How to remove the other yellow section in stock

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• How to remove the other program the Virus Protection Windows Security Center colume antivirus?

  My PC run in Windows XP Home Edition. After you remove COMODO antivirus program, I find the untapped in Protection Virus Windows Security Centre colume COMODO antivirus program.

  How to remove the Virus Protection Windows Security Center colume COMODO antivirus program? Need help & solution.

  Have a good time.

  Hello

  * Go to start > run and type: wbemtest > press enter
  * There, click on connect
  * In the field at the top, where it says "root\default", type root\SecurityCenter instead, and then click the button to connect.
  * At the bottom, click on the button "request... ".
  * In the query box, type: select * from AntivirusProduct and click on apply.
  * In there, select the entry with the guid {043803A3-4F86-4ef6-AFC5-F6E02A79969B} and click on remove below. Then close this window.
  * In the query box, type: select * from FirewallProduct and click on apply.
  * In there, select the entry with the guid {043803A3-4F86-4ef6-AFC5-F6E02A79969B} and click on remove below.

  This applies only to when you had installed Comodo. For other Antivirus and firewall, it will be a different guid.

  I hope this helps.

• How to remove the calendar program in the e-mail section because I hate and that everything he did to the e-mail page

  all this happened on my email page yesterday and I clicked it, but I don't like it. and then all of a sudden Besides my collected email addresses and my personal address book now there's a "address book all the" I don't like it as it is constantly changing for it and I don't want that. I want my program to return to how it was three or four days ago, when I didn't have this program and the additional topics, etc.

  How to remove the calendar program

  Open the Add-ons - Extensions Manager, search for 'Flash' and press the 'delete '.

• How to remove the spaces of a template header

  I'm trying to work myself through the understanding of the html codes using a model dreamweaver and creating a page for my company. I used dreamweaver before CC, but I try to understand the new changes.

  I came across a problem with the fact that I'm hoping to get help.

  I tried to replace a logo placeholder on the template with my own logo. I seem to have a little space to white at the bottom of the logo when I see mode live view or a browser. How can I get rid of him. I've tried combinations of 0 margins and changing the filling, but it seems I'm just whistling in the dark. Here is the code:

  The CSS associated with this page is here:

