How to reset the on the Toshiba laptop fingerprint reader?

My fingerprint reader does not recognise my fingerprint. How can I reset, because I forgot my password?

> How can I reset, because I forgot my password?
Sorry, but if this can be reset so easy then every laptop stolen can be reset.
We write here on the protection of the laptop or what? :)

Tags: Toshiba

Similar Questions

  • Need to reset the Protector Suite fingerprint reader - Satellite M105-S3084

    My wife was interested in using the Protector Suite fingerprint reader that came on his Toshiba Satellite M105 S3084.
    She tried to register, but it looks like someone has already registered and need of the original candidate of fingerprint or password.

    I have extracted a confession from my teenage daughter, but he does not recognize her fingerprints, and she can not remember the password.
    She thinks about one of his friends were playing with it (it was a year ago).

    Anyway, we can reset everything, so that my wife can do it again?

    Thanks in advance.

    EK

    Hello

    Seems the same problem I have... Following error message box appread.

    <>
    Operation failed. Tempplates duplicate already exists >

    I used to use VISTA and I have registed finger the index print until yesterday. I deleted all the partition and then installed Windows 7 and installed all the drivers. I could all registry middle finger, but I was no longer able to index regisger.

    Another reason, I created a new windows profile and delete the old profile of windows. After that, I could not record not only the index, but also major as well. I guess these finger print data stored outside the windows user profile, but I can't find where it is. How I remove registerd information?

    Feature: Portage R600 PPR61E 11b

    Please adivese.
    Mabo

    Post edited by: mabo

  • How to reset the sensor of fingerprint on Portege R700-174?

    Hello!

    my "problem":

    on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

    all systems are protected by password and fingerprints.

    also the win10-test system (for test prints digital-utility in win10)

    now, I deleted an old generation of win10 and do a new install with the latest version

    Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
    to be entered for the new win10 (or any other system)

    My question

    is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
    Fingerprints for this system, which does not exist anymore on my portege?

    Thanks for the tips

    Kurt

    The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
    http://www.MyToshiba.com.au/support/items/FAQ/386

    In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

    See also another thread:
    https://Forum.Toshiba.EU/showthread.php?75917

  • How to reset the password forgot Windows user account

    I need Toshiba password reset! How can I reset Toshiba laptop? I know you if you help me Toshiba password recovery, etc. Well well, so often to address these issues in our lives. Today, we share a few ways to reset the password of Toshiba.

    Solution1: Toshiba recovery disks help reset lost password

    It only works if we have created the CD or recovery discs before that we have forgotten the password. The next appearing is the steps to reset the Toshiba Windows 7 recovery disk:
    a. start the PC, log on to Windows 7 and insert a USB flash drive in the driver.
    b. start-> Control Panel-> user accounts and of the safety of the family->-> create a user accounts password reset disk.
    c. in the Welcome screen click Next and select the inserted USB, click Next.
    d. Enter the password in the password field and click Next. When the progress indicator displays 100% complete, click Finish to exit. Remove the driver USB of PC.
    The method is similar to create a Toshiba restore CD. Now the password of Toshiba Windows 7 recovery disk is ok. Put it in a safe place for people can use to reset your password.
    Steps to recover the password with the created password reset disk Toshiba:
    e. click on reset password in Windows 7 logon window.
    f. Insert the USB Toshiba Recovery disk created in the USB driver interface, and then click Reset password' to open the password reset Wizard. Click next to continue.
    g. Choose this Toshiba USB drive recovery in the drop-down list. Click next to continue.
    h. enter a new password and re-enter a second time to confirm. Click next and finish to close the wizard.

    Option2: Reset Toshiba laptop for accounts with administrator rights

    If there is default or built-in Administrator account or other accounts with rights and administrator privileges, we can use it to Toshiba bypass password. Take example of Toshiba XP Recovery:
    System A. Boot mode safe mode by pressing F8 when PC stars.
    B. PC access by the available account with administrator rights and of privileges.
    C. start - users and groups lusrmgr.msc in the search ENTRY - local users and groups - box choose users.
    D. make a right-click the account with password unlocked, select set the password and enter and confirm the new password.

