How to replace Labview RT10.0 with RT8.2 on the remote system?

Similar Questions

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• "Information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. »

  Original title:

  MS Info

  I need to send a file Ms Info to Wb tech support so that they can help me with the game on steam download. Whenever they open the file it says it gives the following message "information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. "I tried to open it too and had the same error message how can I send a file not corrupted for them?

  Information MS cannot open this file.

  They should use Notepad to open the file when it is a txt file.

  Another way to create a portable system information file is to select the hotkey Win + R, type msinfo32 , and press ENTER . Click file, Save and name the file. This method creates a file with an extension of nfo file. Perhaps the recipient expects the file in this format.

• How to replace a specific color with transparent colors?

  I need to get the image of a control, but I want to change the background color of the control with a transparent color (like the handly image editor).

  I can't use the library IMAQ, so I would use the palette of the 2D image.

  I can read the pixel of data image by pixer, but... once the color replace is located, how to replace them with transparent?

  Thank you all

  It looks like you want the Mask.vi to 'create '. If this isn't the case, you can provide a code that indicates what type of situation, you do business with.

• How to replace a new HDD with the old?

  Original title: new HARD drive

  IM installing a new hard drive to replace my old. How can I reinstall windows 7 with all my files and programs?

  Here are a few options:

  • Create an image of the old disk, and then restore that image to the new drive.
  • Use a third-party disk cloning tool.

  The first option requires a good dose of experience. Ask a computer-savvy friend to help you.

• How to replace Vista Home Premium with XP Pro on Equium A100

  EQUIUM A100, Microsoft® Windows Vista do I have? ¢ Home Premium 6.0.6000, BIOS Version 5.70, CPU Intel (r) Core (TM) 2 CPU T5300 1.73 GHz, memory physics 1024Mo of RAM.
  I have worked with MS Windows since the older version and it is the worst OS I have ever met. So many things that worked well on XPpro does not work at all (the hardware video acceleration disabling for example) or are disabled by default (for example a stereo mix). And most of my XP-compatible apps keep grippements.

  So I intend to go back to Windows XPpro (I have the installation disc). I have no interest in dual boot.
  I want to keep the big screen on the satellite and also all the drivers concerned so that all things (for example, flash card) work.

  Where can I get the drivers concerned?
  In my opinion, there should be a Web download driver page that would meet this problem, but any help would be appreciated.

  Hi guys

  Do you remember the first days, weeks of Win XP?
  At the beginning of the career of Win XP not all devices and 3rd applications worked properly! It was the same situation like now with Win Vista.

  I think we should not blame Vista for compatibility issues, but we should wait the 3 manufacturers and sellers will provide all the drivers for this OS.
  I use this OS on my desktop. My computer works great with Vista. OK, it of powerful.

  @karldallas
  You will find all the XP drivers on the Europe of Toshiba page. Please see the installation instructions and follow this order of installation.

  @saty
  Please delete the upper and lower filters values in this key and restart the portable computer:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Greetings to all ;)

• How to fix an SD card with a (not mountable in file systems of error)

  How to fix an SD card with a (no file mountable systems error)?

  Use disk utility to reformat the SD card - all data will be entered (lost).

• How to create a tabular report with alphabetical link at the top

  Hello
  
  I have a db of the users table and have created a report based on this table, but I want that each letter of the alphabet at the top of the report so that users can click on the letter and see all the records where the username field begins with that letter.
  
  How can I achieve this?
  
  Thank you

  Hello user11243298 (please tell us your name).

  Your report query might look like this (assuming that the page number is 1):

  Select some_column1, some_column2
  of your_user_table
  where username as: P1_INITIAL | '%'

  For the letters at the top of the report, here are some options:

  -If you want that all the letters to appear or not lines, you can create a series of buttons or links, one for each letter and specify the target URL make return to the report page, defining the P1_INITIAL element to each letter.

  -If you want only the letters which were stored, is to create a dynamic LOV based on a query like this:

  Select distinct superior (substr (username, 1, 1)) d, high separate v (substr (username, 1, 1))
  of your_user_table
  order from the top (substr (username, 1, 1))

  Can use it for a list of selection with submit, again targeting the report page and the P1_INITIAL parameter to the selected value.

  Hope this helps (if this is the case, please reward it),.
  John

• LabView can generate with a click of the mouse to another program?

  I have an old PTZ camera and need to control the panorama functions / tilt but cannot interface for the camera software. I can control the camera through the old interface of the screen. Is it possible to generate a signal indicating that the operating system (Win XP) would interpret as a click of the mouse on the screen of the camera interface?

  Thank you

  Hi Rick,

  It's a bit of work, but the windows API provides functions for control of the mouse.  There are many available positions on this point, for example...

  I don't know if .NET offers any mouse event tools - if yes, it would be simpler.

  There are tools called 'Macro Recorder' that you could use to save some actions keyboard and/or mouse - and call these actions later using LabVIEW.

  If, by chance, the camera controls are sent via RS232, it would be possible to 'sniff' the comm interface and understand what the syntax is - then you wouldn't need the old application at all!

  Chance/Cheers.

• How to share tabs between my various Firefox installations using the new system of accounts of Firefox?