  !-[CodeBlockStart:dec9d6ff-17ba-4058-9575-0b88476c1251]-->@charset "UTF-8"; body {make: 100% / 1.4 Verdana, Arial, Helvetica, without serif;}]   background-color: # 42413.   margin: 0;   padding: 0;   Color: #000; } / * ~ ~ Tag of the element selectors / ~ ~ * / ul, ol, dl {/ * because of variations between the browsers, it's best practices to zero padding and the margin on lists.} For consistency, you can specify the amounts you want to here, or on the list (LI, DT, DD) items they contain. Don't forget that what you're doing here cascade to the .nav list unless you write a more specific selector. * / padding: 0;   margin: 0; } h1, h2, h3, h4, h5, h6, p {margin-top: 0; / * deletion of the top margin works around a problem where margins can escape its container block.} The margin of the low rest it will take away from all of the following items. * / padding-right: 15px;   padding-left: 15px; / * adding padding to the sides of the elements within the blocks, instead of the block elements themselves, gets rid of any mathematical model of box. A block nested with side pads can also be used as an alternative method. {* /} an img {/ * this switch how to remove the default blue border displayed in some browsers around an image when it is surrounded by a link * / border: none ;} / * ~ ~ style for your site links must remain in this order - including the Group of selectors that create the hover effect.} ~ ~ * / a: link {color: # 42413;}   text-decoration: underline; {/ * unless that you style your links seem to be extremely unique, it is best to predict stresses quick visual identification * /} a: visited {color: #6E6C64;}   text-decoration: underline; } a: hover, a: active, a: focus {/ * this group of selectors will give a browser keyboard the same experience of hovering as the person who uses a mouse. * / text-decoration: none ;} / * ~ ~ this container fixed-width surrounds all the other blocks ~ ~ * / .container {width: 960px;}}   background-color: #FFFFFF;   margin: 0 auto; {/ * set to auto on the sides, coupled with the width available to the centres * /} / * ~ ~ the header is not given a width. It will extend to the entire width of your layout. ~ ~ * / header {background-color: #A36BE8 ;} / * ~ ~ these are the columns for layout.} (~ ~ 1) padding is only placed on the top and/or bottom block elements. The elements contained in these blocks have padding on their sides. This avoids any «mathematical model of box» Keep in mind, if you add lateral pads or border to the block itself, it will be added to the width that you set to create the * total width. You can also remove the padding of the element in the block element and place a second inner block with no width element and the necessary padding for your design. (2) no margin was given to the columns, because they all floated. If you need to add the margin, avoid placing on the side you're floating into (for example: a right margin on a block set to float to the right). Many times, padding can be used instead. For blocks where this rule needs to be broken, you need to add a statement of ' display: inline ' to the rule of the block element to tame a bug where some versions of Internet Explorer double the margin. (3) given that the classes can be used several times in a document (and an element can also have several classes applied), the columns have received the names of classes instead of IDs. For example, two blocks from the sidebar could be stacked if necessary. These can easily be changed to the ID if that's your preference, as long as you don't use them once per document. (4) If you prefer your nav on the left instead of the right, just float those columns the opposite direction (to the left instead of all rights), and they will return in reverse order. There is no need to move the blocks in the HTML source code. * / .sidebar1 {float: right;}   Width: 180px;   background-color: #C5C2B8;   padding-bottom: 10px; } content {padding: 10px 0;}   Width: 780px;   float: right; } / * ~ ~ This group selector gives the lists in the domain content space ~ ~ * / content ul, ol content {padding: 0 15px 15px 40px; / * this padding reflects the right padding in the titles and the paragraph above net.} Padding was placed on the bottom for the space between the other elements in the lists and on the left to create the withdrawal. These can be customized as you wish. {* /} / * ~ ~ The list of navigation styles (can be removed if you choose to use a contextual menu premade as Spry) ~ ~ * / nav ul {list-style: none; / * this command deletes the list marker * / border-top: 1px solid #666; / * this creates the top border for the links - all others are placed using a bottom border on the LI * / margin-bottom: 15px; / * it creates space between the following content browsing * /} nav li {border-bottom : 1px solid #666; {/ * Creates the separation of button * /} has nav, nav a: visited {/ * these selectors of grouping allows you to ensure that your links to retain their look button even after visiting * / padding: 5px 5px 5px 15px;}   display: block; / * Gives the link properties block causing it to fill the whole container LI. This causes the entire area responds to a mouse click. * / Width: 160px;  / * This width makes all the clickable button for IE6. If you do not need to support IE6, it can be removed. Calculate the width by subtracting the padding on this link of the width of your sidebar container. * / text-decoration: none;   background-color: #15EE00; } nav a: hover nav a: active, nav a: focus {/ * this changes the background and color of text for browsers of mouse and keyboard * / background-color: #ADB96E;}   color: #FFF; } / * ~ ~ Footer ~ ~ * / footer {padding: 10px 0;}   background-color: #CCC49F;   position: relative; / * This gives hasLayout IE6 to erase correctly * / clear: both; {/ * This clear property forces the .container to understand where the columns end up and contain them * /} / * HTML 5 support - sets new HTML 5 tags to display: block so browsers know how to render the tags correctly. * / section, footer, said by the way, article, header, figure {display: block ;}}

  Thank you very much for your help!

  Try this-

  

  What you are because space is the placeholder for the descenders of glyph on any item that is rendered in a text box (that is, an inline element). By making the image "display: block" you eliminate that space, because a block element is not top-down. If it works to your satisfaction then you can give the logo an id and creation of a CSS selector that contains this kind of block.

• Please tell me exactly how to remove the AVG search function

  Please tell me exactly how to remove the AVG search function

  edited by a moderator for clarity

  You need not repeat dozens of times or use profanity to get help.

  (1) disable all non-essential or unrecognized extensions on this tab. Don't know what it does? When in doubt, turn off:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Use the links above a disabled extension to restart Firefox if some seem to.

  (2) restore your Google search engine:

  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  (3) check a user.js file (before the release of Firefox, otherwise the parameters in this file can cancel your cleaning) as described in this article: How to fix preferences that will not save.

  (4) If AVG search took over your page to the new tab (Ctrl + t), which changes as follows:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the filter box, type or paste newtab and make a pause so that the list is filtered

  (C) double-click the preference browser.newtab.url and enter the desired value for your favorite page:

  thumbnails (i) (default) Page = > subject: newtab

  (ii) blank tab = > subject: empty

  Firefox homepage integrated (iii) = > topic: welcome

  (iv) any other page = > full URL of the page

  IMPORTANT: If you have AVG software in your Windows Control Panel, you need to remove it.

• Satellite M35 Pro - how to remove the screen bezel?

  Hey everybody,

  Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

  Can you please help me with this!

  Thanks in advance!

  Hello

  Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
  You could damage other parts that you know

  You're stuck on the LCD mask?
  As far as I know the LCD mask is covered by two screws that are hidden under the joints.
  You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
  Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

  But note; Be careful, don't use any force!

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• Tecra M5 - how to remove the Bios password?

  Hey guys,.

  My Tecra M5 got a password for BIOS from one day to the other, I never told him to do.

  All of my passwords do not work, so how can I reset the password?

  Please help me :)

  I never heard that the BIOS password can be activated only then I m wondering really how that can happen in your Tecra M5.

