How to remove intermediate elements of an array

Similar Questions

• How to remove the point of my array

  Hi, I have a table with the elements. now, I want to remove all elements in the array. How can it be possible?

  It depends on what you mean by compensation. The delete operator sets an array to undefined element, the length of the array remains unchanged.

  for (var i: int = 0; i<=  yourarray.length();="">

  {

  delete [i] yourArray;

  }

• 2 How to remove an element from the tree and the database block tree?

  Hello
  
  2 How to remove an element from the tree and the database block tree?
  
  Kind regards
  
  Abdetu...

  The problem is caused by not sending forms is not a VALIDATION of the database because he thinks that there is no changes to save.

  Forms does know that changes to the data block, he does not know the changes made by the PLSQL INSERT, UPDATE, DELETE calls and procedure.

  Try to remove the line to block, rather than using a DELETION like that...

  go_block ('INSP_EQUIPMENT_TYPE');if form_success then   do_key ('DELETE_RECORD');end if;
  
  
  

  If you wish to continue using your original DELETE instead of my change above code, you can use different techniques to force forms to issue the COMMIT to the database, including this one...

          DELETE ...        FORMS_DDL ('COMMIT');
  

  Be careful... This will be the VALIDATION of the database, but the changes to the data block will not be sent to the database!

  I posted a few other ways to issue a VALIDATION of forms here
  www.seeristic.com/Forum_Posts/Forms_COMMIT.txt

• How to add corresponding elements of two arrays in a continuous acquisition?

  Hi all

  I am writing a program (in version 9.0 of labview) to acquire the signal of a fast set. I use the acquisition rate of 1.25 Ms with an external trigger. Now what I need, is to add the "n" data these acqisitions and then further process.  E.g. If I signal to 200µs acqiring can total number of data points with the acquisition of 1.25Ms rate will be 250. I'll get a table 1 d of 250 data points whenever I run my acquisition.

  Let's say Array 1of acquisition number 1, 0.1, 0.3, 0.5, 0.6,... up to a total of 250 data points

  Table 2 of the acquisition by number 2, 0.4, 0.5, 0.8, 0.4,... up to a total of 250 data points

  ----------------------------------------------------------------------------------

  Added table should be 0.5, 0.8, 1.0, 1.3... .route to a total of 250 data points

  -----------------------------------------------------------------------------------

  To do this, I need first to save the table of acqisition number 1, then run the No. 2 acquisition and add points of data corresponding to the saved table. This should continue at a nuber defined by the user to purchase say 10, 20 or 50... I don't know how to do it. Can someone help me with this problem?

  Thank you very much in advance

  Kind regards

  Champion

  I guess that time avarages and acquisition will not change during the measurement, so keep a cela outside loops. If you know your settings for made her make it constant.

  you create task (outside the loop) and a narrow at the end.

  Avoid the dashboard generation where possible. With no.. AV., and no. acq.points declared, the size of the arrays is fixed and you can (re) use a single Bay and replace the elements in the array.

  No need to collect all the data and avarage them after the rally. Just add

  I add a suggestion

• How to remove the element in a scene without deleting the animation of this element

  Hello

  How can I remove an element in a scene (for example to 0:30) without deleting the animation of this element to (for example at 0:20)?

  I don't really know what to do.

  Benno

  Hello

  I have a little trouble to understand what you want. If you want that element disappears in your animation, you can switch the display in two keyframes on the right property before scoring 30 seconds. See below:

  

  You simply make a keyframe in the position "On" in the display property in the properties panel, then move on to an image and set a new keyframe on 'Off '. This will make invisible if you do not have to remove the animation. : )

  I hope this helps!

• How to add an element to an array, and then be able to remove more precisely

  So, I have a list of numbers. The user can then add numbers to this list. I have a button that allows the user to remove any number of their choice by typing this number in a text box. For some reason the numbers that the user adds to the list will not disappear once selected, while the original numbers go without problem.

  The name of the table itself is mesEntiers and the name of the TextBox: IntegersIn_txt

  Here is the code:

  function supprimer(event:MouseEvent):void

  {

  var indiceChiffre:int;

  indiceChiffre = (mesEntiers.indexOf (IntegersIn_txt.text));

  The indexOf method returns the index of an element or - 1 if not found.

  trace ("testBtn")

  If (indiceChiffre! = - 1).

