How to reset the audio settings?

Similar Questions

• How to reset the network settings after an international trip

  I got an iPhone 6 overseas and had to do a manual network setting to use my phone.  now that I'm back in the USA, I need to know how to make it back to my home carrier for network settings.

  Hello

  GoTo settings reset network settings after reset entered your key wireless router.

  Also check the time settings ensure its self on.

  See you soon

  Brian

• How to reset the default settings for the adjustment brush presets. for example, dodge, burn, etc. ?

  Is there a way to reset the brush setting to factory settings? If I put a PIN on a photo using "burn", for example, it has a default value of negative exposure which is supposed to be there, and then I can change this value to get the effect I want on photography. If I want to then go back to the factory setting and put another pin on a different part of the picture and can't remember what the correct value has been set at the factory, how can I reset it?

  Thank you

  Jim

  Select the brush and click twice on the effect of the speech. Or you can double-click any pointer cursor to reset an individual slider.

• How to reset the wifi settings after a move and a new service?

  I moved and set up the new wifi service. How to get this printer (4620) back on wireless capabilities? I use Mac OS x 10.10.3

  Thank you people

  Hi @LaNita1950,

  I can help you set up the printer to your network!

  You have a USB cable, you can use to connect the printer to the Mac? If so, please connect the devices, then open the Applications folder and find the HP folder. In the HP, search for peripheral Utilities folder and open the HP installation wizard.

  In the Setup Wizard, you will see the option to configure the printer to the network via the USB port.

  Please let me know if this resolves your request. Thank you.

• How to reset the settings of my screen?

  I am currently using a laptop Lenovo T430s which does not support more than two monitors.

  Unfortunately, I made a courageous decision and tried to do exactly that.

  [Control Panel > display > screen resolution]

  [- Multiple views: extend these screens]

  Now, when I plug in two additional screens, all 3 are black screens.

  Very well.

  After consultation with the help, the majority of the replies revolves around changing the settings to the way they were (go to the menu of xyz and adjust in the opposite direction).

  However, it seems that in this situation even if you, say, connect one of the additional screens in clear, once you plug in time he returned to a "profile 3 screen", develop screens at once and the problem persists.

  So, I'm looking to reset my display in all settings.

  Is there a way to do this outside of a system restore?

  Thank you!

  Hello Alden,

  Thank you for visiting Microsoft Community.

  According to the description you want to reset the display settings on the system.

  Certainly, I understand your concern.

  I suggest you check the suggestions in the following Microsoft Community links below and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/how-do-i-reset-default-display-settings/f5392f31-10ed-407D-ba5a-5b065e3b8663

  Note:  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  The steps above applies both to Windows 7.

  For reference:

  We may also refer to the article below and check if that helps.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How to reset the windows media player 12 default settings

  Original title: how to reset the windows media player 12 default settings

  My Windows media Player 12 has stopped play all the sounds (Win 7 HP 64 bit) - I can play sounds with Windows media Center, DIVX, etc. of Winamp, but not with Win Media Player. I would like to reset Windows Media Player 12 to its default state, either by doing a reset or reinstall. Can someone tell me how to do what you please?

  Do these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]

  1 unload WMP - Panel, programs and features, [left] turn on or off has Windows, multimedia features, clear box Windows Media Player, Yes, OK, restart the PC.

  2 reload WMP - Panel, programs and features, [left] turn Windows features on or off, multimedia features, set the Windows Media Player box, Yes, OK, restart the PC.

• How to reset the permission for application settings after installation?

  Hello

  One of my clients just sent me and she accidentally disabled (this refusal) "Geolocation" permission when you run the application for the first time.  She tried to uninstall and reinstall the app, but she says that the permissions screen is then short-circuited.  Does anyone know how to reset the settings for authorization for an application on the Playbook?

  see you soon

  Mark

  Unfortunately I still haven't a tablet to test this on, but looking at the screenshots of settings menu on the berryreview.com website, it seems that permissions can be managed in the Security tab.

• Adobe first CC 2015 reset the Audio hardware settings

  Hello

  I have a curious scenario; I think that it is related to all these discussions about audio problems in first CC 2015. I have a client running a new Mac Pro with CC 2015. It worked fine for several months until last week. First began to change the audio settings in Control Panel preferably on its own. The symptoms are that audio stops completely and video playback stops working as well. You see just a still image from the video. This happens on after 10-15 minutes of editing. We have been able to temporarily fix things in going in the Audio hardware preferences and changing output and input built-in by default. Which only solves the problem for 10-15 minutes well. After that, we need to restart the machine in order to restore playback. This happens with any project.

  My client is running first for 2015 CC version 9.0.0. (247) here's a screenshot of its audio hardware settings and OSX sound control panel.

  

  I think that things should be set to audio built-in by default. But what happens is first keeps changing the default entry, the default output and Master Clock to tell the Audio display fields. Sometimes it shows as DisplayPort as well. Notice that this is different from the output that we defined in the acoustic Panel. We have removed our media Cache files and this always seems to happen.

  Any advice on what is happening?

  Hi André,.

  The 9.0.2 patch for Premiere Pro CC 2015 comes out that has a fix for the Multicam. Please update and verify.

  Premiere Pro CC 2015 update (9.0.2) | First work Pro area

  Vinay

• How to reset the first 12 items general preferences?