    Solution3: Toshiba Reset password with the ISO image file burn

    We can burn .iso on a bootable USB stick or a CD/DVD disc image file and reset the forgotten password quickly and easily. Take one of the most popular tool to reset the Windows Ainorsoft Windows Password Recovery password as an example:
    a. download the program from an accessible PC;
    b. burn the file .iso on a blank CD/DVD or USB drive.
    c. work around the lost password of Toshiba with the CD/DVD on the PC locked.

    Things will be difficult if we know the methods of Toshiba pass reset once we forgot password for Toshiba laptop! Be sure to share them with your friends!

    Thanks for sharing this, but we always talk about password of Toshiba, it won't and I think this might be a bit confusing, it is of a workaround for the windows user account password.

    As much as I know there is no password defined by Toshiba.

    The user can define the user account password in windows if necessary so that this workaround solution describes how to remove a user account Windows password that is common to all computers with the preinstalled Windows operating system.

    However, thanks for posting ;)

  • Re: How to reset the password on the logon screen - Satellite A300?

    How to reset the password on the logon screen?

    I can not access the installation of the establishment or BIOS because I can't pass this screen. Enter something wrong 3 times turns off the computer. I do not have the current password and I don't know what kind of password is and why it s asking one as soon as I turn it on.

    How can I solve this problem?

    You can not fix it. You can only disable it, but to do this, correct password must be known to you.
    As many times before in this forum we have already discussed on this topic.

    Password is very important security feature and we cannot advise how to bypass or remove passwords on the public forum. In other words, each stolen notebook protected by password will be easy to start and access to the recorded data will be easy.

    What is your laptop? You may have purchased this used an and now it is blocked by password?

  • How to reset the form filling on windows 7

    He worked that suddenly stopped working. How to reset the function so it will work again? I have windows 7 on a new laptop

    See:

    • Tools > Options > privacy > History: "Remember search and form history" [X]
  • Reset the computer laptop "VPCEB32FM" back to factory settings

    Sony technician Hi I wanted to know how to reset my "VPCEB32FM' back of laptop for making adjustment. When I bought the laptop it came with burnt copy of recovery disc and no manual on how to get it back. also sometimes when I watch a clip on the internet this fuzzy blocks shadow green me to see, could you help me fix this too and also recently the half of the screen goes black for a few seconds. should I send my laptop to the manufacturer for the best solution.
    Thank you.
    Abdulmalik

    Hello Abdulmalik,
    Welcome to the Forums of Discussion of the user.
    If you are affected by artefacts of green or lines, it is true, it may be hardware related, however, before the search service twords or wipe your entire disk, does occur offline too? or only when streaming. Try to play a DVD from your home library. Do you feel the green bars or blurred image?

    If you only experience this problem when viewing online, connect with LAN cable instead of wireless and see if the distortion disappears, you may experience buffering problems. If all the videos online or off is cause your graphics problems, make sure your CPU fan is clean.

    If you are still not sure to contact technical support to guide you through some deeper troubleshooting,.
    http://www.sonyrepairservices.com

    P.S. If you want to restore your computer to factory here conditions are the steps to do so.
    Press the Assist button on your keyboard in windows.
    VAIO care launch
    Select recovery and restore
    Choose computer recover to restore your computer to its out of box factory State.
    (be sure to save and back up important files before doing this!)

  • How to reset the BIOS on Satellite A100-237 password?

    Hi, guys.

    Suddenly, I ended up having a bios password problem without putting a whole. I can´t seem to start my computer A100-237, because he wants a password just after I ve it starts.

    Unfortunately I don't have haven´t had the time to go to the nearest Service partner because it is 400km away. Can someone help me solve the problem (I ve read about KeyDisk, but I need a disk to be able to use it and I simply Dona´t have a).

    Maybe I can use a kind of bootable CD to reset the password or something else?

    Thank´s in advance for your help!

