How to replace a hard drive in a mini 110-3131dx

Similar Questions

• How to replace a hard drive as a whole in a desktop computer

  How to replace a hard drive, installed new disk and bios doewsn can't see it.  other computers see reader and are able to access by car. What give3s with lt32e sony

  What is the model name of your VAIO computer? Please also provide the brand and model of hard drive you have installed.

• How to replace a hard drive in 1625CDT?

  I need to replace the hard drive in a 1625CDT. I have a disc, but can not find a way to get the case open. I also can't find the documents of support with instructions how to proceed.

  Anyone can provide guidance for this?

  Please don't tell me to take it to a service center. I am a PC technician and know how to work on computers... just not this laptop.

  I just need directions on how to enter the case in the HD Email me offline if need be.

  Thank you

  Hi Roger

  Well, if you're a PC technician should not be very difficult for you to change the HARD drive. An Assembly of all laptops is very similar and it should be possible for you to change or find the HARD drive without any detailed instructions.
  But nevertheless, I'll try to help you:

  Before starting the procedure, please remove the battery.
  Then remove the keyboard. To remove the keyboard remove cover of the band. The status indicator panel aims to snap
  in place. Do not use excessive force to remove or replace.
  Remove the 3 screws on the button of the unit. (There are K brand around the screw hole). Remove the four screws now the keyboard in place.
  Now carefully lift the keyboard.
  Pull up on the keyboard FPC Connector and locking of safety for the FPC T/P connector upwards.
  Then remove the screw Combo Module 1. Remove the door from the ram.
  Remove the screw Combo Module (m2, 5 + 18FP) in now the Combo Module in place.
  Pull on the Combo Module FPC Connector.
  Then the Module Combo will be fired, you can easily out entirely easily Module Combo

  Remove the system status indicator Panel. The status indicator panel is designed to snap into place. Do not use excessive force to remove or replace.
  Remove the four screws now the keyboard in place.
  Now carefully lift the keyboard, placing it face down on the touchpad. Ensure that you n t damage the Ribbon attached to the keyboard cable.
  Remove the two screws (screw M2, 5 + 4FP) secure the hard-drive.
  Hold the hard drive at the end of transportation by car. With same firm pressure, slide the hard drive in the direction indicated, you will feel it disconnect. Now take out the Bay HARD drive. Store your HARD drive Module in a safe and dry in the direct light of the Sun or heat.

  Hope this will help you ;)

• Equium - how to replace the HARD drive?

  Hello

  I need to replace the hard drive on my Toshiba Equium.
  Can someone tell me the procedure? I changed it once before, and I remember having to press one of the function keys when I turned on the laptop with the new hard drive installed.
  Should I have the recovery disk when the laptop is turned on with the new hard drive installed?

  Thank you very much

  Tim.

  Hey,.

  You should take a look in your user manual. Sometimes you will find a detailed how instruction replace the HARD disk, but it according to your laptop model.

  If you swapped the HARD drive, you need to reinstall Windows. Therefore, you can take the Toshiba Recovery disk that will restore the initial setup in a few minutes with all the drivers and tools. You only have to boot from that drive and that s all! :)

• HARD drive gone bad. How to replace the HARD drive and reinstall operating system without a recovery disk?

  I have a HP with Windows 7 Home Premium TouchSmart tm2.  The HARD drive is clicking and will not start.  Error: Device not found Boot.  I guess I have to replace the HARD drive, but how can I restore/reinstall operating system without a recovery disk?  Windows was preinstalled, and I have the product key.  Thank you.

  Hello:

  You can order a recovery disc defined by following the instructions on the link below.

  http://support.HP.com/us-en/document/c00810334

  or...

  You can download the 32-bit or 64-bit version of windows 7 Home Premium ISO on the link below and use your product key to activate the installation.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You need a program that will be able to burn ISO files so that the DVD is bootable DVD burning. Burn at the slowest possible speed for best results.

  Then install all the drivers you need for your PC support and driver page.

  Paul

• Satellite M110 - how to replace the HARD drive?

  Need to replace my hard drive because the original is f & % $ ed.

  I tried to connect the original hard drive from my other laptop via a USB cable to Sata, but it does not appear. You can feel it spinning. I was able to do a test of HARD drive on it and it failed in the Toshiba via a bootable CD. Since I can access the drive HARD to get to the recovery section, which is the best way to reinstall windows XP on it, so I can use the original XP key on the bottom of the laptop. As I know that you usually have the right version or OEM windows copy in order to use certain keys.

