How to reinstall the usb drivers?

Similar Questions

• Clean install of windows 7 - How to install the USB drivers?

  I bought a Toshiba Satellite C50 loaded with windows 8, but want to go back to windows 7.

  I downloaded the drivers needed and have mounted the .exe files on a USB pen for installation.

  Before proceeding to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

  If so, how to install relevant drivers from the USB pen?

  Thank you, John

  > Before you proceed to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

  Of course, this might work.
  After Installing Win 7, you should be able to install the drivers for the USB flash memory key.

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Re: Satellite L300 - how to reinstall the SATA drivers?

  Hi all

  I have a L300 I downgraded to XP. It runs with the SATA controller in compatibility mode and are sent here a lot, it's slow.

  I read you need drivers intel for her and so I downloaded the and down them and had an error "your computer does not minimum requirements.

  Tried in both safe mode and got the same error.

  Now I could try to use nlite and I've used it before, but the file I have is an executable and not an inf and files related to a driver, so I don't know how to add it to nlite. I'd rather do not re - load again if possible.

  So the simple question is how I install the AHCI SATA drivers so I don't have to run in compatibility mode.

  Thank you

  Mick

  Hello

  I think that you should use the forum search. You will find the sufficient number of threads how to install SATA drivers

  In addition this s one interesting article step by step:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• update the usb drivers

  How update you the usb drivers

  Hello

  ·         What service pack is installed on the computer?

  ·         Are you referring to any specific USB device?

  To update these drivers, follow these steps:

  (a) click Start, run, type devmgmt.msc, and then click OK.

  (b) double-click the type of device you want to update.

  (c) double-click the specific device that you want to update.

  (d) click on the driver tab, then click on set to update driver.

  (e) follow the instructions in the Hardware Update Wizard.

  (f) repeat steps 2 to 5 for each USB device.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I reinstall the audio drivers for my motherboard d845egb2 intel

  I received a 2nd hand computer and had to wipe all of its information. and lost the ethernet drivers and audio. So how can I reinstall the audio drivers for my motherboard d845egb2 intel

  Hi samshepherd,

  To check if an updated audio driver is available for your sound card, you can use Microsoft Update to help you determine your current sound driver and if an update is available.

  You can also contact the sound driver hardware or the computer manufacturer for an updated audio driver.

  See the link below for more details:

  How to update a sound card driver in Windows Vista and Windows XP

  Additional reference on:

  How to troubleshoot sound problems in Windows XP

• How to load the SATA drivers during the installation of XP - Satellite L40-18 X?

  Hello

  I have Toshiba Satellite L40-18 X with Vista Home OS. Now, I want to install Windows XP, I know that I have to reinstall the SATA drivers, but I can't find USB-drive floppy-disk drive.

  I was wondering can I install these drivers of some other player, like a flash drive or external CD ROM

  Thanks in advance

  Hello!

  There are two options to load the SATA drivers.

  As you know to load from a floppy drive, but if you n t have one, this isn't a problem.

  Create your own Windows disk with nLite. nLite is a tool of suppression of configuration and Windows components before installation of your choice, but you can also integrate drivers, service packs, the settings and to this day.
  It s a very nice tool and its freeware.
  Here you can download and read how to create a disk:
  http://www.nliteos.com/

  Good bye

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Pavilion zd7058cl. Do not install the USB drivers.

  When I reinstalled my XP Home OS it didn't load the USB drivers. I use USB a lot and really need the drivers. Thanks to anyone who knows where I can get them.

  You may have an older version of XP Home. You must have the SP2 or higher for usb 2.0 support. Try to install all Microsoft Updates, including the SP2 and SP3 and see if that helps.

• I deleted pages by error, anyone know how to reinstall the pages? Thank you!

  I deleted pages by mistake with mackeeper, anyone know how to reinstall the pages? Thank you!

  First - get rid of MacKeeper - it will wreak havoc with your Mac. This is an absolute piece of garbageware. See this link for full instructions:

  How can I remove mackeeper to my macbook pro

  For re - download pages to your Mac, open the Mac App Store, and then click "buy". You should see that pages listed there with the button download beside him.

  Good luck

  GB

• Jetta or anyone any response on how to obtain the latest drivers

  Jetta or any person, any answer on how to obtain the latest drivers, etc..  Thank you

  As a rule, go to the website of the manufacturer (support section) and search your device. Make sure you get the drivers for your version of Windows (including whether 32 - or 64-Bit *).

  * To find out how this, look here: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If you need assistance with a particular device just driver post here the details above.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• How can I install usb drivers for win98 or win98se without cd player?

  I have an old laptop Dell Inspiron 3000 in my closet I have desided to fix so I have downgrated for win98 winme and I can't find the usb drivers?

  and I don't have a cd burner or a dvd burner! Please give me drivers win98 and win98se =)

  Hi TheTechKid607,

  Windows 98 is a Microsoft product. There is no support available for Windows 98.

  For more information, refer to this link: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

  Hope the helps of information.

• How to reinstall the file MSVC90.dll

  My computer cannot read the real player as it says im lack the file above. some can guide me on how to reinstall the file.

  Hi tonyuniformat

  
  You have Microsoft Visual C++ 2008 installed on the computer?

  
  Method 1:

  You can try to reinstall the program and check if that helps.

   

  Method 2:

  If the problem persists you can check if you install Microsoft visual C++ 2008 helps that solve you the problem. Refer to the below link to install the same.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  I hope this helps.

• I5-d001sx: could not find the usb drivers for win 7 32 bits for the model 15-d001sx

  Hello
  I have hp laptop 15-d001sx. My USB doesn't work not with win 7 someone can you please tell me from where I can download the usb drivers.

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/24503/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC