How to replace the keyboard for G60-535DX

Similar Questions

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

• Qosmio G20: How to replace the keyboard

  DOES ANYONE KNOW HOW TO REPLACE THE KEYBOARD ON A QOSMIO G20?

  Hello

  I m not an owner of the Qosmio G20, but the replacement of keyboard on the G20 is very similar to another series of laptop.
  If you want to remove the keyboard please follow these steps:

  1.) open view.
  2.) Insert your finger into the slot between the reinforcement of the keyboard and the computer. Then,
  Lift the keyboard bracket to unlock and remove.
  3. remove 1 screw from the keyboard hold the plate.
  4. remove the screws fixing the keyboard
  Lift the upper part of the keyboard and turn down the palmrest.
  6. remove the 2 screws of the plate support keyboard and remove the
  keyboard support plate.
  7 disconnect the cable from the keyboard connector on the system board CN3200.
  8. remove the keyboard.

  All that s

  But note; If you have no experience, please don t remove the keyboard.

• How to replace the keyboard of g570

  Hello

  I fall my lenovo g570, broken keyboard. does anyone know how to replace the keyboard?

  I couldn't go on the case.

  Thank you

  Hi resilience.

  Here is your manual of maintenance of equipment with the numbers of room and directions and videos in the second link.

  Go to laptops, essential, and you'll see the G570. Click on it and it will give you videos on the disassembly.

  Dave

  http://www.lenovoservicetraining.com/ion/

  http://consumerdl.Lenovo.com.CN/userfiles/Userguide/en/user's%20guides%20and%20manuals/G475G575/Leno...

• How to replace the laptop on G60 keyboard

  Trying to find a manual for HP G60-230US laptop replace the keyboard.

  Hello:

  Here is the service manual for your laptop on the link below:

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  Paul

• How to replace the keyboard on the Satellite R830?

  I need to replace the keyboard on my Satellite R830 as the space bar is not registered a press unless you press the middle of the bar.

  New keyboards are available on ebay, but can someone please provide instructions on how it is possible to replace the keyboard. A web search has been fruitless so far.

  Thanks in advance,
  Haydn.

  Hello

  Your warranty is valid?
  In this case contact the ASP in your country to replace the kneeboard, since this would be covered by the guarantee and he would be free of charge.

  As far as I know the keyboard replacement procedure is the same as for Portege R700 series
  It s difficult because you will need to remove the other parts like the
  Battery, sim card, express card slot, modules of memory, base Assembly to gain access to a
  Ribbon of aluminum on the back of the lid Assembly. Then you could cut the lid Assembly face to the top and peel the keyboard joined the insulator.
  And also you can not use the keyboard removed and isolator keyboard again. You will need to use new parts.

• Satellite L305D-S5904 - how to replace the keyboard?

  How to replace a keyboard on a L305D-S5904? My keyboard has been damaged and there is no option but in replaces it.

  Hello!

  Normally, you can remove the keyboard if you first remove the keyboard cover. Then you should see 2 screws holding the keyboard. Remove the two screws and now you can remove the keyboard, but don't forget to remove the keyboard cable too.

  Disassembly of the laptop is a little tricky and if you don't know how to make a laptop technician should ask for help.
  If your laptop is under warranty, the repair should be free.

  Good bye

• Satellite P300 - 271 - how to replace the keyboard?

  Hello
  I have a Satellite P300 - 271 and there are a few damaged keys. I bought a new keyboard for this laptop.

  Is there a caraa how do I replace the keyboard?

  Greets, Benjamin

  Hi Benjamin,

  As far as I know that these manuals are not for the public. Technicians certified for laptop only can download these manuals. You can download the normal user manual that came with your laptop.

  A friend told me to replace the keyboard to remove the keyboard first, support but it s fixed by screws on the underside. After that, you can remove the keyboard but be careful with the cable.

  Disassembly of the laptop is a little tricky. If you n t have experience with that you should ask a technician for laptop help.

• How to replace the keyboard on a pavilion dv9000?

  I ordered a new keyboard for my laptop.

  Are special tools required to replace?

