Similar Questions

• Start a new thread once a screen is shown.

  Hello

  I need to initialize a database after the first display of my application is showed, and I can't find the way.

  What method of screen I can use to do this?, I tried onUiEngineAttached, but this start the new thread before show the screen and it shows once the thread.

  I tried this also

  public public static void main (String [] args) {mainapp to PAP = new MainApp();

  theApp.enterEventDispatcher ();

  }

  /**

  * Default constructor

  */

  public MainApp() { final HomeScreen screen = new HomeScreen();

  pushScreen (screen);

  Executable task = new Runnable() {}

  public void run() {}

  DataBaseManager.init ();

  UiApplication.getUiApplication () .invokeLater (new Runnable() { public void run() {}

  screen.showTaskEnd ();

  }

  });

  }

  };

  New Thread (task) .run ();

  }

  But it shows the screen after run the new thread.

  How can I do this? any ideas?

  Thank you

  start a new thread within invokelater works very well.

• Start a new Thread in the activate() method

  Hello

  When my application is started or resumed after a phone call etc... I would like to perform some tasks in the activate() method. First of all, I would like to start a new Thread to call web services a bit, and when it's done, I would like to update the user interface.

  I tried to do. I created a new class that extends the Thread in the run() method, I placed all the relevant web service calling and code in the method activate() my main thread that I have done:

  MyThread myThread = new MyThread();

  myThread.start ();

  But I noticed that nothing seems to be done. So I simplified my code by removing all web service of the run() method calls and replaced by a wait method (500), followed by a method call to update the user interface (in this case it creates just a new ButtonField, just for testing purposes).

  But ButtonField never gets created.

  The new thread doesn't seem to be from all.

  Any suggestions?

  Thank you very much.

  Have you tried setting stop and monitoring of execution points using println?

  First of all, is called same activate()?

  Secondly, run() is reached?

  When the thread does the work of the user interface, if you have that in a synchronized block try block invokeLater rather.

• How to start a new thread and receive alerts by mail of the RTO?

  Hello
  
  I would like to point out a few question in OTN and at the same time, I'm intrest to enter the forums of mails in my mail box.
  
  Can you help me!
  
  
  Thank you

  IndianDBA wrote:
  I would like to point out a few question in OTN and at the same time, I'm intrest to enter the forums of mails in my mail box.

  You could probably help you as well.

  There is a link from the FAQ at the top right of the page - FAQ stands for "Frequently asked Questions" and usually provides answers to these questions. And your just questions are answered there if you care to look.

  I see that not only "you wish to post a few questions, but you have actually"have published the first question". If you seem to be on your way. Just note that there are many forums, and we encourage you to ask in the correct forum - find them by clicking on the 'Home Forum' link (top-left) and scrolling down (and don't forget to read the areas 'more... ("If you can't find what you want.)

  AND - if ask you technical questions, don't forget to include the operating system (including the publishing or distribution and version depending on the OS), version of the product (even if you don't think this is important) and error messages (copied, do not re-typed, if possible)

• "Start new Thread" is absent most of the time

  I'm not new to Dell Community, however, I post here in desperation of shear.

  I consider myself a person of intelligence average and the average Visual acuity.  I did not understand why sometimes I see the link "Start new Thread" and at other times, I would not.  I thought that there are a few steps to find what I didn't know.  I thought maybe the few times wherever I found it, it was by an unknown action, that I had taken.

  This morning I wanted to see a poster of beginner in another forum of the community on this community forum.  I tried looking for information before giving it to the other poster.  I have spent the last hour looking for this and other tips from the top downwards, for the link to start a new Thread.  I even read the how-to Post wikii and came out of the magnifying glass.  I couldn't find these 3 words!

  Then suddenly, after looking the other boards and back here, these 3 words were in plain view.  It's the durnest thing I've ever seen.  Sometimes the link is visible and sometimes it isn't!  What can I do for a beginner to this community when I have used Dell forums for 2 years, is having difficulty posting?

  What is someone having the same problem?  Whatever the issue, I will be very happy when it is fixed, it is very frustrating and time consuming!

  Thank you.

  
  

• Set title for the new thread

  Hi guys,.

  I have created a new thread, but do not know how setTitle for her, this is my code:

  public class MyThread extends Thread
      {
  
          String htmlString = "
  ABG
  Definition
  ";
          public MyThread()
          {
  
          }
          public void run()
          {
              try
              {
  
                  ByteArrayOutputStream output = new ByteArrayOutputStream();
                  Base64OutputStream boutput = new Base64OutputStream( output );
  
                  output.write( "data:text/html;base64,".getBytes() );
                  boutput.write( htmlString.getBytes() );
                  boutput.flush();
                  boutput.close();
                  output.flush();
                  output.close();
  
                  BrowserSession bSession = Browser.getDefaultSession();
                  bSession.displayPage( output.toString() );              
  
              }
              catch( Exception e )
              {
                  System.out.println( "Exception: " + e );
              }
          }
      }
  

  and this is my screen when starting the new thread:

  

  

  Threads have titles.

  If you are referring to your HTML content, why don't use you the title tag and see what happens?

• How do I get the number of threads in an application

  Hello guys '

  My application uses multiple threads. I need to catch the current number of threads when starts the new thread.

  Sometimes, my app stopped by unkown catch System.exception, end.

  TNX guys'

  () Thread.activeCount help you?

• How to start the new film w/o bundle?

  Hello

  I'm on a MacBook Pro. I noticed things may work more slowly Gets the biggest of my library. What I want to do, is to reduce what must read my ram.

  I would like to start a new movie without a bundle. How is that done?

  Other films allows this folder as a foundation without having to use everything in the folder as fcpx use as a library package?

  For me, this is a big drawback for a fab app. Where you cannot choose what film project has in its database. I wish I could take stuff 'offline' when I want to and able to link again as needed.

  Not to mention, because the sequences are called projects, it screws up to talk about the 'project' film, so there are a lot of ridiculous workarounds. Irritating.

  The best

  Elmer

  I think most of the users work with external supports. You can change where the library stores the media in the library properties.

• How to start a new movement in a room of several movement

  I want to bring a piece of several movement in Logic Pro X.

  When I finished the first movement (which worked just fine and dandy) I wonder now, how can I say logic I want to start a new movement.

  I created a new area for each track and want to start now with a new title and 1 bar.

  

  What is the step that is missing I m?

  Bar numbering in logic is global and cannot be reset mid stream.

  Options

  1 / disable bar numbers

  2 / create two essentially identical projects (for each movement)

  3 / create alternatives (above, except embedded in a single project)

  4 / set bar numbers print and print each movement separately. (OffBeat numbering bar - you can actually read 18 bar bar) 1 - print - then change bar 1 somewhere else (i.e. movement 2, 3, 4 etc.) printing.  -These settings are in the page layout-> names and numbers.

• When I start a new search of yahoo tab comes and I don't want that. How to make a different website to open?

  When I start a new search of yahoo tab comes when I start a new search yahoo tab comes and I don't want that. How to make a different website to open?

  You need to understand what you installed that changed this action to Yahoo on a blank tab, which is the default action in Firefox; and then get rid of this add-on. Then you can install an add-on that allows you to select what you want in the new tab.

  https://addons.Mozilla.org/en-us/Firefox/addon/NewTabURL/

• When starting a new spreadsheet in numbers I always get several sheets. How to remove?

  When I start a new spreadsheet, I always get several sheets. How to change it and how to remove additional sheets?

  Hi Dean,

  What model you open?

  To delete a sheet, click the v on the tab of the sheet and choose Delete in the menu that opens.

  Kind regards

  Ian.

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• How can, during the collection of data, start a new column in my table every 100 data points?

  Hello! I have a problem with my data - I get in a wide range of 1 x 1000, but it's the repeated measures, each taking about 500 data points. I want to break this table for this data string start a new column in my table every 500 points given. I don't know how to do it-please help!

  datacompiler100 wrote:

  Hey thanks for the sponsor and the first off I must apologize for the State, I am attaching my VI. I put the part of the VI that I am working on (my team has access, so didn't post everything here) and also attached the data file (when just written in a spreadsheet file, not through the attached VI). I want to convert the long row of data and then start a new column every 50, 100, 5 points (user-defined).

  Using the data from the file, you can reshape everything simply (as you already!), followed by transposition (since you want columns instead of rows). 2D arrays must always be rectangular, so the last column is filled with zeros if necessary. Is that what you want?

  

  Of course if you try to add a new column in a file, that will not work. You can only add lines in an existing file because of the way the data is organized. To add columns, the entire file must be read, intertwined and all re-written new data in the file.

• How to delete a contact in the menu 'To' drop down when starting a new email?

  How to delete a contact in the menu 'To' drop down when starting a new email?  Email is no longer in my list of contacts, but he continues to appear in the menu drop down and too often I am wrong send something to the wrong email since it is at the top of the drop-down list.

  2 possibilities:

  1. you have an invitation, that you still need to answer. The name stays on until you refuse the invitation. Then it will go away.

  Open outlook.com > top left, place your cursor on the Outlook logo > an arrow will appear > click on the arrow > click on people > here's the window of your people.

  Toolbar at the top, click on manage the > click on View Invitations > do you see an invitation? If so, decline the prompt will remove the names of th.

  2. There may be a suggestion of the application of the 'AutoComplete suggestion» It gives you the names so that you, at the same time, sent emails.

  You can remove this suggestion by doing this...

  Open outlook.com > top right, next to your name, click on the gear icon > click on e-mail settings more > under customization of Outlook, click Advanced Privacy settings > click the front point 'Only suggest people in my contact list' > click on save when finished.

  t-4-2

• How can I start a new campaign to a market segment already in an active campaign?

  Howdy,

  I have currently a segment of main group automatically feeding a campaign active nurture (feed 1). I now want to start a new campaign (2 Nurture) that starts as soon as someone registers as a new track.

  It is so kind of a culture before arriving in my campaign of main crop.

  The question how do I put this upward so that these new prospects are now in the new campaign of the innate (feed 2) without disturbing the old son slowly working their way through the old campaign (feed 1). I know I can do a "passage to the campaign" on the new campaign... but how can I prevent runways from being signed for the TWO campaigns at the same time?

  Any help would be greatly appreciated!

  Hi Amy,

  I recommend the construction of a nurture campaign auto-affectation (in the program generator).  You can then create logic to check if the led is being currently fed (using shared lists), evaluate the file in order to determine what innate to add to the campaign and easily add additional campaigns innate logic.

  This process allows us to manage more than 35 campaigns to cultivate on a hierarchy.

  See you soon,.

  Ryan