How to reinstall Win98 after formatting C on Sam 2180
Hello, I am working with Satellite 2180. I have a problem with reinstalling windows 98 after formatting C:
I have a boot disk with CD support for the A: drive. When I start it works well it also makes a ram on D: drive. He sees the CD to E: and the dir and the setup.exe, but does not start when I type setup or setup.exe. I also type Act E:\setup it won't work.
I understand that there is no driver CD in MS DOS. I have the original win 98 cd
Please help me. Sorry for my English. I'm Dutch
If you have an original win 98 CD it is possible to boot from the cd. You may need to enter the bios to change the boot CD-ROM device. You can also try to format the hard drive since a win 98 boot disk and then boot your computer with Win 98 in the drive. The installation program should start automatically.
I need your help to restore some important data which disappeared after formatting the hard drive.
I have not any backup that was my mistake.
Everyone's help is appreciated.
Thank you all.
I don t think you will be able to do.
Usually, data are lost after you have formatted the HARD drive.
Of course, there are some different applications that could help recover some data for example. Data Recovery Wizard, but it is not cheap software.
But I found this:
Maybe it helps. Good luck
I want to format my Sansa Clip + for NTFS so I can use transfer a large file (> 4 GB). Once I'm done, I'll reformat it to fat32. My question is how can I reinstall the Sansa software so I can still play music.
How can I reinstall a prepackaged vista on a compaq sr 5000 operating system after the expiry of the trial version of windows 7
See the following articles on Windows7 uninstall. They have to help you in this process.
KB971762 How to uninstall Windows 7
KB971760 How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder
KB971759 How to back up your data on a Windows computer
I hope this helps.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Once tired of these multiple Vista Home crashes that I decided to install Linux (OpenSuse). Although a capable OS, I need some windows software and want to restore Vista on this machine. I have the system restore partition, but when I try to run it, it gives me an error. Apparently Windows no longer recognizes the MBR as it has been recreated by GRUB.
I don't have a Windows Installer disk, just the installation of system restore (F11).
Is there a bootable utility I can get to delete the Linux partitions, recreate the C: drive * and * difficulty the MBR? After that, I think I can use the system restore.
Any advice greatly appreciated.
You are welcome.
Let us know how things work.
And here's where get you the latest drivers
See you soon.
My HP Pavilion m9080n HDD is a failure. I would like to do a clean install (but would also be OK with any method) to rebuild on a new hard drive.
* original title - how to replace a hard drive failed by a new hard drive and reinstalling Vista because my computer did not come with full support (just a recovery partition)? *
Contact HP and ask them to send you in recovery vista disc to reinstall the operating system back as it was when you bought it on the new drive
they do it for a nominal cost of $
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
I just formatted my computer and need to reinstall my Acrobat X Standard that I have purchasen in 2010. Where can I find the download link? My product is saved, and I have the serial number.
My iPhoto was not able to export a slide show and did not of course sharing photos by e-mail. I read a few posts on the same question and the answer was to remove it and reinstall it in the list to purchase the App.
So I put iPhoto to the trash and empty the trash, but it still shows on the list to purchase the App on iPhoto.
Am I suppose to clean more stuff? I read a few recipes and the preference of the animals but don't know where to find them, cannot locate via Spotlight.
Someone help please?
It was not necessary to empty the trash - I hope that you have a copy of backup application iPhoto somewhere?
If the app store shows Photos as installed on the purchases tab, reload the tab by entering the key combination ⌘R and if that is not enough, a search with Spotlight for iPhoto. He find other copies of iPhoto.app, perhaps on the backup drives connected or network?
A few reasons I had to format my laptop because of which I lost my windows genuine, but I still have the product key. So is it possible to reactivate authentic windows of this product key on the same computer laptop?
Right click on computer > properties at the bottom of page is activate windows now, it will fail the call number to the 1-800 number, request to follow.
