How to replace the infected .dll file?

Similar Questions

• HOW TO REPLACE THE MISSING DLL FILES?

  I deleted the 3 DLL files when I deleted viruses from my Vista laptop. I get the windows error that they lack whenever it loads at startup.

  I use a laptop Dell Inspiron 1525 with Vista. I have all the MS updates. I have the OEM DVD supplied with my purchase.

  Any suggestions would be greatly appreciated.

  Thanks in advance.

  What dll? I think that these virus/Trojan dll, which are eliminated by your AntiVirus Tools, inputs registzry satrt them are always present.

  So, run regedit.exe, and then search for dll files and remove entries.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• How can I repair/replace the eapcfg.dll file

  A message box titled

  "ipconfig.exe Uunable component not found.

  contains the message

  This application has failed to start because eappcfg.dll is not found "."

  How can I fix this error?

  Problem transfer SkyDrive, but suggestions have been very helpful.

  Searched for the file missing on an old PC > copied to key for transfer to faulty PC.

  Open my computer > C drive > widows > System 32 > stuck key file.

  This procedure was also corrected problems that I had with some Web sites that have been freezing.

   

• How to replace the < root windows > file \system32\ntoskrnl.exe on a system running Windows Server 2003 for Small Business Server when the system does not boot without it?

  I use an old server.  I've been reading that you can fix the file for XP if you have the disc but Server 2003 a 5 disk, that you would use, or would you use even one of them?

  Hi BrianStoll,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope that helps!

• WPC.dll corrupted - how to replace the file on my laptop?

  Trend micro, microsoft scannow and defender all crash my machine scanning wpc.dll. How to replace the corrupted file? ... TKS

  Hello kilian99,

  You can try this download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html? tag = mncol install, Update then do a scan of your system to ensure that it is indeed clean. Once done, remove everything it finds. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  original title: Please help

  just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  Hello

  1A Windows XP installed properly on your computer?

  2. If it is installed, you face any problem with Windows XP?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  Try to do a Scan SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exefile and select 'run as administrator '.
  (d) in the CMD window, type:sfc/scannowand press the Enter key.
  (e) restart and see if that solves the problem.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.

• How to replace the SWAP file. SYS that bulky and bulky?

  Hello

  My question is how to replace the SWAP file. SYS that is bulky and bulky?

  Is it possible to "BRING" different "restore points" as separate files and reduce in size for the management and portability?:

  The simple answer to your question is no!

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• == CORRECTION of == how restore a registry saved without replacing the current One files

  ========================
  ==========FIXED==========

  ========================

  How can I restore A saved Registery without replacing the current One files

  --------------------------------------------------------------------------------------------

  Hi I have recently Updraged to Windows 8 then ERROR HIT and reinstalled 15 times

  And then downgraded back to Windows 7 I took all my files off .old, and then I

  need of my registry because all my games that I forgot the key to most of them his wondering just im

  because I just inport the right .reg to the registry, then it says cant traore explorer.exe and then restart I get

  0xc0000004F and theni reinstalling agen, agen, agen

  ================

  | what im saying here is. |

  ================

  can I insert a registery .reg without replacing the existing files to avoid fatel errors / crashes

  and I have manny stuff just to reinstall

  Hello

  1. where exactly did you go to the back-up and you try to restore?

  2. you try to restore the backup after re-installation of the operating system?

  This operation is not valid; When you reinstall the operating system, you will not be able to restore the registry backed up to the old operating system. And you can not do this without replacing the existing files.

  Import the registry can only undo changes that you have made.

  For more information, see the article:

  Back up the registry

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  Hope this information helps.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• to restore the msvcrt40.dll file

  to restore the msvcrt40.dll file

  If the file has been deleted, you can either try to

  (1) to perform a restore point system through the system restore feature

  'or '.

  (2) use a freeware call "recuva" and it will scan your drive for all deleted files are recoverable.

  be said in passing, do not try to download this dll from any Web site in order to replace your missing one.   If so, you will probably infect your system.

• How to restore the missing dll? -lack of plnradt.dll

  I get a message c:users\ (name) \app dataI Miss c:\users\ (name) \app data\local\plnradt.dll.  How to restore the missing dll.

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium SP2 multiple APPCRASH associated the mscorwks.dll file

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hi, I need help with the following:

  I have several applications crashing (for example: HP Media Smart, HP Health Check, ATI Catalyst Control Center, MYOB GST transitional Assistant), and they all point to the mscorwks.dll file (the same ID of locale and code exception).  The error message is " has stopped working" and it appears before the program even loads.

  Details of error among the APPCRASH s below:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NZGSTAssistant.exe
  Application version: 1.7.0.0
  Application timestamp: 4cb7d7e1
  Fault Module name: mscorwks.dll
  Fault Module Version: 2.0.50727.4206
  Timestamp of Module error: 4bf4c6a7
  Exception code: c0000005
  Exception offset: 00076d 55
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 5129

  Description:
  Stopped working

  I did a registry cleaning (twice) with Uniblue registry, I did a complete audit of viruses and malware, and I also did all the latest updates in the hope that the mscorwks.dll/s file would be crushed and fixed.  I initially (a month or two back) had one coming program with this error at startup. I ignored it because I still use the program.  But since then, more programs have been crashes with this error message and now it's interfering with some frequently used programs.  Is there any simple solution for this?  Thank you!

  Hey Chellse

  one of the worst things you can do for your computer is to use a registry cleaner

  the best you can expect is that it does not damage

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the sfc finds issues it cannot repair consider to borrow a vista of microsoft dvd and do a repair installation upgrade

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• replaces the former site files with the files edited on the remote server?

  How we replaced the redesign of my website with the old. The revised files are in a new folder on my desktop with a name other than the old files. For the server section to manage sites I click New to enter the same information as the info on my existing site or should I click on edit on the original server info. All information is the same for the location of the remote server, password, user name. The only thing different is the name of the folder where the new files are stored on my computer. Should I move the new files to the folder containing the old files. Help, please. More I read the more confused I became. Thank you. Karen

  It does not matter what drive name or folder you used on your computer.

  What is important is that the structure of the Local site corresponds with that on your remote server.

  Access the Site > Manage Sites > changing the definition of the old site > tell DW where to find the new Site Local folder.  See screenshot.

  

  Nancy O.