    No, no, no you can not make yourself the BIOS password is not easy to remove on the desktop PC by removing the RTC battery.
    Something like that is not possible on the Toshiba laptop and can damage the Board.

    The only way to remove the BIOS password is in contact with the ASP in your country.
    I think that it of a security option because before you remove the BIOS password, you have to show the invoice or delivery note.

  • How to reset the forgotten administrator password

    How to reset the forgotten administrator password

    You forgot your password

    Lion or later version

    Reset a password in Mac OS X 10.7 Lion

    OS X Lion mountain - reset a login password,

    OS X Mavericks-solve password problems,.

    OS X Lion-Apple ID can be used to reset your password for the user account.

    For Snow Leopard and earlier with installer DVD

    Mac OS X 10.6 - If you forgot your administrator password.

    OS X - change or reset a password for account (Snow Leopard or earlier version).

    For Snow Leopard and previous without installer DVD

    How to reset your Mac OS X password without an installation disk. MacYourself

    Reset password for OS X without an OS X CD - Tech News and Analysis

    How to create a new account administrator - Mac Hack

  • How to reset the lost password admin

    How to reset the password for the admin on my mac?

    Restart your mac and hold ⌘R immediately. Keep until the Apple Logo appears. This may take some time for your mac start. Once this is the case, select Terminal in utilities > Terminal to the Menu bar above. Once the terminal appears, type

    ResetPassword

    A password reset Wizard will appear. Select the appropriate account, and enter the new password. Then tap Save. Then, click the apple logo in the corner, and tap on choose Startup disk. Click on Macintosh HD and press ENTER.

    You should now be able to use your new admin password.

    Good luck.

  • I'm locked out of my new iPad and I don't own a computer. How to reset the password

    IM locked out of my new iPad. How to reset the password with a computer?

    You do not have. You must either find a friend or a member of the family with a computer, you can use or make an appointment at the Genius Bar at your local Apple store.

  • How to reset the clock?

    New on this computer, may not know how to reset the clock... not come to book with this refurbished.

    Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

  • How to reset the password forgotten for the Airport express

    I hid says on my airport express and I don't remember the password for it. How to reset the password

    If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.

    AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.

    If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express

    Click Edit in the window that appears

    Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.

    Click Show passwords and you will see your forgotten password

    If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.

    Airport - access to forgotten passwords

  • C5150 - how to reset the printer to clear the network password?

    I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

    I guess that you did not read my * last * post here, which has been designed for you. in any case...

    PhotoSmart C5100
    -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
    -Press "OK".
    Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)

    TO MAKE RESET "Half full" in the HELP MENU:

    -Use the > to scroll to 'Resets the Menu' and press 'OK '.
    -Put "Full Semi" highlight Reset and press 'OK '.
    -Unit will shut off by itself in 3-5 seconds
    -Power and then turn it back on by button / stop
    -Leave the print alignment page - do NOT cancel
    -Allow to go through maintenance and Photosmart screen (normal)

  • ProBook 4320 s: how to reset the bios password

    Hi guys, I Don t know if this thread is in the right place, if not mods can move.

    I need to know how to reset the password of the bios for HP ProBook 4320 s.

    @Spaha

    I couldn't find one in the warehouse so I did not test this.

    Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

    http://welcome.HP.com/country/W1/en/contact_us.html

    When you talk to the HP rep ask them to increase your service request.

    Or download these files.

    https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

    Insert a clean USB flash drive.

    Then run USB Image tool.

    Choose the flash drive, and then click RESTORE.

    Remove the flash drive after the restore.

    Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

    At C:\OUTPUT, type CD... "And then press ENTER.

    HPBR of type "and then press ENTER.

    First thing is to save your settings.

    Select 3 # re-program.

    Press "S" to save the system information.

    Type HPBR and press ENTER.

    Given that your model is not listed, select "SHOTGUN".

    After the reboot, repeat 'SHOTGUN' a second time.

    I would like to know the result, so I can update my list.

    Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

    http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

    Additional help here.

    http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

Maybe you are looking for