  You must understand that the BIOS password is a very important protection and we cannot discuss in the public forum about this.
  How to remove the BIOS is not always the same and Tecra, as cell phone business model, is quite complicated procedure of withdrawal of the BIOS and it can be made by Toshiba only service provider.

  I'm sorry.

• How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Apple instructions for the removal of the malware did not help.

  How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Instructions from Apple to remove the malware have not removed despite them a number of times.

  Click here and follow the instructions. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  MalwareBytes is a removal tool and does not stop adware or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  (140621)

• How to remove the disk HARD passwordon Portege R500?

  Hello

  do you know how to remove the HARD drive password? I know the current password, but if I try to remove it by changing your current password to a blank password, it does not work.
  It has password always news.

  Thank you

  Hello

  I hope that you use the correct and just HARD drive password because it of necessary to remove and delete the existing HARD disk password.
  If you have forgot the password for HARD drive then the HARD drive should be locked and you would not be able to unlock the HARD drive!

  Generally, the HARD drive password can be deleted in the BIOS.
  Please ensure that another password would be removed too.

  I found a forum thread useful on a password disk HARD similar question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=66386𐍒

  According to the information published by the user jonr17 you must first make sure that all other like BIOS passwords, user and supervisor passwords are removed.
  Then try to remove the HDD from the BIOS password.

  Good bye

• Satellite L745 - how to remove the keyboard safely?

  Hello, people!

  I need help please. As the topic says, how to remove the keyboard?
  It's because I shared tea on my keyboard and, fortunately, no key was damaged. However, now it is sticky, and it is quite annoying!

  Can someone please help me with the entrance keys, Shift, back space * and other small keys at home.

  Thanks in advance.

  Sticky Keys?
  I really put t know if you will be able to clean the little mechanism under the CAP.

  OK you can try it. What you need to do is remove the key cap first. Pull it gently on the floor. It is set with small farmers in plastic. When the CAP is removed, you can check the situation and try to clean it up.

  When finished put the CAP in place and push it all smoothly. You will hear clicking noise and everything should be OK again. Do it for all the keys.

  Please take it very easy. If you damage this small mechanism you can immediately order new lkeyboard.

• Z500 how to remove the battery?

  
  

  Hi Flory2011,

  Len mentioned the Maintenance Manual material that is found on the link below...

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_z_p_series_hmm_v1.0.PDF

  You can also watch online tutorials on how to remove the bottom cover and the battery at this link in the section FRU...

  http://service.Lenovo.partner-management.com/content/CourseWarePublic/18359/player.html

• HP Slimline s3700y how to remove the Pocket Media DriveBay?

  How the guides do not describe how to REMOVE the Pocket Media Drivebay, what I must do to remove the CD/DVD drive.  The drivebay completely blocks access to the screws that must be removed so that the CD/DVD drive to slide.   Thanks in advance for browsing and/or in response.

  Please see this guide HP titled 'hard drive replacement' for instruction on how to remove the Pocket Media Drive. Step 2 in the section "Removing the primary hard drive" show clearly how to remove Media Player.

  Please send Bravo

• How to remove the virus boostspeed.exe

  How to remove the virus boostspeed.exe

  Hi Laurence,.

  As far as I KNOW, you're talking about Auslogics Bootspeed, and it is a program (even if some consider how he acts and what he does to be very similar to how the system will react as if he was infected).  For technical support, see: http://www.auslogics.com/en/support/.

  If it's this product, there seems to be any special product online removal process (but perhaps custom support can help). If it isn't this product or there is nothing like it on your system, then why do you assume that it is a virus - are guessing you or some AV programs, told you that (and if so, which) and how locate you the file name as being the problem?  What is the full path to the file (for example, C:\Program Auslogics... or other)?    What security software you have installed (all names and the exact version of each)?  What version of Windows are you using?  Indeed, please see http://support.microsoft.com/kb/555375 for ideas on other information that will help us.  The more we know, the better we can help and the more focused we can make recommendations.

  I would try the following: start by creating a system restore point, and then back up the registry as well (just to be on the safe side).

  Download the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html and use it in advanced mode to completely remove Auslogics Bootspeed.  If it does not work because it says it is running (which is possible if there is probably not), then start safe mode and try again to remove use Revo in Mode safe.  The chances of success are much higher now that it is not likely to be running in Mode safe.

  I hope this helps.  Please get back to us in all cases, and if it haunts you again, please answer these questions as well as what happened when you tried to remove it as suggested.  On this basis, we will have a better idea if we treat just a difficult program to remove or legitimate an infection of any (or possibly both) and take the necessary measures from there - but we need to learn more and to see if the simple answer works (or why it failed).  We desperately need your help here (provision of information) to be able to help (with recommendations and options and courses of action - or more questions).

  Thanks and good luck!

  Kosh