How to remove an application without him jumping all the time when remove you

Similar Questions

• with these changes, I can only print a page of print preview ability has been removed I use it all the time when you want to print something on a Web site

  When I was on a website and I tried to print a page, it allows to be a tab that says "FIREFOX" in the upper left corner of my screen, I could click on that tab and I had several options, one was "print" and "print preview". All the time, I use the Preview button before printing to see how the page would look like when I was feeling and how many pages there are. I could then choose to print all or part of an article and adjust it to what I wanted to print. I don't have this tab in the upper right corner. A tab for "open menu" is now in the upper right corner, however, in this menu is only a button 'print '. There is no option for "print preview" and so I can't address that I want to print. I could also adjust margins, etc. of a tab from the view, I can not find too. I really hope there are always options and how I find, where are they located?

  Print this button in Firefox 29 opens in print preview mode first.

• How can I find applications without being connected to the interest?

  Do not know if I put this in the right section... But Xcel is not on my screen on the laptop and my internet computer is down (offline). Then I tried searching and cannot find even without being connected... WTF? OK, well how oh Earth find Xcel? I have no existing file that I can just go in and open and even to connect my windows phone, it only detects the photos. So now, I have two questions.

  1. How can I search for apps without being online?

  2. How can I get the computer to detect the Xcel files (as well as all the other files in addition to pictures on my phone)?

  You must not be connected to anything.  Simply go to the screen start and press 'ex' on your keyboard, as you enter the letters, the entire screen should filter to find the app you want (you don't have to type the whole word excel, but you can).  When you see Excel, simply right-click and choose "PIN to start" or "pin to taskbar" to put a shortcut to where you want.

• Cursor jumps all the time. Help!

  On my VAIO laptop cursor jumps around while I'm typing.  I type too hard?  This can be solved?  Thanks for your help.

  Hi, Betsy,

  With laptops, it usually occurs because you are accidentally brush your hand against the touchpad when typing.

• How I answered several emails and then send all the answers when I'm done?

  It is tedious to have to wait for each reply to 'go' after pressing the Send button. is it possible to compose a series of responses, "" store them somewhere and then press a button 'Send all' when I'm done?

  Compose a message and then file/send more later (Ctrl-Shift-Enter) to store it in the Outbox. Repeat with other messages. Then file/send unsent Messages to send the contents of the Outbox.

• How to stop security WARNING pop up all the time to come

  original title: question of security warning

  How to stop security alert pop up coming all the time when you view the web site Clikpic. Whenever I select an image or a page, he asks me to select Yes or no, if I want to see the next page.

  Hi EDeeS,

  The settings Windows 7 UAC (User Account Control) has a slider to change your level of comfort with the notifications. You can choose one of the following four options:

  ·         Always notify me and wait for my reply. UAC (User Account Control) prompt is displayed on the Office secure when a program is trying to install the software or when you or a program tries to change the settings of Windows. If you do not click Yes, after 30 seconds, the UAC (User Account Control) prompt automatically denies the request.

  ·         Always inform me. The UAC (User Account Control) prompt will appear on the desktop when a program tries to install the software or if you or a program changes Windows settings. If you do not click Yes, after 30 seconds the UAC prompt automatically denies the request.

  ·         Notify me only when programs try to make changes to my computer. You are notified only when a program tries to make changes to your computer, including changes to Windows settings.

  ·         Never notify me. This selection disables UAC (User Account Control).

  http://TechNet.Microsoft.com/en-us/library/cc709691 (WS.10) .aspx #BKMK_S2

  Note: You must restart your computer when you turn on or turn off UAC (User Account Control). Change levels of notification does not require that you restart your computer.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  When should I programs to make changes to my computer?

  http://Windows.Microsoft.com/en-za/Windows7/when-should-I-allow-programs-to-make-changes-to-my-computer

• Safari crashes all the time without report. Now, nothing happens

  Dear people,

  I'm on 10.11.2. Latest version of the software. MacBook Pro mid-late 2009. Until today, everything worked like a charm.

  And then Safari crashed all of a sudden all the time when I tried to open another tab (~ 5 have been opened)

  That's what I did:

  -J' all caches emptied

  -delete all cookies

  -remove all history

  -J' disabled all extensions

  -J' deleted Cache.db

  -J' tried Safari in another account - same problems

  -J' deleted all preferences

  -J' reinstalled Mac OS X

  No luck.

  And I get an error report or whatever it is. It keeps crashing.

  I need help please!

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  You don't say what kind of discs to have.

