How to remove the screen magnifier?

I have mobilized the screen enlarger and I now want to remove it.  I can't find a way to eliminate it to come when I start my computer.

To turn off the Magnifier

1. go in Control Panel
2. double-click on accessibility
3 make your computer easier to see, click on the link "make the computer easier to see.
4. on the brand of the computer easier to see, under "Do things to the bigger screen", uncheck "turn on the Magnifier.

5. click on 'Apply' and then 'save '.

I hope I could help

Tags: Windows

Similar Questions

  • Satellite M35 Pro - how to remove the screen bezel?

    Hey everybody,

    Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

    Can you please help me with this!

    Thanks in advance!

    Hello

    Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
    You could damage other parts that you know

    You're stuck on the LCD mask?
    As far as I know the LCD mask is covered by two screws that are hidden under the joints.
    You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
    Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

    But note; Be careful, don't use any force!

  • How to remove the screen debugger in Adobe air applications?

    can someone help me remove screen Adobe AIR (unable to connect to the debugger) in my application .apk airScreenshot_2015-05-12-11-07-15.png

    How to remove this screen

    I tried disabling the debugger option in publication of flash CC settings. I always get this screen?

    After unchecking the option of the debugger you republish your air application and then check the date of creation of the application you are testing?

  • Tecra M5 - how to remove the screen hinges

    Hello

    I need to replace the hinges of the screen (well one of them anyway)
    I have the manual maintenance and computer in bits.

    The manual says "Disassemble the hinge (left) while drag and spin it.", but no matter how hard wiggle/slide/tour that I can't get out.

    Same problem with one of the other side.

    Someone has it already done this and have any advice or know of an educational video somewhere?

    TFAI

    Hello

    To my knowledge there is no textbooks that would show you how to disassemble the unit. Such dismantling manuals are made for the Toshiba service guys.
    Then maybe you'll find some tips and tricks on YouTube or would need to contact a Toshiba technician to remove

  • How to remove the screen frm ads on the side of the screen

    When the e-mail there are ads on the screen of the scroll bar blocking cannot scrolling up/down how eliminate these unwanted ads

    If you use firefox, you can use adblock plus (which is an add-on firefox) to block advertising completely.

  • How to remove the screen saver file?

    I'm losing all my icons because of my screensaver file is bad, please help me remove this file. Thank you... JAY PATEL.

    Hello

    1 are. what screensaver and icons you referring?
    2 have you installed any third-party screen saver file?
    3. what exactly is the problem?

    Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
    How to ask a question
    http://support.Microsoft.com/kb/555375

    If you try to uninstall third-party screen saver then the article below might help you to do.
    How to change or remove a program in Windows XP
    http://support.Microsoft.com/kb/307895

  • How to replace the screen of laptop DV4-1140go

    I replaced the many laptop screens. THS is different & hard!  Doesn't have a window on screen. The screen is like a plastic see through the cover outwards with the sticky substance around it. Any ideas on how to remove the screen?

    Hello:

    Sorry I can't help you further with your laptop.

    The only screen I already worked on that came from an old nc4000.   Only, I needed to replace the hinges. I had to separate the collar trim around the screen which is held with this Goo.

    I have no need to remove the real billboard to replace the hinges.

    Paul

  • How to remove the frame of the screen on HP G62-340US

    I have a broken screen I want to replace but I'm not sure how to remove the framing safely. There should be a few screws at the bottom, but I don't see any. There are plastic flat points where I thought I'd find screws. This model don't live on the bezel, so burst you just off the coast at the base? I watched a few videos on the internet, and each similar to mine model has screws on the bottom.

    HP G62-340US

    Edit: The plastic parts is proved be stickers. I used a sewing needle to take them off.

    Hello:

    If you have not read the help manual, I suggest you do so.

    Please refer to Chapter 4 for R & R procedures component.

    http://h10032.www1.HP.com/CTG/manual/c02641795.PDF

  • How can I remove the screen on a dv6-2110ea in order to replace it

    The screen on my DV6-2110ea was damaged and must be replaced. I do not see how to remove the wrapping there seems to be no screws as in other models HP

    Please refer to the procedure step by step Maintenance and Service Guide available at the following link:

    http://h10032.www1.HP.com/CTG/manual/c01860375.PDF

  • How to remove the SEND the COMMENTS tab on the bottom of the screen in 10.02

    One with ideas on how to remove the pesky "Send Feedback button in the lower r/corner of the window of Firefox 10.02.

    Hello

    Please try this: click on the "+" after the last tab and Customize. You can now click, hold and drag the widget customize. Customization of

  • Portege M200: How do I remove the screen to clean behind?

    I literally (little bug) bug that crawled up behind the screen on my M200, who died later - pixels so rather than dead, I have a bug dead - is there a way to remove the sensitive screen to clean behind it and replace it without damaging it?

    Nev

    Hello

    I t is recommended to remove the screen and open it.
    The screen is one of the most expensive parts of the laptop.
    If you have no experience in such proceedings it is possible that you may damage the entire screen.

    However, I think the screen is fixed with screws that you will find the image of the screen. But in your case, I recommend contacting the service to remove the dead bug.
    The guys have more experience and can remove it more quickly.

  • Portege M400 - how to remove the condensation of water?

    I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

    so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

    the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

    but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

    hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

    * so, how can I remove the condensation of water? *

    * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

    Hello olekike

    Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
    View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

    I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

  • PAVILION 22xi: COME PULIRE LO DEL PAVILION 22xi SCREEN / HOW TO CLEAN the SCREEN OF THE 22xi of FLAG?

    COME PULIRE LO DEL PAVILION 22xi SCREEN?

    Inoltre:
    Come rimuovere eventual aloni esistenti da previous pulizie?

    HOW TO CLEAN the SCREEN OF THE 22xi of FLAG?
    In addition:
    How to manually remove existing halos of previous cleanings?

    Hi there @antonio55,

    That the Forums are with you!  I understand that you are looking for advice on how to clean your screen.  I'm happy to give you a helping hand with this.

    Please see: HP monitors - Safety and Maintenance Guidelines, under the heading "Cleaning the monitor" for details of cleaning, but be sure to read both safety related information.  Depending on what you mean by "halos" try following the instructions for the materials to be used. If you have in the past used something on the list of cleaning products do not turn out to serve, you may have already damaged a part of the screen.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • any ideas on how to remove the software malicious zebrouss?

    any ideas on how to remove the software malicious zebrouss?

    This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

    You may have installed ad-injecting malicious software ("adware").

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Save all data first.

    Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

    If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

    If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

    If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

    This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

    Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

    If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

    Step 1

    Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

    ~/Library/LaunchAgents

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

    If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

    Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

    Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

    Leave the case open for now.

    Step 2

    Do as in step 1 with this line:

    /Library/LaunchAgents

    The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

    Step 3

    Repeat with this line:

    /Library/LaunchDaemons

    This time the file will be called "LaunchDaemons."

    Step 4

    Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

    Step 5

    If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

  • Equium A200 - how to remove the display?

    Hello.

    I need to remove the screen on my Equium A200 but there seems to be no screws to enter.
    None of the guides I found works for this model.

    No one knows how to do?

    Thank you
    Dan

    Hello

    Disassembly of the laptop is not really easy it s really complicated.
    If you have no experience so you should not do this, you may damage other parts

    But as far as I know to remove the keyboard and the top cover Assembly.
    Then you can remove the four screws under the rubber covers. This allows you to remove the LCD screen bezel.
    New measures, you will need to remove the screws from the display hinges.

    As I mentioned above; It's not so easy and be careful if you would remove anything

Maybe you are looking for