  {

  for (var i = indiceChiffre; i < mesEntiers.length; i ++)

  {

  mesEntiers [i] = mesEntiers [i + 1];

  trace ("test")

  }

  mesEntiers.pop ();

  }

  } / / End of function remove.

  Two things I can think (I ran a small test)...

  (1) make sure your textfield is a single line, multi-line not... multi-line end up with additional stuff in them that you can't see.

  (2) convert the text to a number unless the table is now strings... indiceChiffre = (mesEntiers.indexOf (Number (IntegersIn_txt.text)));

• How to use the elements in the array

  Hi, I am trying to automate a questionnaire using table.

  In the compositionReady for the scene

  SYM. Actual = 0;

  sym.arr = ['Hi', 'Love', 'You'] / / this is my picture of the issue.

  sym.checkArr = function() { / / this function I use to check the issue table whis I'll use.}

  sym. Question = arr [real];      I want to use the value 'Hi' and then increase my 'real' var and then use the value 'Love '.

  }

  In my symbol calendar, I use a trigger in the trigger that I use

  SYM. Stop();

  sym.quest = sym.getComposition () .getStage (). Question; / / I get the value of the Question;

  Sym. $("Ask") .html (quest);                                                        "Ask" is an empty textfield;

  sym.getComposition () .getStage (invested) ++;                    Increase 'real' for the nex time.

  But the code does not work, I think that the problem is the way I use the array index.

  Help, please!

  Thank you =)

  Hello

  chino_10 wrote:

  at the outbreak of timeline you why did you use a local variable?

  It is advisable to use local variables when possible. The quest variable apply only to this trigger, and it will not be postponed to another trigger in the same timeline. So when you use a trigger to set the HTML for a text element in the same timeline, I find cleaner to assign a new value of a local variable HTML.

  chino_10 wrote:

  and if you call the 'real' global variable of Manager compositionReady of why didn' there you call him with all the way like ' sym.getComposition () .getStage (invested) ++; '?

  I think I have didn't express it as clearly as I could have. When you declare sym.actual in compositionReady, you actually declared a variable whose scope is the symbol of the main stage - it is not a global variable. To declare a global variable (which is not always recommended), your code in compositionReady would be:

  real = 0;

  This real variable would now be accessible from any element/symbol in the composition simply by assigning a value to the membership. You can see how quickly this could be embarrassing.

  So back to the scope of variables: If you declare a symbol variable using sym.varName, any element in the same scope may call using sym.varName. If your main scenario triggers can call without using the full address of sym.getComposition () .getStage () invested ++. Instead, you can simply use ++ sym.actual. Less code and easier to read. But if you call from another symbol (outside), you need to use the full, addressing the address actually the variable, i.e., sym.getComposition () .getStage () invested ++.

  HTH,

  Joe

• How to remove the elements hidden in PDF format

  Hello

  We use Acrobat 11 on Win7 Pro machine. We try to remove the hidden elements of a PDF file, we created.

  Using the image/text editing control we usually change the view to page view mode 2 can then select hidden items and delete them. We do not see the items in the display of the 2 page, but clicking and dragging in the "empty space" in the document, choose which then allows us to manipulate them. These elements are not visible when you view the PDF file normally.

  This time, we have a PDF file where we cannot select an image. We know that it is there, because when you try to trim the visible content, the hidden element is shown:

  

  We want to remove the bars of color at the bottom of the page. Can anyone help us with this, please?

  Thank you!

  I usually use the content pane for this - arrow down through content items and delete the ones I don't want. Not sure that this is the most effective way, just something that I found that works for me. I always work with a copy of the PDF file in case something goes wrong.

  a 'C' student

• How to remove an element in 'Recent locations' in stock 'my computer '.

  I am wanting to remove a redundancy point in the right column, but do not know how to do this.  Can you please specify?

  Glad to hear it, Brian!