  Here is the info on how to reinstall using a Vista DVD from Microsoft.

  For all other Vista reinstall information, contact the manufacturer of your computer.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How do remove you Essbase of HSS 11.1.1.3?

  Hello
  How do remove you Essbase of HSS 11.1.1.3?
  We have 11.1.1.3 Essbase security outsourced to HSS of planning. However, when we run CSSexport.bat, we do not export Essbase security. (CSSexport not exported any warranty).
  
  CssExport also intervenes on this error
  Export: To try to recover HSS for ASOsamp app id
  
  Export: Id app recovered from HSS for ASOsamp asiss.com_1.ESBAPP:ASOsamp
  
  Export: Attempt to load the configuration data for app id iss.com_1.ESBAPP:ASOsamp
  
  Export: Cannot load the configuration data for app iss.com_1.ESBAPP:ASOsamp
  
  Export: Root cause: there is no such thing as 30:6519:Target application.
  
  Export: Silently ignore the last error
  
  Surprisingly, he does not complain about our planning of Essbase applications - as if they are not recognized.
  
  I thought login in HSS and remove planning Essbase applications - which I hope it will de-register Essbase security with the HShared Services.
  Is this a good idea?
  I can try to save planning Essbase HSS applications after that.
  I backed up all security planning and the security of HSS.
  
  In addition, our Cssimport works very well on the production server. This is our TEST server that we are experiencing the problems mentioned above.
  Thanks in advance.

  Hello

  You can remove the application essbase HSS then in the EE right click again the application and sign.
  If the question can be more serious that simply record the applications again, you will need to return to native essbase then outsource shared services but try the first method first and see how it goes.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  You must delete and re-download this request.

  (140006)

• What is an application error, wmiprvse.exe? It keeps popping up all the time and its quite annoyinng. Can I get rid of him?

  What is an application error, wmiprvse.exe? It keeps popping up all the time and its pretty boring. Can I get rid of him?

  What this has to do with Windows Media?

  Rwillet,

  Thank you for visiting the Microsoft answers community.

  The wmiprvse.exe file is otherwise known as Windows Management Instrumentation.

  In research, I found a few articles that might help you:

  Windows wmiprvse.exe related errors

  Wmiprvse - wmiprvse.exe

  You can run your scan virus and if necessary, perform a System Restore to a point prior to the error occurring.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I use pim/message lib in an application without a head at this time I have error

  Hi all

  Today, I try to compile the app for the incoming and outgoing sms watch but fatch some problem.

  It works very well in waterfall app but when I try to put implementing in an application without a head at this time, I get the error.

  I joined code of Cascade and Headless request please check and let me know what I need to change.

  Note :-work fine waterfall Soft code that works when the service error part it does not work.

  Hi Doturner,

  Thanks for the reply.

  I'll try to understand my problem as soon as possible, but some time I need to complete the project on time so when you do that, I have attached code according to the referance.

  Why I joined 2 code?

  -J' developed an application without head and this problem occur after I use the SMS api works pretty well. So I put 2 code code 1 and 2 work without labour code.

  Structure of headless service created by BlackBerry IDE and file name of the service being built. So I m confused and I have no idea is the headless application error or my mistake,

  What ever thank you once again, I'll check and if I need help and then I take the new query

• You want to use applications on a computer in the library when you travel. I can access without having to download it to their computer?

  You want to use applications on a computer in the library when I travel out of town. Is this possible without download on computer?

  It is unlikely.  You will need to download and install applications on the machine, and it is doubtful that you might infer from this ability.

• How can I put the binoculars icon in my toolbar.  I want to show him all the time

  How can I put the twins in my toolbar icon if it will show all the time next to the icon of my email

  Right click on the toolbar, go to Edition, check the advanced search.

• HP 15-f337 laptop: is it OK to leave it plugged in all the time or do I have to remove battery?

  I use my laptop almost exclusively to my office with plugged into the wall. Should I unplug it when it gets to full load or do I remove the battery and stay connected or what?

  I have read different answers and want only the best for my laptop. I run Photoshop and Lightroom, in addition to other programs so it gets a good wookout of every day.

  Any advice would be helpful.

  Also, Im getting another EXACT memory stick (corresponds to the sticker with all the numbers, etc.), do I have to just jump in, or is there something else I need to do? Currently have 4 GB and adding another stick of 4 GB.

  Thanks again!

  Hello:

  This is a HP support document that provides useful information on how to maximize the battery life...

  It answers your question if it is OK to leave the charger plugged all the time... No, it's not.

  http://support.HP.com/us-en/document/c00596784