How to reset all revisions of Labview VI

The revision of all screws in a llb labview or the hierarchy can be reset to one.  I want all rounds to 1 before I'm officially disseminate the software to work. I know how to reset one at a time, but it's a very slow process.  I did a "Save as new hierarchy/llb of generation" on the high level vi thinking that would work, but now the chance.  If someone changes the setting to display the revision history, I want to show him 1 for all screws is there a way to reset the history of rev on several screws at the same time?

Thanks in advance.

VI, attached by Philip Brooks works perfectly!

http://forums.NI.com/T5/LabVIEW/reset-revision-history-for-all-vis-in-an-LLB/m-p/1254618/highlight/f...

Tags: NI Software

Similar Questions

  • How to reset all parameters display in windows 7

    Somehow, I changed the display settings so that all I see is huge icons and windows, and I can't find how to reset all the customization of the display by default settings, y at - it a command line, I can use or can you tell me how to reset 'blind' (even once, I can't see all the options (, only the parts of Windows I have open), thank you. NE4

    Two possible solutions:

    • Start the computer in safe mode and change the display settings.
    • Run the system restore and go back to a time before changed the display settings.
  • How to reset all preferences in Dreamweaver6 MX

    How to reset all preferences in Dreamweaver6 MX

    He cannot know

    First, you will need to enable cookies you OS get to the right place. It should be the same that the newer versions, but replace the folder Adobe Macromedia...

    Restore preferences in Dreamweaver CS4 and CS5, CS5.5

  • How to reset all & & stored in memory without having to leave SQL MORE

    How are you?

    I just wanted to ask how to reset all & & stored in memory without having to leave SQLPLUS?

    I kept a few variables when I used ' & &' and whenever I run my script, it does not ask me for values more.
    even after that I changed & & to '&' in my script, recorded and he run. AND even after I disconnected and reconnected! They're a real problem!

    Please help me beat him! :)

    [email protected] wrote:
    for each variable?

    is there a way to erase the memory of all the variables at the same TIME?

    No, but you can specifey many a KEPT variable:

    KEPT var1 var2 var3

    SY.

  • How the resets are generated in LabVIEW for FlexRIO

    All,

    My background is VHDL and Verilog for FPGA and ASIC implementations.  I guess LabVIEW has a point, an only synchronous reset to all of its logic.  I create a design that is going to be sections of VHDL IP, through IP integration node is instantiated. When writing to the top of my spec, I need to describe how a reset is spread to all the flops in the design that will be peer-reviewed of accuracy of the results. I need to understand exactly how LabVIEW handles resets to other areas of the clock.

    A simple case is the following: I have a 50 MHz external source synchronous data interface and will be a limited treatment of data in this area of 50 MHz using an IP integration node. This IP is designed to have the flops to reset synchronous on the 50 MHz clock.

    Separately, I have my most of my treatment and storage to the host (via DMA FIFO) in a field of 100 MHz clock, derived from the clock of 40 MHz I base I must transfer data from 50 MHz to 100 MHz using a FIFO.  This treatment at 100 MHz contains a floating-point operations that are reset to zero synchronously to the field of 100 MHz.

    In this scenario, you see I have two areas of clock with synchronous resets.  I need to understand how LabVIEW FPGA create reset signals which are entries to my integration IP nodes, in order to understand if I need to incorporate any reset synchronization within my VHDL circuits.

    Thanks for any help and if you need further details or context, please let me know and I find out additional details.

    -Jim

    Hey Jim,.

    So, option 2 then... in this case, you are looking at a signal of asynchronous reset and must realize in your VHDL similar to the following to ensure that your resets are say synchronously.

  • How to reset all default?

    Hello

    Is it possible to reset all controls by default? I have searched here and someone suggest you use the "reset to Default values" in the Edit menu, it works for the value field. But to control the structure of the case, it does not work. Any other suggestion (without programming)? Thank you

    Place the same even invoke noeud knot on the digram of block, then right-click and select Select the method > VI Server > VI > VI.

    After that once again right click and select Select the method > default values > reset all make them default.

  • How to reset all items on a page on the page change?

    Hi all!

    I'm trying to reset all items whenever a user edits a page. Then when they are on page 17, they can calculate the food values, and these values get inserted into page elements.
    Now, I want to be able to reset all these objects on page 17, when a user goes to one page other than 17.

    I did a page process, on the laundry after the header, visit runs once per page.
    The code is like this:
    if :APP_PAGE_ID <> 17 then
    :p17_set_unit := null;
    :p17_set_language := null;
    :p17_set_weight := null;
    :p17_new_weight := null;
    :p17_new_kcal := null;
    :P17_new_carbs := null;
    :p17_new_protein := null;
    :P17_new_fat := null;
    :p17_foodname := null;
    :p17_select_foodname := null;
    :p17_foodid := null;
    end if;
    So basically, if the current page is not 17, then it should reset all values. Why does this work?
    I made other processes that do the same (as when you change the language of food, all items except the point of language GET reset), but it does not work.
    What I am doing wrong? Or should I fix this on a different path?

    Thanks in advance.


    APEX version: 4.1.1.00.23

    Hello, Magali,.

    Oops! I missed it. We do not have the process on page 0!

    You can create a Process of Application which runs in charge of pages and clears the cache for the page 17 using APEX_UTIL. CLEAR_PAGE_CACHE. Use the above condition.

    Reference:

    http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_util.htm#BABCIAFJ

    I hope that helps!
    Kind regards
    Kiran

  • How to reset all data stored on the mac and modem addresses in win 7

    It seems that my brother when he comes to get the shop computer connected to the internet and it seems that something has happened when you choose what type of network, it is for the connected modem. the thing is that since that point the wizard has not arisen more and I was unable to use the modem to whom it happened.