My SSD has failed and I have installed a new drive. Acrobat is in the Adobe registered in 2014 online account, but I can't see any link to install the licensed software on the new drive in my laptop? The old drive is dead. Appreciate some guidance.
What version of Acrobat? What operating system?
Try to download from
Install and enter your serial number.
After having my original problem to create rescue disks resolved with your help (thanks again), I'm at the formatting of hard drives of 300. After that, I want to do a fresh install of Ubuntu.
But I must admit I'm rather nervous about all this.
So 2 questions:
1 has anyone done this before and how it worked?
2. I would be able to get the M300 back to the form using the reinstallation discs, AFTER formatting the HARD drive
Thanks in advance!
Usually the Vista Toshiba Recovery DVD should reinstall everything again. Simply said, it must affect the M300 return to the factory settings.
The use of the recovery DVDs is very simple.
You must boot from the recovery DVD and must follow the instructions on the screen!
But note; The recovery DVDs will format the entire HARD drive... as the partitions created, etc...
That s it.
How can I restore recovery d ' training on hp pavilion dv6-2155dx after format?
You can not restore
It was photographed on your hard drive by HP during the fabrication of your machine and cannot be replaced
Buy HP recovery disks instead
Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
I have a dell laptop l502 with a premium windows home instlled in hard drive 7. now I need to format the hard drive, but how can I keep my windows 7? is it possible to save or I loss my windows genuine?
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is available for the most popular brands
For Dell, press CTRL + F11 directly after switching on the device
This will allow that you reinstall Windows 7 while maintaining a true.
Make sure that you back up your data before reinstalling:
I desperately need HELP! I formatted my laptop Dell Inspiron N5110 and reinstall a copy of windows 7 after noticing several virus on my pc. But I doesn't not delete or format the Partition recovery. The recovery partition is intact. I now have to recover my pc to the factory of origin of windows settings , but I don't know if it's possible and how. I didn't know I could just use the Dell Datasafe from the beginning before formatting my pc (stupid I am). I handed a letter to the recovery partition (f) and know I can see all the files included in it. After searching for a while, some people suggesting to run the cmd following under 'Tools' dir (ED I can't find):
imagex /apply f:\dell\image\factory.wim 1 c:\
Can someone help me please? I really need help with that! Can someone give me instructions what to do?
Don't need you to worry, by making use of the formatted partition recovery software you can easily recover files after formatting the hard disk partition. Few days back, I spent the same similar problem where in lost some important files due to the installation of the OS. Then I tried this recovery software which really helped me to recover files after the installation of the operating system. So, you can download this software by following the below mentioned links.
How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?
(I do not installed new HARD drive yet, but I intend)
You have created the Toshiba Recovery disk? Perfect!
After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.
> How to access password protected data after relocation?
It would be interesting to know what data you mean exactly.
Before you reinstall Windows, you must back up all data on a disk for example external HARD.
Maybe you are looking for
I had this problem with Firefox 4.x - and I just upgraded to FF5, but the problem persists. What happens is, when I surfed on more than one page (or site) on a tab, then want to go back, I find that my back button history has often several versions o
had a crash re - installed windows XP Pro, then I tried to download all updates and got this error > error number: 0 x 80240036 The website has encountered a problem and cannot display the page you are trying to view. The options provided below may h
Help! I have a computer dell laptop latitude d610. It came with dvd - rom. I bought a dvd on ebay writer who was supposed to be plug-and-play. It plays CDs and DVDs, but when I burn a cd or dvd, it burns fine and they will play in other PC, but will
I turned my animation of clay at 5 fps in .mswmm. When I publish the movie on that computer it playsback at 25 fps. This transforms a 3 min. video in a 20-minute video that I can't upload to Youtube because it is too long. Can anyone help? I tried to
I want to add a second hard drive to a HP Pavilion A1700n Pc desktop to a new HP Pavilion P6-2100 Desktop Pc, so I can transfer files.