How to register ActiveX exe server for all users

Similar Questions

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How to set preferences of creation for all users - machine laboratory at the University?

  I'll put up for our University editing room which has a CC license "per machine". It is a PC facility. This machine will be used by a class of students who will register with their own credentials. I need to set preferences for the first (video output, default working space planning etc. discs) so that it is the same for all users connecting from us want a consistent configuration for educational purposes and not want to help every student to configure so that it displays correctly on monitors. Is there a way to save this default setting for each user?

  The most important of them is the preferences - reading to set up the second monitor.

  Post edited by: Bruce Cooke

  Just copy the files preference and workspace of your user folder.

  Mylenium

• How to put a common page for all users after loging on?

  Hi all
  "My dashboard" is now the default page after logon.
  I want to put a home page by default for all users. users can see the homepage after loging on.
  
  How to change the default dashboard "My dashboard" to the "Home page" for all users?
  
  Thank you
  Dan

  Hello

  Steps to follow:

  Tried to put the default dashboard for all users.
  1. creates a session init block
  "2 source of data used in select ' / shared/SH Test / _portal / Test1" double
  3. This value assigned to the variable of session CHEMINPORTAIL
  4. in presentation services > Administration > my account > default dashboard must be set to "default". Then only the dashboard specified in block init will appear otherwise my account will override the init block.
  5. save the changes to the RPD.
  5 disconnect and reconnect to see if it works well. It works perfectly fine.

  For more details, please see the document of CSG replication. But this is for all users.

  If the customer wishes to have a user/group basis homepage.
  1. they should have 2 separate tables.
  i. Group_path_tab with 2 columns. Group_id, portal_path
  Wise group path portal for all groups
  II. user map table group
  Group_id, groupname, user_id

  The user should be part of a group.

  2. then in the writing init bulk sql must be something like this

  Select A.portal_path in the Group_path_tab A, User_group_map B
  where = B.user_id: USER
  and B.Group_id = A.Group_id

  SO, based on the USER session variable, it will try to identify the group, and then the portal_path.
  Finally, set this value to the session CHEMINPORTAIL variable.

  Ref:
  http://total-bi.com/2011/01/OBIEE-11g-change-default-dashboard/
  Thank you!

• How to create a default profile for all users of Firefox 9.

  I run a computer lab and am looking for a way to create a default profile in Firefox 9 that allows new users. I want them to be able to launch Firefox for the first time and see my home page. I want to disable any control for default browsers, firstrun pages or all the other guests.

  The former for group policy .adm files did not work longer.

  See http://www.frontmotion.com/Firefox/howtodeploy.htm

  You can create a defaults\profile file in the Firefox program folder and place the files that it be used to create and initialize a new profile.

• How to create a default profile for all users of a computer under Windows 7/Vista for Firefox versions greater than 8? I would that all new users on a computer to get the same values by default, homepage, bookmarks, etc...

  I found some help on older versions of Firefox, but I can't seem to find anything for the latest versions greater than 8. There must be a way to do this for imaging large scale.

  Have you created a defaults\profile in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\)?

  All files in this folder will be moved into each newly created profile folder.

  To give the prefs a default, it is best to do this via a mozilla.cfg file.

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.
  
  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

• How can I disable the MonitorPrintJobStatus on Server 2008 R2 RDS for all users?

  We have a Server 2008 R2 RDS with HP LaserJet printers installed.  At every printjob printer monitor HP arrives.

  How can I disable this printer for all users?

  THX

  Tcpip

  I found it here:

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/c00767072/c00767072.PDF

  the registry key is

  SSNPNotifyEventSetting REG_DWORD 0x00000001; 0 = disabled.

• 2 How to save the settings for all users.

  I recently had to move the hearing to a vista machine.

  Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

  But now that I put it in place under my profile how can I keep those settings for all users?

  When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

  So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

  (Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

  Thank you.

  Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

• How to disable "Show indicator of overflow for the text field" for all users on a Terminal Server.

  As the title suggests, I am trying to disable the "show text overflow indicator field' for all users that connect to a remote desktop in Windows Server 2008 R2 server. The Adobe Reader software version is 9.0.

  

  Looks like we have found a solution. We had a group of "update" policy the registry for the current user on login.  It's the key, you need to add in a GPO / your domain controller. In case you can't see in the screenshot, here's the path full key: Software\Adobe\Acrobat Reader\9.0\FormsPrefs
  

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• How to get an extension of the dictionary for all users in a Citrix environment?

  Hi all

  Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

  It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

  So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

  "A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

  Then follow one of the following options:

     Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "
  

  Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

  Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

  Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

  Any help/advice/shots of elbow in the right direction would be greatly appreciated.

  It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.

• How to create your default desktop for all / some users?

  Using Vista business I want to create a desktop computer by default for all users. How can I do this?

  I have a machine that has a dozen accounts. Can I retroactively apply this desktop computer to some existing accounts?

  Thanks for thehlp

  Joe

  Discussions on the topic "Change the profile by default in Vista"
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/62ed66ad-71cd-43C3-83c0-5303d77176b8/
  by Heather

  "How to make a standard profile w / user by default.
  http://forums.techarena.in/Vista-Help/1065679.htm
  by Darrell Gorter [MSFT]

  How to create the default profile for Vista
  http://help.Lockergnome.com/Vista/create-Vista-default-profile--ftopict15825.html
  Darell Gorter mentioned here only taken methods supported to change the default user profile:
  "How to customize the local default user profile when you prepare a
  image of Windows Vista, Windows Server 2008, Windows XP, or Windows Server 2003"
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 959753
  but when you go on the link says the Tip system is not for Vista, on Windows Vista title is missing.

  I hope I could help

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• How to activate permanently on "Show processes for all users" in the Task Manager

  I have a facility with windows 7 installed twice.  will receive run the Task Manager in the initial installation of windows the "show processes from all users" is checked by default and visible.

  However, in the second installation on a spare drive will receive run that task manager this option is converted (boxed) and must be clicked but the machine doesn't remember this setting.

  How can I get windows 7 to continuously show me processes for all users?

  Thank you footoomsh

  Hello

  Are you logged on as ADMINISTRATOR?

  The Task Manager - create a shortcut high
  http://www.SevenForums.com/tutorials/10499-Task-Manager-create-elevated-shortcut.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.