How to remove the setup.exe after the uninstall of a program
I downloaded a software from the internet, and after using it for a few days it uninstalled. Now what to do with its setup.exe files? How to remove it, should I just remove it? I just want to remove the software completely from my computer I'm not it use more.
Yes you can remove it manually.
Tags: Windows
Similar Questions
-
How to remove the engine of my programs Snap.Do
After running off of my my own uninstall program, the AdwCleaner, the HitmanPro and PC Cleaner SparkTrust + I still have the program snap.do engine. Someone can help me. I have tried for 2 weeks now, it makes me crasssszzzzy. Windows 7.
Thank you
Hello
Have you followed all the steps here?
http://malwaretips.com/blogs/remove-snapdo-virus/
See you soon.
-
How to remove the virus boostspeed.exe
How to remove the virus boostspeed.exe
Hi Laurence,.
As far as I KNOW, you're talking about Auslogics Bootspeed, and it is a program (even if some consider how he acts and what he does to be very similar to how the system will react as if he was infected). For technical support, see: http://www.auslogics.com/en/support/.
If it's this product, there seems to be any special product online removal process (but perhaps custom support can help). If it isn't this product or there is nothing like it on your system, then why do you assume that it is a virus - are guessing you or some AV programs, told you that (and if so, which) and how locate you the file name as being the problem? What is the full path to the file (for example, C:\Program Auslogics... or other)? What security software you have installed (all names and the exact version of each)? What version of Windows are you using? Indeed, please see http://support.microsoft.com/kb/555375 for ideas on other information that will help us. The more we know, the better we can help and the more focused we can make recommendations.
I would try the following: start by creating a system restore point, and then back up the registry as well (just to be on the safe side).
Download the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html and use it in advanced mode to completely remove Auslogics Bootspeed. If it does not work because it says it is running (which is possible if there is probably not), then start safe mode and try again to remove use Revo in Mode safe. The chances of success are much higher now that it is not likely to be running in Mode safe.
I hope this helps. Please get back to us in all cases, and if it haunts you again, please answer these questions as well as what happened when you tried to remove it as suggested. On this basis, we will have a better idea if we treat just a difficult program to remove or legitimate an infection of any (or possibly both) and take the necessary measures from there - but we need to learn more and to see if the simple answer works (or why it failed). We desperately need your help here (provision of information) to be able to help (with recommendations and options and courses of action - or more questions).
Thanks and good luck!
Kosh
-
I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?
I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespaceD: 74.2 GB with 70.6 freespaceThese are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WISo I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40I hope that makes sense to someone, any help gratefully received!As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.
J W Stuart: http://www.pagestart.com
-
How to remove the original RAW files after deletion of the intelligent insights?
Hello comrades!
I have change my series of photos with smart thumbnails, disconnected my external HARD disk (where the original RAW files). I deleted some pictures from the catalog, and I now have only the best photos of "keeper".
Could you help me please, how to remove the original rejection RAW from my hard drive external? If I connect my external hard drive and try to sync photos, LR offer me an import dialog box photos refused from the external hard drive, instead delete photos denied the original RAWs.
Thank you very much!
John
Stop disconnect the external drive before you delete the catalog releases and select Remove from the disk.
Otherwise, you will need to manually, delete them externally or reimport then them select all, make sure previous import is selected, Photos and then delete and remove disk.
-
How to remove the printer driver under windows Vista software
How to remove the printer driver under windows Vista
Hello
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems--------------
If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to remove the SEND the COMMENTS tab on the bottom of the screen in 10.02
One with ideas on how to remove the pesky "Send Feedback button in the lower r/corner of the window of Firefox 10.02.
Hello
Please try this: click on the "+" after the last tab and Customize. You can now click, hold and drag the widget customize. Customization of
-
Equium A60: How to remove the CD/DVD drive
I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't
Hello
I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.
-
Have recently acquired a used DC7600sff and I installed an operating system, I find editing F10 helmed by a request for a password/key entry. As I have no way to find the original person who put in place I cannot access F10. How delete/remove theF10 setup password I want to upgrade the Bios and firmware?
Hello:
It is very easy to do.
Turn off and unplug the PC.
Press the power button to drain any residual power.
Open the case.
Looking for a little rider of green color. I think that your model, you will find in the vicinity of the SATA data port.
Remove the jumper to pins.
Put it somewhere safe, or just hold it in your hand.
Plug the PC back in and turn on without the rider.
The password must now be provisioned.
Shut down the PC, unplug the unit, press the power button to drain any residual power and replace the Green rider where you removed it.
Put everything back together.
Fact.
Paul
-
Satellite A350 - how to remove the password?
Hello world
I am neck and I joined just the website
I have a problem with my Satellite A350I bought this laptop from an auction of trust, not on the net, with the attached unfortunately password that don t work of password, but clams House auction that he does,
What happens is when I turn on the first screen you see is looking for a password, I put in the so-called password that was given to me, but it won't work. When I try to enter the BIOS setup, he still wants the password to continue.This computer using Vista and I can't even replace the Vista disc in the DVD player because will not work because the op system is not started
I hope someone knows how to pass the password or can help me. I tried to remove the internal battery but no go, my email is [email protected] if you want to explain myself better thingsThank you to everyone
ColHi neck!