    When I use my home connection, I use a connection wireless or wired even and all right, but I don't know how can I reset the data stored on the internet devices mac address and dns...

    so if I would again plug into the modem that has happened this problem, he probably pop ups yet what kind of network for the device connected.

    I tried netsh reset, but nothing happened.

    greetings and thanks in advance

    PS: I use win 7 Home Basic. x 64

    Lenovo laptop

    To reset the cache of MAC addresses: netsh interface ip delete arpcache

    To reset the DNS: ipconfig/flushdns

    Edit: remember to do as an administrator. It also can not solve the problem, but it is worth it.
  • How to reset all settings

    Hi all

    GGS 11.2

    I tested setup of replication to oracle successfully mssqlserver.

    I want to repeat the Setup again because I did not understand the process.

    I want to use the same set of diagrams and tables. So I want to delete everything I've done.

    What are the steps to cancel the installation?


    On the side of sqlserver:


    How to cancel or remove:


    ADD TRANDATA HRSCHEMA. FM3

    ADD MSEXT EXTRACT, TRANLOG, BEGIN NOW

    ADD RMTTRAIL/u01/app/oracle/gg/dirdat/ms, EXTRACT of MSEXT

    In the side oracle, how do I cancel or delete:

    ADD CHECKPOINTTABLE gg_user.chkpt

    Add REPLICAT 538D, EXTTRAIL/u01/app/oracle/gg/dirdat/ms, CHECKPOINTTABLE gg_user.chkpt


    Thank you very much

    zxy

    On the side of the source you do the following:

    DELETE TRANDATA HRSCHEMA. FM3

    REMOVE THE MSEXT EXTRACT

    RMTTRAIL REMOVE/u01/app/oracle/gg/dirdat/ms

    Note that this command only deletes the references to the path specified in the checkpoint file. It does not remove trail files themselves. To delete the path, use the commands of standard operating system for the removal of the files.

    On the side of the target, you'd do these controls:

    CHECKPOINTTABLE DROP gg_user.chkpt

    REMOVE REPLICAT 538D

    Removal of the extract and Replicat will remove checkpoint files but leaves intact parameter files, so you can then re-create the groups as you wish.

    Let me know if you have any other questions.

    Best regards

    Mary

  • How to reset Photoshop elements 12 tools?

    How to reset all default tools in Photoshop elements 12?

    See here:

    Photoshop elements tutorial 12 reset Brush & tool settings Adobe training lesson 7.5 - YouTube

  • How can I get my access code for reset all settings

    This HTML class. Value, this is how I can get my passcodefor reset all settings

    Salvation is Sha R,.

    If you ask what to do if you forgot your password for your iPhone, take a look at the user manual in the resources below:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled

    Take care

  • My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

    My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

    Hi Sashaxwp,

    To get small icons in your Start menu

    Click Start on the taskbar, and then select Properties from the context menu.
    Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
    This will display the Customize Start Menu dialog box.
    Use the Option Select an icon of Sice to Programms and now select small icons

    To configure your display appearance, wants to get small icons on your desktop

    Right click on an open area of the desktop and select Properties.
    Click the appearance tab.
    Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

    In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

    Good luck and have a nice day!

    Kind regards

    Rainer

  • How do reset you all the volume levels of the mixer at the same levels?

    When you manually set a certain level of volume for different programs how you define all programmes at the master volume level?

    do not reinstall the sound driver, use this

    //////////////////////////////////////////////////
    OFF @ECHO
    ECHO Reset settings Volume mixer...
    NET STOP Audiosrv
    NET STOP AudioEndpointBuilder
    REG DELETE "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore" /F
    REG ADD "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore.
    NET START Audiosrv
    /////////////////////////////////////////////////
    Save .bat & run with admin
  • How to reset the hyperlink (all together)?

    Hi, I have pages that contain hyperlinks. Behavior are consistent note and I made the mistake. In some cases, I manually changed the color of hypertext links without going through the window of a hyperlink. But my real question is that I have mailto: links that appear in the status window and the links pointing outside my site (www...) do not appear in the status window. I would like to clean the hyperlinks so that they behave always together; I can reset all links so that they obey the window of parameters of the States, or the window links. Why is there a difference? They are all links. Thanks for your help.

    See this discussion where a similar topic has been addressed.

    How can I change the text of hyperlink styles?

    You can change the default link in muse design?

    Change link styles

  • all fonts in capital LETTERS - how to reset?

    I use PSE14, I can not understand how to reset the text tool so that I can type in lowercase.

    * I'm not using a police all uppercase

    * I tried to delete the settings when you restart the Editor (does not work)

    Select the type tool, click on Tool Options and the the to the right, click the arrow facing down with four lines and click Reset tool.

Maybe you are looking for

  • internet speed test

    The cell data download speed

  • Satellite P770 - 10 p - download Win7 OEM

    Hi all How can I download* Win7 Home Premieum OEM Version * (maybe even with SP1) for my Toshiba P770 - 10 p? Already installed is the version I have baught the laptop. Since I have trouble with windows and need to reinstall, I need the correct versi

  • LabView RT versionconflict between the host and target

    Hello everyone, for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and

  • I just managed to get back to microsoft update.

    I just managed to get back to microsoft update and have downloaded 187 number of updates successfully, but on my control panel, add or remove window, they do not appear to have been recorded. Why /.

  • NAS200: formatting a drive time...

    Hi, NAS200 users. I am trying to format a Western Digital 1.5 TB (WD15EARS) and the console shows it is still formatted for almost two days! Across the street, lights always... So I have the following questions:-how much time will it take to get in s