  Any help would be greatly appreciated.

  Would also be a Western Digital Scorpio Blue WD1600 8 MB 160 GB 2.5 "SATA Hard Drive fit for the Toshiba because they are all two SATA.

  Hello

  Your ad is a little confusing... What HARD drive you use in what book now?

  If you want to install the OS on your old/new HARD drive, so you can use t a converter USB SATA. Therefore, use it as internal drive HARD.

  In addition, a HARD of Western Digital drive would be appropriate due SATA port. :)

• Satellite L300-A13 - how to replace the HARD drive?

  I need to replace my drive hard because I got a disc error and I could hear noises from him. Someone knows the size of the current hard drive replace (either 3.5 SATA or whatever it is)?

  No space memory but actual size, so it can fit inside my computer and someone know a tutorial to replace by yourself?

  Hello

  To replace the HARD drive, you need a 2.5 HARD drive SATA interface. These 3.5 HARD drive you want to say are only for desktop PC s peut t used in laptops to buy a 2.5 so one.

  But it makes no difference which manufacturing you buy the HARD drive or the size. Just look for a 2.5 HARD drive SATA interface.

  Replace the drive is pretty easy: just remove the two screws on the underside of the cover of the HARD drive. You can exchange it.
  I know because I have the same laptop. ;)

• Re: Satellite P200-178 - how to replace the HARD drive?

  Is it really possible to replace the HARD drive on this model? I have another satellite & which was 2 screws & pulling on one leg, job done.

  The P200 has an opening apparently get actually on the HARD drive but it gets you on the underside of the car, so I think that you will have to pass the upper part by means of the keyboard.

  Can anyone help? I lost 70 pounds on a HARD disk that cannot be mounted?

  Thanks in advance

  Hello

  As far as I know on all models, it of possible to swap the HARD drive.

  According to the user manual on the underside of the laptop it is a case of HDD for HDD1 and HDD2. This coverage is provided by one or two screws, I think that should be deleted. After that, you are able to exchange the HARD drive.

  Take a look on the underside. HARD drive swap is not complicated and can be done in a few minutes. :)

• How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

  Hello

  I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

  Here are some technical details of my current system:

  -MacBook Pro 15 inch, late 2011 model A1286

  -OS yosemite

  -16 GB of memory/RAM

  -Currently using stock HD

  All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

  Thanks in advance for any help.

  You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

• How to replace a HARD drive

  I need a step by step guide on how to change a HARD drive

  Google is your friend:

  http://www.Google.com/search?q=how+to+change+a+hard+drive&ie=UTF-8

• Portege R200 - how to replace the HARD drive

  Fundamental questions about the Toshiba Portege R200 (purchased model birthday Thailand August 2005) are:
  (1) Please provide instructions to remove the hard drive (non-functional) (illustrations if possible)
  (2) model has enough space inside for hard drive 2.5 inch? (Impossible to locate 1.8 inches and below, to get the results of [expensive] calls to Toshiba - of interest only)

  Background:
  (1) while 3 years warranty in force I trecked (expensive) of Malaysia in Bangok (where to buy) at the headquarters of Toshiba (if you know Bangkok taxi drivers, you'll know what a test or going around in circles and the nonsense in the fire that was)... Toshiba agreed HD vibrating but reported would take 3 to 10 weeks to get the HD replacement (!?)
  (2) I was a few weeks later to the r - u (to tie)... They told me they couldn't help; I "should contact my provider...". This is an Asian model, in Europe, we cannot... etc etc.
  (3) a week later the HD has no
  (4) I contacted Toshiba but they told me the warranty expired 7 days before...
  (5) since this time I phoned and was put on hold for Toshiba in the region of London (several times), Singapore (3 times), Thailand (well, if you know how it goes, say-no more, shots of elbow-boost)...

  I got nowhere. But were invited by the media to bring it to the headquarters of Thai (yet)... It's all right, I'll book a flight and hotel etc now, shouldn't cost all that much more than the computer cost me initially...