  After using the first 10 items for some time, I now have the first 12 items on my PC, I firstly the duration for still images of 5 seconds, not the default 6.  I made a mistake when you do by changing the duration of transitional Default video by mistake, realized my error and reset that 30 images (is that correct for PAL)?  I then changed the duration of stills from 150 to 125, even if it's to show 150 when I go to General preferences.  When I import a still image in, it says 5,00 s, image active project, but when added to the project all the pictures say duration 5.01 seconds.  I have no idea what I did wrong and why 5.01 seconds seems to be the term.

  Please could someone tell me how to reset the preferences General return to the default settings, if that is impossible, that I would have all the parameters of general preference to PAL?

  Thank you very much in advance for your help.

  DSgal

  Same thing in first items 10 and 12.

  If you have a PAL project, when you open Edit Menu/preferences/general, you will see the default settings

  The video Transition default duration = 30 images

  In the PAL 25 fps project, these 30 images are equivalent to 1.20 seconds.

  Audio Transition default duration = 1.00 seconds

  In the project 25 fps PAL, second 1.00 equals 25 frames

  (samples vs audio frames is another story for another time)

  Always default Image = 150 executives

  In the PAL 25 fps project, these 150 frames are equivalent to 6.00 seconds.

  The above default values will be applied to all of the pictures that are imported AFTER that all bets are off.

  If you want to change the still Image default duration for the project of 6.00 to 5.00 seconds, BEFORE the import always replace you

  150 images to 125 frames. This gives 5.00, not 5.01 seconds.

  Examples

  6,00 second duration = 150 executives

  Duration 5.00 seconds = 125 images

  Duration 4.00 seconds = 100 images

  3.00 second duration = 75 images

  Duration 2.00 seconds = 50 images

  length of second 1.00 = 25 frames

  Yet, these settings are made BEFORE and not after import again.

  If you are in the project with your still images already on the Timeline with the still Image default duration of 150 executives (6.00 seconds) as defined in the preferences and you decide to change the duration of the still of 6.00 seconds to 5.00 seconds, then you do a right click of the alembic, select Time Stretch, and set the Time Stretch dialog to 5.00 seconds.

  Example in the Time Stretch dialog... from 00; 00; 06; 00 00; 00; 05; 00 (hours, minutes, seconds; images).

  This can be done for a timeline yet, or more than one timeline yet at the same time.

  Please consult the bulletin and review, and then let us know if you are OK with the details.

  Thank you.

  RTA

• Reset the network settings

  My network connection to internet is good.  But the MacBook can't connect. How do you reset the network settings.

  Follow the instructions in this thread How to reset network settings completely a Mac?

• Satellite A300 - error occurred in the audio settings

  When I try to watch a DVD or movie files from an external hard drive using a TOSHIBA DVD PLAYER, it finds the file or good movie starts to play and then an error message pops up saying to what follows - * an error has occurred in the Audio output settings. Please check audio driver is implemented properly.*

  I want to know how to access the audio driver to check the settings. Any help would be appreicated.

  See you soon

  Dale

  Hi Dale_S,

  It depends on the sound card you have, but normally you can access the settings through Control Panel > Realtek sound effect Manager.

  As the error already say you could also try reinstalling the driver. It only takes a few minutes.
  In addition, it would be interesting to know if this happens with other players, like VLC media player.

• ProBook 4320 s: how to reset the bios password

  Hi guys, I Don t know if this thread is in the right place, if not mods can move.
  
  I need to know how to reset the password of the bios for HP ProBook 4320 s.

  @Spaha

  I couldn't find one in the warehouse so I did not test this.

  Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  http://welcome.HP.com/country/W1/en/contact_us.html

  When you talk to the HP rep ask them to increase your service request.

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD... "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  I would like to know the result, so I can update my list.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  

• I have a MN700 router for my wireless. How to reset the password?

  I have a MN700 router for my wireless. How to reset the password?

  I contacted Microsoft via the phone, but because they no longer carry this point they couldn't help me.

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Here is the manual for the device...

  http://download.Microsoft.com/download/b/6/9/b69c956c-85d9-4641-aa6f-1548391e0967/mn700_base_station_configuration_guide.PDF

  Reset the router and set it up as if it was the first time. Then, you can simply choose a new password and security settings.

• in windows 7 How to restore the security settings for the default settings? __

  in windows 7 How to restore the security settings the default settings?

  Hello

  This will reset all security settings in Windows 7 by default.

  Start Menu - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  Type or copy and paste it at the command prompt:

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Press enter

  -------------------

  Other methods:

  Restore Windows 7 to default security settings
  http://www.AddictiveTips.com/Windows-tips/restore-Windows-7-to-default-security-settings/

  Restore the security settings to default Windows with Rizone security restore
  http://www.thewindowsplanet.com/305/restore-Windows-security-settings-to-default-with-Rizone-security-restore.htm

  Check this free utility:

  Ultimate Windows Tweaker, a Tweak UI for Windows 7 & Vista
  http://www.thewindowsclub.com/ultimate-Windows-Tweaker-v2-a-Tweak-UI-for-Windows-7-Vista

  -----------------------------------------------------------------------

  More information:

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd548337 (WS.10) .aspx

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd560691.aspx

  Steve Riley discusses the security features of Windows 7 to the RSA
  http://www.Microsoft.com/video/en/us/details/3bce5c98-CE93-46b5-9a1a-3a2914059ad1

  Windows 7: explore new and improved security features
  http://www.Microsoft.com/security/products/Windows7.aspx

  Windows 7: security and Protection
  http://TechNet.Microsoft.com/en-us/library/dd571075 (WS.10) .aspx

  A Guide to Windows 7 security
  http://www.PCWorld.com/businesscenter/article/171979/a_guide_to_windows_7_security.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.