How to reset the network settings after an international trip

Similar Questions

• How to reset the wifi settings after a move and a new service?

  I moved and set up the new wifi service. How to get this printer (4620) back on wireless capabilities? I use Mac OS x 10.10.3

  Thank you people

  Hi @LaNita1950,

  I can help you set up the printer to your network!

  You have a USB cable, you can use to connect the printer to the Mac? If so, please connect the devices, then open the Applications folder and find the HP folder. In the HP, search for peripheral Utilities folder and open the HP installation wizard.

  In the Setup Wizard, you will see the option to configure the printer to the network via the USB port.

  Please let me know if this resolves your request. Thank you.

• Even though I have my iPad WiFi connects to the internet even after that I have reset the network settings

  Having never had a problem with my iPad since buying about 3 years ago, suddenly I can't access the internet use it & none of the applications that need the internet have access either. (since the last update for IOS 9.3) I have reset the settings of the internet and the WiFi signal at the top is visible. Airport app told me that I have access to the internet, but I did not!  Does anyone else have this problem? I would really appreciate a quick solution, because it's so annoying when things sync and I need them to-such as the events of diary, photos email etc. not to mention the SMS!  Any help gratefully received!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Reset the network settings

  My network connection to internet is good.  But the MacBook can't connect. How do you reset the network settings.

  Follow the instructions in this thread How to reset network settings completely a Mac?

• How to reset the audio settings?

  I frequently use Skype to chat with my friends, and recently, I accidentally changed an audio setting origin of Skype to play strong rediculously out of my helmet or not to use my headset at all. I tried to change the setting back, but it did not work. Is it possible to reset the audio settings in Skype?

  I'm not sure what could be the problem, but you can always re-install Skype and use this opportunity to upgrade to the latest version.

• Photosmart b209a more: how to change the network settings?

  I have this printer on a wireless network connection. In a few weeks will change my broadband service, which is to get a new router. Is there an easy way to change the network settings for this printer to connect to the new router, without having to reinstall the printer software?

  Here's what you need, your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-plus-all-in-one-printer-series---B2/3777155/model/3777156/drivers

• How to reset the default settings for the adjustment brush presets. for example, dodge, burn, etc. ?

  Is there a way to reset the brush setting to factory settings? If I put a PIN on a photo using "burn", for example, it has a default value of negative exposure which is supposed to be there, and then I can change this value to get the effect I want on photography. If I want to then go back to the factory setting and put another pin on a different part of the picture and can't remember what the correct value has been set at the factory, how can I reset it?

  Thank you

  Jim

  Select the brush and click twice on the effect of the speech. Or you can double-click any pointer cursor to reset an individual slider.

• IPSEC or AnyConnect for MAC OSX. How to view the network settings on the client

  With Windows using AnyConnect or IPSEC on ASA Cisco's customer, I can type IPCONFIG/all and see associated network settings - search IP addresses, DNS, domain, etc. under the Cisco VPN adapter. This is very useful for troubleshooting connectivity issues.

  I can't find similar commands for MAC OSX (GUI or command line). Networksetup does not seem to see any VPN adapter at all.

  Can we with a better knowledge of MAC I have help? Thank you.

  I use both OS X built-in Cisco IPSEC's and AnyConnect. I can't speak to

  Cisco IPSEC client.

  So with AnyConnect market I can click on the menu ca and see some statistics

  as IP address, etc.

  ifconfig returns:

  utun0: flags = 8091 mtu 1406

  INET 10.10.10.91--> 10.10.10.91 netmask 0xffffff00

  I can see the ip address and dns with AnyConnect down and accumulated in IPSEC

  servers in use through network prefs gui and if config returns:

  utun0: flags = 8011 mtu 1280

  INET 10.10.10.91--> 10.10.10.91 netmask 0xffffff00

  You should try to get out of old Cisco IPSEC client if you can.

  Do you use an ASA? On an ASA5510 with 8.2 software is only $100 for a

  250 user base AnyConnect client license.

  Brandon

  Wednesday, February 17, 2010 at 12:20, kbyrd

• Satellite A500 - how to restore the factory settings after upgrading to Windows 7?

  Hello

  Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6).

  The problem is that I have for my backup DVD because my DVD burner work not at all :/ Now I just wonder how could I return for win Vista without the DVD. Is it still possible? I also do not have small jets CD I bought my laptop. So, what should I do?

  null

  Hi stab them.

