How to remove the name?

Similar Questions

• How to remove the names on my list of bbc

  When I send emails and click on my list of BBC I have the name and address that appears twice, Hoe delete these additional email addresses?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

• How to remove the name of the column in the select clause

  Hello guys,.
  
  I want to just delete a column name in the select clause. Because I don't want to write all the names of columns. I hope I am.
  
  In other words, I want the following.
  

  Select   * - unwanted_column  from table;
  
  instead of this 
  
  Select col1, col2, col3, col4, ........ col 10000 from table;

  Hello

  There is nothing in SQL, which means "all columns * except *...» ». As others have said, the only way to achieve these results in SQL is to list all the columns you want.

  Your front end may have a feature that allows you to hide a specific column. For example, in SQL * Plus, you can use COLUMN... NOPRINT , like this:

  COLUMN      dname     NOPRINT
  
  SELECT       *
  FROM       scott.dept
  ORDER BY  dname
  ;
  

  Output:

  `   DEPTNO LOC
  ---------- -------------
          10 NEW YORK
          40 BOSTON
          20 DALLAS
          30 CHICAGO
  

  There is a column called dname in the scott.dept table; the query above uses actually. But, because of the order of the COLUMN, SQL * Plus will not display this column.

  Published by: Frank Kulash on February 26, 2013 10:10
  Example of scott.dept has changed.

• How to remove the names of the characters in the drop down menu

  I wrote off the coast of dialogue from the screen. Normally, I'd write FRED (O.S.), but when I did this, history treats as a new character - points in the general plan.  To try to remedy this, I have now four different instances of the character FRED that appear in the drop-down list of character. How can I do those I want to go?  How to indicate that a character is off the screen without creating a new character?

  Hello

  There are two ways to get rid of the extra entry-

  (1) use the lists of characters as then the drop-down list is populated in the list only. (Lists are available for paying customers only).

  (2) make sure that all occurrences of this additional entry in your script are removed, then save and reopen your document. Entries which are not used in your script are deleted in the drop down menu.

  Please try it and let me know if it works for you. Send in the stdoc (file-> save to disk) of your document to DL-AdobeStory-supportadobecom so that I can have a look.

  Thank you

  Rashi

• How to remove the name of the HTML to display in the address bar

  Hello!

  Wen, I visit the pages of a site made with muse, I see it in the browser address field

  cinomiller.com/index.html

  cinomiller.com/CV.html

  cinomiller.com/contact.html

  (and so on)

  I'd rather just

  cinomiller.com

  cinomiller.com/CV

  cinomiller.com/contact

  (and so on)

  How do we?

  Thank you!

  Hello

  I had the same problem and fixed it by adding this in the file .htaccess on my site.

  RewriteEngine on

  RewriteCond %{REQUEST_FILENAME}! d

  RewriteCond %{REQUEST_fileNAME}\.html-f

  RewriteRule ^(.*) $ $1.html

  You can get your Web host to do this for you if you are not sure of what you are doing.

  Good luck.

• How to remove the names of columns in SQL-report

  What I want is only data, without no column name.
  
  COLUMN LDATE
  SELECT SYSDATE LDATE
  FROM DUAL;
  
  LDATE
  --------
  07.11.11
  
  This example does not work. There are still LDATE above column. Any idea?

  It's all in the SQL * more manual...

  SQL> set heading off
  SQL> select * from emp;
  
        7369 SMITH      CLERK           7902 17-DEC-1980 00:00:00        800                    20
        7499 ALLEN      SALESMAN        7698 20-FEB-1981 00:00:00       1600        300         30
        7521 WARD       SALESMAN        7698 22-FEB-1981 00:00:00       1250        500         30
        7566 JONES      MANAGER         7839 02-APR-1981 00:00:00       2975                    20
        7654 MARTIN     SALESMAN        7698 28-SEP-1981 00:00:00       1250       1400         30
        7698 BLAKE      MANAGER         7839 01-MAY-1981 00:00:00       2850                    30
        7782 CLARK      MANAGER         7839 09-JUN-1981 00:00:00       2450                    10
        7788 SCOTT      ANALYST         7566 19-APR-1987 00:00:00       3000                    20
        7839 KING       PRESIDENT            17-NOV-1981 00:00:00       5000                    10
        7844 TURNER     SALESMAN        7698 08-SEP-1981 00:00:00       1500          0         30
        7876 ADAMS      CLERK           7788 23-MAY-1987 00:00:00       1100                    20
        7900 JAMES      CLERK           7698 03-DEC-1981 00:00:00        950                    30
        7902 FORD       ANALYST         7566 03-DEC-1981 00:00:00       3000                    20
        7934 MILLER     CLERK           7782 23-JAN-1982 00:00:00       1300                    10
  
  14 rows selected.
  

• How to remove the author's name and/or date of blogsite summary

  Hello

  Can someone help me please find where and how to withdraw the name of the author of the summary blogsite?

  I don't want any author's name listed, just the title linked blog and the date of publication.

  Or, is it possible to have the related title, with 50 words of the displayed article, but no name of author or creation date?

  I thank very you much in advance!

  I figured out how to remove the CSS author (.blogsitesumary duration-date {display: none}, but any attempt to change via CSS does not work.)

  For example, I can't create more space between the title and the date, or list items.

  Also, I would still add the first words of the post.

• any ideas on how to remove the software malicious zebrouss?

  any ideas on how to remove the software malicious zebrouss?

  This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Save all data first.

  Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

  If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

  If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• I want to know how to remove the back cover of my HP Pavilion Sleekbook 15 to install the new memory?