  Is there a tutorial anywhere where I can access?

  Hello:

  Here is the link to the service manual for your laptop.

  Removal and replacement procedures can be found in Chapter 5, but read the preliminary info on Chapter 4, as appropriate.

  Section 5-11 gives information on how to remove the keyboard.

  http://h10032.www1.HP.com/CTG/manual/c01311536.PDF

  I don't think that special tools are needed. If you have the tools listed in section 4.1 you will be fine.

  Paul

• Portege R700 how to replace the keyboard

  Hello!

  One of the keys on my R700 R700 laptop model PT311A-00Y00Q has a broken key. Apparently, you can get spare keys, so I need a whole new keyboard.

  I found this on EBay: keyboard http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=Toshiba+R700+ & _sacat = 0

  But I can't find a guide to replacement of the keyboard, would you mind linking me to a guide?

  Thanks in advance.

  I've read some reports of users who have tried to replace the keyboard on the R700 and it's not very easy.
  It s difficult because you will need to remove the other parts like the
  Battery, sim card, express card slot, modules of memory, base Assembly to gain access to a
  Ribbon of aluminum on the back of the lid Assembly. Then you could cut the lid Assembly face to the top and peel the keyboard joined the insulator.
  And also you can not use the keyboard removed and isolator keyboard again. You will need to use new parts

• How to replace the keyboard on Satellite P300 - 20H

  Hello!

  I just bought a replacemant for my Toshiba Satellite P300 - 20H keyboard and I was wondering how to actually replace it?

  Any response would be greatly apreciated,

  Thank you, Sophie x

  Video on [http://www.youtube.com/watch?v=UQaBRJoH-M0] (2mins in) you "lever" off the coast of the plastic band that runs across the top of the keyboard and remove the 2 screws. I expect that the connector of the ribbon cable must be of the type where a hinged band (diff color to the body of the connector) holds the cable in place. It appears if the cable is fired and you push it when the cable is inserted. There is normally a line on the cable to show that you have completely inserted the cable and the cable is inserted instead. -Examine the original cable until you remove

• Satellite P200-1EE - how to replace the keyboard

  Ive just bought a replacement for my P200-1EE keyboard, I have an idea but how to replace, anyone know?

  Hello

  The keyboard is fixed with four screws that are hidden under the cover of the thin plastic strip above the buttons of the F1 to F12 keys keyboard.
  You may need to remove this plastic cover to gain access to the screws.
  But you must be careful because it could break.

  The keyboard is connected to the motherboard with a flat cable.
  First disconnect in order to remove the keyboard.

  But note; If your warranty is valid you should not try this because it might void the warranty.

• Re: Satellite A10-S100 - how to replace the keyboard?

  I need to replace the card key of my Satellite A10-S100.

  What are the steps I should follow? I have to unscrew all the screws in the back?

  Hi mate,

  You never exchanged a keyboard or any other part of the equipment of a laptop? Well, maybe you should ask a technician for laptop help

  I m not Satellite A10 owner but normally you remove the keyboard first (between the keyboard and display) bracket. Under the keyboard support, you will find a few screw now the keyboard. Remove them and then you can lift the keyboard but be Ume with the cable on the underside of the keyboard.

  Good luck! :)

• How to replace the keyboard on a Toshiba laptop? SOLUTION

  If your Toshiba laptop keyboard does not work as it should?

  If your keyboard problem comes from a spillage, a hard lump, or you simply worn, you don't have to worry about investing in a new laptop, you can solve your keyboard with a simple Exchange. The good news is that setting a keyboard does not have a lot of technical skill. In fact, keyboards are among the mobile more easy to repair.

  Remove the frame just above the keyboard. You will notice a Tin strip of plastic located just above the keyboard. This band is called the keyboard bezel and you remove by gently lifting the edge upward with your small standard screwdriver. Work your way through the bezel lifting as you go. The bezel is that a nod to the unit, so remember to be gentle, as you work your way through.

  Remove the screws from the laptop keyboard Toshiba G83C000872. When the frame is removed, you will find three or four screws at the top of the keyboard. Using your small Philips screwdriver, remove these screws and place them in a safe place where you will not lose them.

