How to reinstall the operating system after the broken hard drive partition?

Similar Questions

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• How can I reinstall the operating system on a new hard drive?

  I strongly suspect failure of hard drive on my old computer XPS 420. Data recovery isn't a problem. However, because the way I too lazy to buy a whole new operating system, is possible that I can transfer the installation of Windows Vista on a new hard drive? I told me that Dell will send me an installation disc to do, but how to make a record like this, and is there another way?

  I'm thinking of ghosting the HDD on another and the use of the recovery for nuke partition in a new facility, but it would even work?

  Thank you

  SnarfTCat

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.
  
  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  What is obtaining a disc from the Dell operating system Vista OEM [If Dell still copies of this available media], but you can be out of luck unless you have a warranty from Dell, but it's worth a try to see what is happening.

  If you reside in the United States, or the Canada and are the registered owner of the computer, with an active warranty, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may impose a charge for the disc.

  If you do not live in the United States, contact the Support from Dell, which is located in your country.

  Bev.

• How can I move my operating system to a new hard drive or other solutions, must be the Media Center

  My computer a gateway 815GM Media center PC has become black and start with some gray characters and words back up your data and replace the hard drive is bad. (or similar) My question is how can I move the operating system Windows XP Media Center Edition 2005 to a new hard drive.  Since the problem is the hard drive and all the computer a new operating system should not be purchased.  If there is no way to move it is it possible Microsoft send a replacement free of charge, or at least OS with only shipping.  My computer came with it pre-installed, and I have not received the drive with the OS on it.  What can I do?  Thank you for your information.

  When you received your entry door, it came with a CD or operating system recovery disc. If you no longer have that (or has not made a recovery disc set a utility included), contact Gateway to buy a set of recovery disks. It is normally fairly cheap. Then install the new hard drive and booting with the recovery disk to restore your computer to the factory State. MS - MVP - Elephant Boy computers - don't panic!

• How do we install the operating system on a new hard drive?

  Hello

  I thought all I had to do was use my recovery disc supplied with my notebook, but while the laptop was working fine for a few days there is now an error message when I try to load windows, something along the lines of "image error, check the Setup disk.

  I did something wrong?
  Any advice would be greatly appreciated.

  Thank you

  Hey Buddy,

  Installation on the new HARD drive is very easy. All you need is Toshiba Recovery disk and you must boot from that disk to begin the installation. Everything is done automatically and factory settings are restored to the new HARD disk.

  It work?

• Where and how can I reinstall the external hard drive to the new HD to the computer?

  Original title: HD crashed.

  I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

  Hello!

  You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

  Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

  If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

• Satellite Pro P70 - Has: 2nd invisible HARD drive - how to initialize the 2nd HARD drive

  I have a P70 - A. Satellite Pro
  'Primary' hard disk failed, and has been replaced by the service centre.

  Now, only the main hard drive is shown and the Service Center said that I had to 'initialize' the second hard drive to make it visible. They assure me that the hard drive is there, just hidden.

  How can I make visible?
  How do I initialize it?

  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.

• How to add the new hard drive RAID 5 on

  I have Dell Powerdege 2900 server and I need to merge the new hard drive in a RAID 5

  Hi Sabry75

  If you have open Manage Server Administrator installed, you can do the merge from there. It's rebuild.

  You can refer to the guide to using OMSA below, look under the virtual disks of re-engineering/migration: -.

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Let us know how it goes.

• I upgraded my computer, the new operating system on a new hard drive. Want to get my favorites on Firefox off my old drive, but can't find the file.

  I upgraded my computer, adding a second hard disk for a new operating system and kept the old drive as a data disc. I assumed that I could install Firefox on the new disk and import my favorites from the old installation of Mozilla on the old disk. I can't find the files on the old drive with my favorites. They're still here, or when I reinstalled Firefox, I lost everything even if it was on another drive? I can't find the backup on the old disk files and want to restore my old favorites. Is it possible to do this?

  You must find your profile folder in the old drive, the way in which must be:

  1. First display the hidden files and folders:
     • http://Windows.Microsoft.com/en-us/Wi.../Show-hidden-files
  2. Then go to:
     • < old drive >: \AppData\Roaming\Mozilla\Firefox\Profiles \Users\ < username >
  3. Enter in your profile, and then enter the folder bookmarkbackups .
  4. Copy the latest file from json (backup of bookmarks)
  5. Then restore from them:
     • Restore backup bookmarks or move them to another computer
     • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-...

• How to install the new hard drive and windows key?

  Hello

  I have a aspire v5-121-c72g32nkk.
  I have just updated to Windows 10, don't panic, but I want to upgrade my HD drive to a SSD drive.

  You can find the steps to do this?
  Windows was preinstalled, how I reinstall on another drive?
  I have no serial key or whatever it is.
  I'm a bit lost, you have an idea?

  Best,

  There are several ways to do this, anyone have product keys, since

  If you want to do a clean install:

  Windows 7-8 - 8.1 keys are embeeded on your BIOS

  Windows 10 use a generic key during the upgrade, so just skip the steps questions about a product key and the first time you connect on the web, it will authenticate to.

  You must decide:

  (1) do a clean install of your operating system to factory

  (2) make a disk - image of the system image and reload

  (3) to do a clean install of windows 10

  option 2 is the fastest at the end, as you create a copy of your HARD drive and reload it to your PC.

  you need a bootable windows 10 (USB or DVD) media and little space on external HARD drive.