  I want to know how to remove the back cover of my HP product name: HP Pavilion Sleekbook 15 to install the new memory?  All site shows HP Web is how remove caches memory.  Unfortunately, with the newer models like mine, the whole back cover needs to be removed.  I have tried in vain to remove it, but so far all that I managed to do is scratch my cover.  If anyone can help?

  Dear David

  It's a very good idea, it would also be a good excuse to use my new phone for this.  So I'll say thanks again for the good advice.  Have a great weekend you Mr.  As I said earlier, you're a star...

  Yours Sincerely

  Alan

• How to remove the virus boostspeed.exe

  How to remove the virus boostspeed.exe

  Hi Laurence,.

  As far as I KNOW, you're talking about Auslogics Bootspeed, and it is a program (even if some consider how he acts and what he does to be very similar to how the system will react as if he was infected).  For technical support, see: http://www.auslogics.com/en/support/.

  If it's this product, there seems to be any special product online removal process (but perhaps custom support can help). If it isn't this product or there is nothing like it on your system, then why do you assume that it is a virus - are guessing you or some AV programs, told you that (and if so, which) and how locate you the file name as being the problem?  What is the full path to the file (for example, C:\Program Auslogics... or other)?    What security software you have installed (all names and the exact version of each)?  What version of Windows are you using?  Indeed, please see http://support.microsoft.com/kb/555375 for ideas on other information that will help us.  The more we know, the better we can help and the more focused we can make recommendations.

  I would try the following: start by creating a system restore point, and then back up the registry as well (just to be on the safe side).

  Download the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html and use it in advanced mode to completely remove Auslogics Bootspeed.  If it does not work because it says it is running (which is possible if there is probably not), then start safe mode and try again to remove use Revo in Mode safe.  The chances of success are much higher now that it is not likely to be running in Mode safe.

  I hope this helps.  Please get back to us in all cases, and if it haunts you again, please answer these questions as well as what happened when you tried to remove it as suggested.  On this basis, we will have a better idea if we treat just a difficult program to remove or legitimate an infection of any (or possibly both) and take the necessary measures from there - but we need to learn more and to see if the simple answer works (or why it failed).  We desperately need your help here (provision of information) to be able to help (with recommendations and options and courses of action - or more questions).

  Thanks and good luck!

  Kosh

• kb310441 microsoft fixed it does not remove the old username of the process after removing the name of the pc.

  Microsoft fixed that it does not remove the name process after removing the name of the pc. How to make an old username of the process?

  Fix, he changed the name and organization... just not their process attached like taskmanager, explorer.exe, iexplore.exe, wuauclt.exe, and much more.

  Thank you

  Charlie

  Hi charlezim,

  Target article does not username, but the information stored on the computer.

  If you want to change user names, you must create a new user account.

  How to create and configure user accounts in Windows XP

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• How to remove the trash-1000

  How to remove the Trash-1000 folder in external HARD disk? There is also a folder "System Volume Information" how to remove it without making this player?

  Hello

  Thank you for contacting Microsoft Community.
  Of the System Volume Information folder cannot be deleted. It is a system folder and user operations cannot be performed on him (as the name change, deletion, movement, access/change properties).
  You can delete the folder Trash-1000. It is created if the player is connected to a Linux system. It's where the deleted files/folders, so SHIFT + DELETE are stored is not used or completely deleted from the Recycle Bin. The 1000 is the UDI of the user account that created the file.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to remove the upgrade Windows 7 Professional of D:-drive?

  I bought Windows 7 Professional Upgrade from Windows Vista Home Basic. HUGE MISTAKE! On the Microsoft Store is a nightmare. Finally, I just received a refund. Now, how do the Windows 7 on my D drive where is where idiots to the Microsoft sortore had me download in the first place. now I have vista on drive c and one broke * windows 7 on drive d. HELP, apparently, not a microsoft support t know how?

  If the Visa is still functions (you can load a running Vista), then install EasyBCD and follow the instuctions for EasyBCD listed below. When you are finished with the removal of Windows 7 in the boot (according to instructions) menu, then you can reformat the D: partition, which is where you said Windows 7 was installed.

  ================================================

  EasyBCD - how to remove the invalid entry:
  http://NeoSmart.NET/DL.php?id=1

  When you run EasyBCD, you will see the following great tabs/buttons on the left.

  (1) the display settings: displays the number of entries (bootable version valid and is no longer valid to Windows). The one marked 'default' in the version of Windows that starts if you sit and wait 30 seconds without making a selection using the keyboard. The entrance of remaining are classified by 'Name' (unless renamed all entires will call Windows 7). Drive letter represents the partition that version. If everything that you installed multiple copies of Windows 7 and Vista the path "Bootloader" will always be the same.

  (2) menu of Boot edit: four options 'Up', 'Down', 'Rename' (is very convenient if you want to see a significant name when you first start (I have 5 versions of Windows on one of my test systems, so I reamed the plain jane "Windows 7" "Windows 7 Pro 64-bit" and "Windows 7 Home Premium 32 - Bt, etc." ").)
   
  The last option is "Delete", click on the entry of is no longer valid (for highlight), and click 'delete '.

  You will also see a check mark in the "default" (when 30 timeout expires) version of Windows (vista in your case), the computer will start to place a check mark to one you want to keep.

  Located at the bottom of 'edit Boot Menu' page is the time-out value, if you want automatically to your only remaining version of Windows just place a check mark in the box "Skip boot menu."

  When your done with your changes, be sure to 'Save Settings'.

  J W Stuart: http://www.pagestart.com