  Remove the keyboard. With the screws removed, gently lift the keyboard from the top down. You will notice a sliver of wire from the keyboard to the laptop. Lean toward the front of the keyboard so that you can access the ribbon cable connection.

  Remove the Ribbon wire. Take your standard screwdriver and gently push up the support locks, on both sides of the ribbon cable socket. These support slide locks up slightly as you push to release the wire.

  Connect the keyboard to replacement. Everything as you have removed the old keyboard, you will now push the replacement wire Ribbon in Ribbon decision-making. With a small screwdriver, push the brackets in place to fix the Ribbon.

  Screw the replacement keyboard. Using a screw, connect the keyboard. With the keyboard which is held in place by the screw, start the computer and test the replacement keyboard. Once tested, replace the remaining screws.

  Insert the bezel above the keyboard. With the keyboards now set by all the screws, place the bezel back on its opening and put it back. Start at one end and work your way through.

  Thanks for teaching.

• How to replace the keyboard Vaio 15 Flip

  If the keyboard on my Flip 15 suddenly stopped working. Market not even work in the BIOS. I tried a coercive power off and battery off pinhole and nothing has helped. The backlight still works and if I press Capslock on a USB keyboard, the green light on the laptop press Capslock becomes very well, but not a single key on the keyboard does nothing. The key of the Windows logo on the screen still works, and the Assist button still works. Good thing the BIOS menu takes in charge the touch pad AND the touch screen!

  I wanted to see if the keyboard was replaceable, so I can go on the order of one off eBay or something (unless Sony sells parts direct?), so here are some photos I took along the way.

  http://ark42.com/Sony/keyboard/Step1.jpg

  After power off, switch off the power of the battery using the trombone for 2-3 seconds

  http://ark42.com/Sony/keyboard/Step2.jpg

  After removing the 3 rubber feet, there are 10 screws to screw

  http://ark42.com/Sony/keyboard/step3.jpg

  Lift the casing to open gently and work your way around the edges.

  http://ark42.com/Sony/keyboard/Step4.jpg

  There are 8 screws that hold the battery. Remove and remove the battery.

  http://ark42.com/Sony/keyboard/Step5.jpg

  Although only the upper-left corner of these 4 screws is now directly the keyboard, remove the other 3 and turn the shutters to exit both cables in water. Remove the hard drive here will make it easier to push on the bottom of the keyboard later.

  http://ark42.com/Sony/keyboard/step6.jpg

  Yet once, only the top left screw shown here directly holds the keyboard, but the last screw attached to the keyboard is behind this metal, so unscrew the 5 others live here marked 1-5. These 5 will not come out all the way.

  http://ark42.com/Sony/keyboard/Step7.jpg

  Unplug the power to the fan by pulling upward. The last screw attached to the keyboard is behind the metal as shown. I folded just Assembly of the road a little to access the screw.

  http://ark42.com/Sony/keyboard/step8.jpg

  Here you can see where the holes behind the hard drive, which allows you to easily start the withdrawal of the keyboard.

  Only detach the superior, left and right by pushing upward and work your way around. The lower part of the keyboard (closest to the touchpad) will just slide upward and out after that the other 3 sides are released.

  http://ark42.com/Sony/keyboard/step9.jpg

  Here is another view with everything removed.

  http://ark42.com/Sony/keyboard/step10.jpg

  The back of the keyboard, showing where the 3 screws attached. Tablecloth for the keyboard cables attach to the motherboard by dragging the output to the front (not not turning up like those on top of the hard drive).

  http://ark42.com/Sony/keyboard/step11.jpg

  The keyboard is completely removed. Circles show where the 3 screws attach to the back.

  Well, I hope this is all useful to people. I put all together and the laptop still works fine. The keyboard does not at all well, but I know that I can replace it myself now.

  * edit * will probably order http://www.ebay.com/itm//171781254290 because it does not resemble Sony sells direct parts I can find anywhere. Ordered http://www.ebay.com/itm/260951528702 instead for like $2 more, because the Canada ships seemed faster than ships from China.