how to recover it?

    Mr President, I forgot the password to my windows vista. Now I need to change the operating system, but she asked how to change this password password I don't know what password I kept it. Please help me solve this.
    Thanks in advance.

    Hello

    If you are referring to the BIOS password, you can request assistance from the manufacturer of your computer; We cannot help you.

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

  • How can I reformat my laptop with the Windows Vista operating system?

    Hello

    Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

    Hello

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • How to completely uninstall AutoaaCad 2006 of my laptop with the Windows Vista operating system

    I have already installed AutoCad 2006 on my Windows Vista Home Premium & found that it was not compatible. I don't then later uninstall but every time that I do a system scan, I still see a huge amount of this AutoCad components scanned record (the location of this software that appears in the scan's Office & yet there is nothing yet on my desk). I just clicked on the Start button & then typed the word "AutoCad" in the search box & found 2 components of AutoCad namely 1) Autocad Textstyles and types of line;
    (2) autocad.
    Please help me remove these - they take too much space on my drive.

    Hello

    try to see here, that might help you:

    http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=2887771&LinkId=9240617

    LC

  • Cannot access the Windows Vista operating system

    I read many entries of Vista users have the same problems of power outage, my laptop Dell just meeting after an update from Ms.  I can't access my operating system Vista same not the log in page after many attempts to solve the problem, starting with all the pre boot options on the f12, f2, f8 recovery CD! No go on all suggested corrections.  MS did NOT address this issue properly given what I've read.  MS is directly responsible for this problem and I ask a fix or a solution with no cost to me.  It wouldn't surprise me to learn that it is an intentional malicious attack by MS and or its subsidiaries.  I want some solutions and the solutions to this problem of power outage.   My computer hardware and memory passed check system tests.  I expect a response soon from MS, you have my email address.

    Original title: Vista is DEAD

    I read many entries of Vista users have the same problems of power outage, my laptop Dell just meeting after an update from Ms.  I can't access my operating system Vista same not the log in page after many attempts to solve the problem, starting with all the pre boot options on the f12, f2, f8 recovery CD! No go on all suggested corrections.  MS did NOT address this issue properly given what I've read.  MS is directly responsible for this problem and I ask a fix or a solution free of charge I. It wouldn't surprise me to learn that it is an intentional malicious attack by MS and or its affiliates.  I want some solutions and the solutions to this problem of power outage.   My computer hardware and memory passed check system tests.  I expect a response soon from MS, you have my email address.

    Hello

    It is a community facility by Microsoft, but we're especially of volunteers helping posters for free, so there is no use demand anything from us.

    And Microsoft does not intentionally try and destroy their own business by doing what you claim they do

    We can try and help you with your problem, but if you have a complaint against Microsoft, you will have to contact Microsoft directly.

    _________________________________

    Information about updates:

    "Sometimes Microsoft offers updates for the 3rd party hardware: graphics, network cards, etc..

    You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

    But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update'

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or show an update of Windows Vista"

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html

    "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

    _____________________________________________

    Here's how to chanage update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the performance and security of your system"

    ________________________________

    Startup Repair:

    You can do a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    ________________________________

    Dell-information:

    Here are the options of relocation:

    How ro reinstall from the Dell recovery partition:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

    Reinstalling the printer Dell supplied disk:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

    And I hope that these links should provide an explanation for all of your problems:

    Reference Dell troubleshooting with startup problems:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

    Run the built-in diagnostic software:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

    And if this does not resolve your problem, please contact Dell:

    http://www.Dell.com/support/contents/us/en/19/category/contact-information

    Or you could ask their Support Forums:

    http://en.community.Dell.com/support-forums/default.aspx

    See you soon.

  • Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

    My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    Hello

    This Dell 2000-0146 error code is for a failed hard drive / failed.

    You will need to replace and reinstall the operating system.

    Save your data as soon as POSSIBLE.

    See you soon.

  • Menu of start-up poster that the Grub boot driver is missing when trying to load the Windows Vista operating system

    I was dual-boot my computer with Windows Vista on it with Fedora 12 via a live dvd that I got installed. I kept only Vista because there are several programs that I use and are not able to be run on Fedora 12 no matter what I do (including the use of wine). Unfortunately, when I tried to start the operating system from Vista instead of Fedora earlier this morning, he told me start Grub pilot was missing and so Vista could not start.
    I know that during the installation of Fedora I has not damaged partitions for Vista, simply using the unused space on my hard drive. Is it possible that I can restore Vista for a capacity of work without having to uninstall Vista and reinstall? Some of my programs will have to be bought out if I do this, because of the way the company has implemented.
    I tried using the Startup Repair feature and my repair disc, but I can't for some reason any. My computer was giving me a lot of trouble with Windows, even though is it's original OS.

    Hi Alice,.

    Linux boot partitions could have been corrupted. Therefore, you have to communicate with Linux to rebuild the Grub.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Download the Windows Vista operating system

    Hello - fried my hard drive and I lost the recovery disc that is used to configure the computer.  Can I re - download a trail version and use the key code to activate windows vista?  Everything I see live is the download of service pack 2.

    Contact manufacturing and ask a set of recovery discs, if they have, it should be that causes a small fee.

    There is no "Trial" version that I know.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Can not find the drivers for a HP 1000 Laserjet Printer to use with the Windows Vista operating system

    Are drivers available for this printer... anywhere?  Thank you!

    Hello

    below link is to HP of information available for this model of printer drivers

    HP has written drivers for their products non-microsoft

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=45675&TaskID=135&prodTypeId=18972&prodSeriesId=45674&lang=en&cc=us

  • Hello. Can you help me get my built in webcam doesn't work on my Advent laptop with windows Vista operating system thanks

    Hello. I have a very nice laptop Advent and would love to get the built in Webcam work. Can you help me please? I have the windows Vista operating system. Thank you jeremy in Great Britain

    PS my grade o level B in computer science from Cambridge arriving 1984 useful! Thank you

    Hi Jeremy,.

    1. what happens when you try to access the webcam?

    2. have you updated the software and drivers for the webcam?

    You can check if the webcam is detected in Device Manager and also try to update the drivers.

    a.Click Start and type device manager in start search and press ENTER.

    b. in Device Manager check if the Webcam is listed.

    c. right click on the webcam and try to update the drivers.

    For more information, you can consult the following article:

    Updated a hardware driver that is not working properly

    You can also see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer. You can also ask advent and are looking for the same thing.

    Support of advent

    Hope this information is useful.

  • I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

    ===============================================
    You can resize a picture in WLPG but if you want to change the .dpi you
    need a different application.

    Information about resizing...
    Right-click on one or more selected inches... Choose... "Resize" in the menu.
    Choose a format, access a folder to save in the left click the ' resize and
    Save "button. (I suggest that you save the photos resized in a new folder
    to prevent the replacement (replacement) the originals)

    Take a look at the following link:

    Resizing Photos in Windows Live Photo Gallery
    http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

    In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
    and go... Image / information. Enter the resolution you want in the resolution
    fields and on the left, click change. Then go to... File / save as... and save
    your photo altered with a new name.

    IrfanView
    http://www.software.com/IrfanView
    (Download plugins too)
    http://www.software.com/IrfanView-plugin

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Maybe you are looking for