  I think that I n the new good t for you: restore factory settings without Toshiba recovery disc isn t possible in your case! :(

  First of all I think it's normal to s no recovery disk is delivered with the laptop as you will need to create them yourself using the Toshiba recovery disc creator. That is why it s recommended using high quality as Verbatim DVD-R media.

  I think that the only option to recover to factory settings is to order a new Toshiba recovery disc.
  https://backupmedia.Toshiba.EU/landing.aspx

  I put t understand why you didn't create this disk, because after the first boot, if you shut down the computer area, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• BlackBerry Smartphones BB Bold resets the default settings after each sync

  Hi all. Have had my new BB's "BOLD" for a week now (been a curve). Every time I Sync BB to the PC, my image of the homescreen on calendar/message alert tones, ringtones and the BB are all reset to their default settings. Im running windows XP with Outlook 2003 Professional and have BB desktop version 4.6.0.12. And synchronization using the USB cable. I have a memory card of 2 GB on BB with Mode mass storage activated when connected and Media Card Support turned on. I'm doing something wrong? Or is there a flaw with BB or software?

  <:AtomicElement>Please help, because I don't want to keep spending 20 to 30 minutes of introduction of BB after each synchronization.

  <:AtomicElement>

  <:AtomicElement>Thanks in advance for any help or you advise.

  tblatti wrote:

  Hello

  I can confirm, same issue here... resets after each default sync... what a pain.

  Concerning

  Tom

  Hi Tom

  Yes, it's a pain, but fortunately, I joined another forum and the answer was within two hours, in contrast to this one where after 3 weeks I still didn't have an answer.

  The solution is to remove all downloaded ringtones and pictures, from the memory of the device and store it on the map. It's this simple shame, nobody on this forum only!

  I surpose still same Blackberry experts don't know everything

• Lose the network settings after being off

  Hey all,.

  Recently bought just the XPRT and I love it! Fast phone with a soft keyboard. I use the phone in Australia so I use the mode of GMS/UMTS network.

  I want to turn off my night phone to save battery power that often forgot to charge my phone. However, when I turn on my phone it restores the Sprint network mode and turns on the entire guards and disables data connections. So you have to change it every time is a bit boring, so I was just leaving my phone in the night.

  Is it possible to save these settings, so I can turn off my phone at night? Or do I have to leave my phone?

  See you soon!

  Just turn on airplane mode before on you stop at night. Then when you turn it on the next morning they did re - define everything in the app from Sprint.

• How to reset the permission for application settings after installation?

  Hello

  One of my clients just sent me and she accidentally disabled (this refusal) "Geolocation" permission when you run the application for the first time.  She tried to uninstall and reinstall the app, but she says that the permissions screen is then short-circuited.  Does anyone know how to reset the settings for authorization for an application on the Playbook?

  see you soon

  Mark

  Unfortunately I still haven't a tablet to test this on, but looking at the screenshots of settings menu on the berryreview.com website, it seems that permissions can be managed in the Security tab.

• How to reset the settings of my screen?

  I am currently using a laptop Lenovo T430s which does not support more than two monitors.

  Unfortunately, I made a courageous decision and tried to do exactly that.

  [Control Panel > display > screen resolution]

  [- Multiple views: extend these screens]

  Now, when I plug in two additional screens, all 3 are black screens.

  Very well.

  After consultation with the help, the majority of the replies revolves around changing the settings to the way they were (go to the menu of xyz and adjust in the opposite direction).

  However, it seems that in this situation even if you, say, connect one of the additional screens in clear, once you plug in time he returned to a "profile 3 screen", develop screens at once and the problem persists.

  So, I'm looking to reset my display in all settings.

  Is there a way to do this outside of a system restore?

  Thank you!

  Hello Alden,

  Thank you for visiting Microsoft Community.

  According to the description you want to reset the display settings on the system.

  Certainly, I understand your concern.

  I suggest you check the suggestions in the following Microsoft Community links below and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/how-do-i-reset-default-display-settings/f5392f31-10ed-407D-ba5a-5b065e3b8663

  Note:  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  The steps above applies both to Windows 7.

  For reference:

  We may also refer to the article below and check if that helps.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• How can I get my computer to connect to the internet evey time that I boot it up without having to reset the network card?

  Whenever I start my computer I have to reset the network adapter or get new settings of IP so he can connect to the internet. When that I starts it connects to a LAN only.  I have cable internet. My modem works fine. I have Windows Vista and Internet Explorer 8.

  Hello

  See the following link, it worked for me. I'm sure that it will work for you as well.

  http://www.Vistax64.com/Vista-General/151727-connect-Internet-startup.html