  Oh, another thing, not very important: to help out me, I bought a lighter machine at Toys R us... 300 quid... for the love of antiquity I always want to get the old dog to this shiny Silver Anniversary edition slim R200 works again...
  I have a 2.5 "HD available (recond and costs all 9 quid in Brummagem) but before I destroy the old R200 dog by ineptitude... (and lost to carefree annoyance no assistance of Toshiba)... and/or on how to remove HD, please?

  Hello

  I have seen words about your question.
  AFAIK the R200 was equipped with the utility of the HARD disk protection. It is a feature to reduce the risk of damage to the HARD disk.
  Using the acceleration sensor built into the computer drive HARD protection detect vibrations, shocks and sings in the computer and automatically moves the HDD Head somewhere course, in order to reduce the risk of damage.
  But this function does not ensure that the HARD drive will not damage! It reduces the risk of damage!

  However, the HARD drive can be removed very easily.
  At the bottom of the unit, you will find the HARD drive Bay. It s close to the battery (on the left).
  You need to remove two screws to get access to the HARD disk 1.8.

  PS: You can use disks hard only 1.8. The 2.5 hard drives are not compatible.
  I discovered that you can use a TOSHIBA 60GB 4,200 rpm 1.8 HDD HDD1544BZK01

  Welcome them

• Satellite A200 - how to replace the HARD drive?

  Hey, I recently some strange problems with my laptop. I installed a new copy of Windows Vista and also tried with Windows 7 a few times. But eveytime I get problems. The installation of the operating system right. But after I installed some Windows updates my computer becomes very slow and at some point, I am unable to install any application, because it crashes just when installing... This happends with all the big software products such as Visual Studio, 3d Max, After Effects... etc.

  So I think that my HARD drive has a large number of bad sectors. I also tried to erase everything on my drive with KillDisk, but it hangs at 16%. Once again something that seems to be my HARD drive.

  But before you buy a new, I'd like to hear your opinions on my problem and I would also like to know how I have to replace my HDD on a Toshiba Satellite a200. I don't know where it is placed and what parts I need to unscrew.

  Thanks for any help.

  Hello!

  The HARD drive is placed on the underside of the laptop.

  The HARD drive on the underside Bay is fixed by two screws. Remove the screws and the HARD drive. Then you can swap the HARD drive.
  But unplug the AC adapter and remove the battery before doing this.

  The new HARD disk must have the SATA interface.

  Good bye

• Envy 17-j013cl: how to replace a hard drive in HP Envy 17 while keeping Windows 10?

  My hard drive in my Envy 17-j013cl is dead, so I found a good portable HDD replace - http://www.newegg.com/Product/Product.aspx?Item=N82E16822236561 & cm_re = wd_laptop_hard_drive-_-22-236-...

  I need to know if it is compatible with my computer. Also, how can I keep my copy of Windows 10 that was on the computer before he died?

  This hard drive should work fine. If you previously updated and activated Windows 10, you can use the tool offered by Microsoft to create a dvd Win 10. Just be sure to choose ignore when he asks for a license key. Your hardware must be saved on the servers of MS and will activate automatically.

  Download the tool here and make your dvd. Read also the instructions at the bottom of the page on operation of a new facility.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install?OCID=ms_wol_win10

• Qosmio G20: How to replace a HARD drive

  I would like to replace the second HDD with a bigger and use the one replaced as a clone backup of my system drive.

  Just did the cloning and want to insert the clone as 1 HARD drive for testing purposes, but I don't know how to do really what.
  Where the hard drives and how to open the laptop, but how to remove and insert are described in the manual?

  There is a flap/bracelet plastic (sorry no native speaker) that looks like you have to shoot.
  Tried a bit of pull up, but I dare not.

  Would be nice, if someone has already done this and could explain it to me.

  Hello

  Since the disk HARD in the computer is connected to a special connector, Don t you need not worry. Simply, enter it gently and swap the drives, nothing great will happen.

  Just trust yourself and shoot the thing, it will go with just a little resistance, but he died.

  Welcome them

• How to replace the hard drive on the Satellite A100-301?

  How to remove the old hard drive (deceased) and replace it with a new hard drive on the Satellite A100?

  I don't see that there is a harddiskbay that is easily accessible.
  Do I have to take off the whole backcover?

  Hello!

  On the bottom side of the laptop's HARD drive cover is fixed with a screw.
  Remove the screw and cover, then you can exchange the HARD drive.

  Good bye