• How to remix the elements of an array

  Hello

  My question is I have a table a = [0,1,2,3], and I want to get a table b with elements of a distributed randomly. I tired the below code but it does not work

  var a: Array = new Array();

  a = [0,1,2,3,4];

  var b:Array = new Array();

  4 = b.Length;

  b [0] = math. Floor (Math.Random () * 4);

  for (var i: int = 1; i < b.length; i ++) {}

  b [i] = math. Floor (Math.Random () * 4);

  for (var j: int = 0; j < b.lenght; j ++) {}

  {while(b[i]==b[j])}

  b [i] = math. Floor (Math.Random () * 4);

  }

  }

  }

  The code does not work. Smbd can help please.

  Thnx...

  Something like this should work:

  var Tester: Array = new Array (1,2,3,4).

  var randomArray:Array = new Array();

  function randomizeArray(array:Array,newArray:Array):Array

  {

  While (array.length > 0)

  {

  var obj:Array = array.splice (Math.floor (Math.random () * array.length), 1);

  newArray.push(obj[0]);

  }

  return newArray;

  }

  randomizeArray (test, randomArray);

  trace (randomArray);

• How to order the elements of an array?

  I m trying to elements of order in a table. When the dates come from dinamic text it s no problem, bad when come input text dates are treated as strings and it s imposible to order correctly, because 15 is considered to be less than 3. In both cases I can operate this date as numbers. ¿How is possible to order that this date of text entry, as the numbers of Pentecost?

  Thank´s

  textfields values are strings (even if it looks like a number to you).  There are several ways to handle this, and we need to get this string as a number before you add it to your table:

  My.push (Number (yourtextfield. (Text));

• How to remove an element from the drop-down list (located between the star to bookmark and Reload arrow)?

  When I click on the down arrow, located between the star and the arrow of Reload, I get a list of what appears to be recently visited sites. I want to remove one or more of these sites that I don't want in the list. I've tried right-clicking on the sites I want to delete but when I do I not give me an option 'remove '. Help, please. Thanx

  Glad to be of assistance. All these lists work the same way. And don't forget,
  There is only one stupid question. And this question is;
  
  
  The one you don't ask.
  
  Nice day.

• How to select certain elements of an array?

  Hi all

  I wander if there is can someone help me solve this problem...

  Let's say I have 100,000 items {0,1,2... 99999} and they are distiributed in order unsequence. Then, we choose only the numbers that are senior to 80,000. How can I do? Thanks in advance

  Concerning

  quick way is use sort d 1 table look more close value more than 80 000 and deletion of table

  But if the position of your value is important way point

• How to remove several elements of both Games Explorer?

  I accidentally pasted a lot of Games Explorer games TWICE and now I have many copies of it inside the Explorer games (Windows 7). I want to delete all the games in doubles at the time, but I can't find a way to do except remove them one by one. What is the best solution for this without uninstalling the games?

  Hi Doomsland,
  I can't recommend a specific piece of software, but I will say that I do my personal decisions of the advice given on this site.

  Microsoft doesn't recommend or suggest any third-party software. Please use your favorite search engine to look for third-party software selectively erase some files.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  hope this helps,
  B Eddie

• How to remove the elements in the "Deleted items" folder using Microsoft Windows Mail?

  This used to work, but I was not able to remove items from the deleted items folder and it takes a lot of space.  I used to be able to do it and it automatically deletes the items when I closed Windows Mail (it is always set up to do, incidentally, does not yet), but now it does not work. I've tried everything. I used the link at the top of the page coming down and clicked on "Empty Deleted Items Folder", but it does not work.

  I tried to download Windows Live Mail and it won't work on my computer.

  Any help would be appreciated.

  Thank you!

  Maybe could turn the setting and then turn again. Sometimes it works, but I wouldn't be surprised if she did not help, or if you have already tried.

  Take note of the following:

  1. I've never used only 8 years old, Windows Mail
  2. Windows Mail is not supported.

  The deleted items folder has a clean button on it? This can empty it completely. Another thing to consider is that your e-mail service can remove items deleted periodically. However, as you say, it takes place, so you can delete them manually.

  Alternatively, you can consider changing the e-mail programs. You said that Windows Live Mail did not work. You can try an older version, because I don't think not 2012 works on Vista (based on absolutely no evidence, by the way) another option to consider is Mozilla Thunderbird. If you have Microsoft Office and it includes Outlook, certainly use it.

  That's the only advice I have. If this does not help, I don't have anything else for you.