  I use Firefox Nightly (2014-02-18, 30.a1, x 64) on my laptop (Windows Pro 8.1 x 64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new system of accounts of Firefox (which replaces the old Firefox Sync account) and I created an account of Firefox for my computer laptop installation every night. Because the new account in Firefox does not work with the old Firefox Sync account, I replaced my installation Android of the beta version of Firefox with Firefox Nightly and signed account Firefox on my Android. However, when I try to send a tab of my Android installation to my installation of laptop using intend to 'Share for every night', every night asking me to implement a sync account, which is impossible to fill in my computer laptop system every night. I tried to replace my Android installation every night with an Android Aurora facility, but the same problem occurs.

  What's worse, is that even with my laptop and Android facilities signed on the same account in Firefox, I'm not all information is synchronized between 2 facilities. No story is shared, and I don't see the list of tabs opened from the other device. I can't move tabs between my phone and my laptop, which is something I've used every week I visited websites and read that my RSS FEED on my phone. Does anyone know how to share tabs using Firefox's new accounts? Does anyone know why Firefox accounts doesn't seem to be synchronization of data between my 2 installations?

  Hi gfactor:

  An update on this issue. I think that this (965811) was fixed in Firefox Beta 29.

  Please try beta if you have some time (just search for Firefox Beta on the google play and then install firefox beta) and let us know if Firefox 29 beta sendtab now works for you.
  

• System Information cannot open this .nfo file. The file may be corrupt or incompatible with this version of the information system.

  Recently, asked me to send a file .nfo of my system, and after that I created one that happens with the above error when you try to open it.  I found a few fixes for this issue but none applies to Windows 7.

  Help, please.

  Kurt R

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Can you get you your hands on a copy of another computer Windows 7 MsInfo32.exe or replace your current or paste the replacement in your documents folder and see if it works from this location?

• Able to interact with a Panel before the remote cRIO to a computer, but not another

  I have a cRIO application that publishes a remote façade for the monitoring and control of the application. A PC (Win7 & firefox), I can see, interact and control the cRIO through published remote façade. A second PC, also Win7, I can see and monitor the status of the cRIO, but no interaction does not control remote that opens and it's true that I use IE, FF or Chrome as a browser. When a PC is connected to the cRIO, via a dedicated Ethernet connection and only the cRIO and PC are on this network. For this private network of two devices, the PC is always the address 192.168.1.1 while the cRIO always use 192.168.84.199 (port 8000).

  The rules of firewall on both computers are configured to allow all inbound and outbound programs/ports/protocols to be used between these two IP addresses.

  Two PC's have development systems LabVIEW to update installed on it (which more or less guarantees that they have the minimum requirement LV of execution necessary to see and use a remote façade).

  What may be different on the PC who discovers, but cannot interact with the remote control?

  Right-click on the second, and then select "take control of this VI.

  As far I know - that a viewer of the remote façade can control the frame at any time - the rest cannot display.

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• How do I upgrade to Windows 7 Pro without reinstalling the operating system?

  I have a client who is moving from a workgroup to a domain based network.  About half of the computers are Windows 7 Home edition.  I need to upgrade to Pro so I can join the domain.  I was not able to find an easy way to do it since Anytime Upgrade no longer works on Windows 7.  The only time I did, I had to by a free license key and ended up having to completely reinstall the operating system.  So, how can I switch to Win 7 Pro without reinstallation of the operating system or go to Windows 8.

  Unfortunately, your only option now would be to buy a full version or upgrade to Windows 7 professional retail license and use the product key with the Express Windows 7 Home Premium Upgrade Wizard. It is, it's expensive:

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• How to display /etc/resolv.conf and other files from the remote host to the vMA host ESX4i

  Hi all;

  I'm new at VMAs, I put it in place and adds 5 Server esxi 4 and I can list the fines using vifp lists broadcast and works, very well but my problem is I want to interrogate the remote servers for this vMA host for example I need to check the contents of these files

  cat /etc/resolv.conf

  cat/etc/sysconfig/clock

  tail/var/log/vmkernel

  Discovered the following

  esxcfg-firewall - q and esxcfg-vswif - l

  Can someone please help me on how to run these commands or another way on how to get this information above hosts and ESXi 4. I checked the forum, but I don't see anything similair nature! now, either I'm stupid full because it's as simple as drinking water and so no one asked or I am just lucky to ask the right question, so be it, I appreciate your time and effort

  Thanks in advance

  Esxlinux

  So its worth your time through the vMA documentation to understand how to manage your hosts and it's main use case. The operations that you are trying to accomplish cannot be done using vMA... at least in the way that you are hoping for.

  See my vMA article and some of the getting started guides.

  cat /etc/resolv.conf

  You will want to use esxcfg-dns to list the configured DNS servers

  cat/etc/sysconfig/clock

  This file does not yet exist on ESXi, if you try to set the time on ESXi host, you should use NTP and it is also important to note that single ESXi uses UTC and no other options are available.

  tail/var/log/vmkernel

  If you need to display the host logs, consider using vi logger on vMA OR configure syslog on your host to send to the centralized syslog server

  Regarding the last two commands, they do not apply to an ESXi host and therefore these commands are not available.

  There are certainly differences between ESX and ESXi, understand the differences and orders to ask for certain pieces of information is very important. vMA can help with this, but you must understand the use case of vMA and what tools are at your disposal. The best way to start is to take a look at the documentation, to jump it and try to jump in, will just be confusing.

  Good luck

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".