It's not so good news
I m not a Satellite A350 owner but if you want to remove the password you must contact an ASP and ask for help. Laptop technicians are know how to remove the password and so I think they can help you best.
On the Toshiba site, you can search an ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service providerGood bye
-
Satellite Pro L100 - how to remove the keyboard
I have a L100 which has been "sprayed"... don't ask...
How to remove the keyboard... ideas please
see you soon
Bob
Hello Bob
The keyboard replacement procedure is almost on all Toshiba laptops. At, first of all it must remove the cover above the keyboard (where the buttons are placed).
After doing this to remove the keyboard is very easy.
BTW: is your laptop under warranty? Please be careful about this.
-
Satellite A30 - 504 - how to remove the old HDD and new mount?
Hello
I have problem with my laptop satellite. After the turn on I've got Announces s.m.a.r.t. disk is damaged.
I do not have it is why I do not know how to remove the old HDD and replace the new statement.
I will be grateful for the help.Hello
Looking first for similar discussions in this forum? I guess that you didn t ;)
The advanced search option is very useful and you can search for single yarn that could help you.I found this:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12526&MessageID=45688and this
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12547&MessageID=45752
It seems that the hard drive on your A30 is in the optical drive, and you must remove all first the STRANGE before you get access to the HARD drive.
Best regards
-
How to remove the laptop battery?
Hello!
My question seems a little odd, isn't it? I bought a HP Pavilion dv7-1285DX two months ago. I don't know how to remove the battery from the laptop! Sounds crazy, I use HP laptop for 5 years, but I could not understand how the hell should I take the battery from this new guy! Could someone please tell me what to do. If you know how to do it please show it with a photo or something, or set up a website or video or something.
Thank you and all comments are appreciated.Siar
Message edited by Siar on 13/10/2009 02:26Hello
Follow these steps: -.
BE VERY CAREFUL!
Before you begin any Setup or uninstall procedure:
1 shut down the computer. If you do not know if the
computer is turned off or in hibernation, turn on the computer.
and then stop it through the operating system.
2. disconnect all the external devices connected to the computer.
3. disconnect the power cord.
4. remove the battery by following these steps:
a. turn the computer upside down with the front
towards you.
b. drag and hold the 1 battery release latch to the left.
(Disengage the front edge of the battery of)
the computer).
c. lift the front edge of the battery 2 and bring her back.
d. remove the battery.
Reverse the above procedure to install the battery.
-
How to remove the Exploit: Win32 / CVE-2010-3336
Original title: Exploit: Win32 / CVE-2010-3336
Does anyone know how to remove the Exploit: Win32 / CVE-2010-3336?
Hi Bob,
This may be due to malicious software or viruses on the computer.
You have security software installed on the computer?
If you have installed security software, I suggest you run a security scan and check if it helps to remove malicious software.
In addition, you can also run Microsoft safety scanner to search for infected files.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
See the link to download and run the Analyzer:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Please let us know if the problem still persists. We will be happy to help you.
-
How to remove the host geniric number?
How to remove the host geniric number?
Hi m KUMAR,.-You receive any host related error message generic?-Remember you proceed with recent computer between the calendar changes when things worked fine and now?Follow the steps in the article below and check if it helps to solve this problem:After return with more information pertaining to the matter for us help to help you better. -
How to remove the other program the Virus Protection Windows Security Center colume antivirus?
My PC run in Windows XP Home Edition. After you remove COMODO antivirus program, I find the untapped in Protection Virus Windows Security Centre colume COMODO antivirus program.
How to remove the Virus Protection Windows Security Center colume COMODO antivirus program? Need help & solution.
Have a good time.
Hello
* Go to start > run and type: wbemtest > press enter
* There, click on connect
* In the field at the top, where it says "root\default", type root\SecurityCenter instead, and then click the button to connect.
* At the bottom, click on the button "request... ".
* In the query box, type: select * from AntivirusProduct and click on apply.
* In there, select the entry with the guid {043803A3-4F86-4ef6-AFC5-F6E02A79969B} and click on remove below. Then close this window.
* In the query box, type: select * from FirewallProduct and click on apply.
* In there, select the entry with the guid {043803A3-4F86-4ef6-AFC5-F6E02A79969B} and click on remove below.This applies only to when you had installed Comodo. For other Antivirus and firewall, it will be a different guid.
I hope this helps.
Maybe you are looking for
-
Navigation Bar raise search results; no direct web page?
I use Google as my home page and the bar very high, where you are supposed to be able to type in an address and it takes you directly to the site, I think is disabled. Now when I go to type in the address, he brings just search results. I looked all
-
Satellite L40: Windows XP crashes often
Hello I am a happy owner of a L40 - Satellite - 18 that came with a XP SP2 as OS, everything was going fine until it crashes and showed me the blue screen (image memory) I thought at first, he was leaking memory simple and downloaded a RAM cleaner fr
-
How to disable the USB port and change DVD drive to read-only?
I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I
-
'Caps Lock' notification AUDIO 7 windows - seems it is no longer available
On Windows XP, I got audio notification when hitting Caps Lock. Is it possible to activate 7?
-
I did a search and could not find the answer, I unlocked my BlackBerry Torch to ProMobileMotion.com which was recommended somewhere on these forums, I used to have a problem with my unlocked Torch before going there, I was not able to receive or send