How to restart the Satellite A100 after update BIOS to version 6.00?

Similar Questions

• Impossible to restart the Satellite C after update critical intsalaltion

  Help!

  Whenever the computer install the critical updates that reboot the system.

  I do restorations at that time and now I can not get the computer boot at all.
  I go as far as the loading of windows then just a black screen with a cursor.

  > black screen with a cursor.

  Do you mean the blinking cursor appears in the upper left corner?
  This looks like a HARD drive problem.

  You are able to access the BIOS? Check this pressing F2 while turning on the unit.
  Check if the HARD drive is recognized in BIOS. (first page of BIOS must contain details of the HARD drive)

  By the way: what model of laptop and what system you have?

• How to make the paper dirty after update links?

  Hello

  I use the code to update the link between resources by providing new URI below. The relationship between resources are updated, but the document is not become dirty.

  InterfacePtr < ICommand > updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));)
  UpdateCmdData InterfacePtr < ILinkResourceStateUpdateCmdData > (updateCmd, UseDefaultIID());

  updateCmdData-> SetResource (REF.) GetUID());
  updateCmdData-> SetDatabase (REF.) GetDataBase());
  updateCmdData-> SetNotify (true);
  updateCmdData-> SetUpdateAction (ILinkResourceStateUpdateCmdData::kUpdateURI);
  updateCmdData-> SetURI (newURI);
  updateCmd-> SetUndoability (ICommand::kRegularUndo);
  CmdUtils::ProcessCommand (updateCmd);

  How to make the paper dirty after update resources?

  Thank you

  Use PreDirty(); before your change.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• How to set the Satellite A100-596 to factory without Recovery DVD settings

  I gave my young niece of my old laptop A100-596 for Christmas.
  It worked perfectly on Christmas Eve I packed it upward, in packing of origin, but at the time my niece connected on it has lost 40 GB of data among the drives C and E - everything E drive and the dvd drive had stopped working!

  Now, no one has any explanation for what is happening, nor any reason why a laptop that has performed flawlessly for 18 months would suddenly lose 3/4 of the data on it, but whatever!

  So now I want to restore it to factory, but without a job settings dvd, how? I have all disks involved in perfect condition!
  In addition, I want to fool proof so it can be retrieved in case the person or nothing damaged, this time he cannot repeat the action.

  So I think that if I partition the hard drive so that the recovery of files is accessible by me with a password, which I will NOT share with any of the children, if they bumble once again, then I will be able to recover.

  Moreover, even restoring the system files have disappeared, so I can't even it roll back to a working condition!

  Any advice?

  Hello

  You wrote so much and I think it's the best we descuss all questions slowly.

  I don't know what you mean under non-working DVDs. Is the drive defective optical drive or media DVD is not readable?

  Anyway, the fact is that if you want to have the factory again settings you must install operating system using Toshiba DVD recovery. If you don't have it you can do clean OS installation using the Microsoft DVD facilities. All the necessary drivers, tools and utilities are available on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  When you use recovery media Toshiba HARD whole disc will be erased. Absolutely everything. All data and partitions.
  What you want to do with recovering data unfortunately will not work. You cannot copy the recovery image and start it from the other partitions. Not on Satellite A100.

  On new A300, something like this is possible because the recovery image is stored on the second partition in folder HDDRecovery.

  If you have any other questions please let us know.

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Re: Lost - recovery disc how to recover the satellite A100-649 without a disk?

  Can Hi, please someone help? We have lost the disk and need to retrieve Windows on laptop Satellite A100-649.

  Thank you!
  Maggie

  Ilay is right; recovery for A100 disk can be more pronounced due to the age of s for laptop.

  Do as described by Ilay. use a Microsoft disc to install Windows System. The drivers are available for download from the Toshiba driver page.

• How to restart the Satellite 5200 801 without using the recovery disk?

  Hello
  I haven't used my Satellite 5200 801 for awhile and now it does not start. That's what I have on the black screen:

  Intel® Boot Agent Version 4.1.04
  Copyright © 1997-2002, Intel Corporation
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press a key when tready.

  I have the product recovery disc, but which will erase all existing data and rebuild. Is there a way to boot my PC without the use of the recovery disk?

  Thanks for any help.

  > PXE - E61: Media test failure, check cable of

  This message means that laptop tried to boot from LAN.
  Given that this was not possible the PXE - E61: Media test failure, check cable appeared

  I guess that the HARD drive is defect and therefore, the laptop won't boot from the internal HARD drive.
  In this case also your internal data on the HARD disk are lost.

  But to be100% sure that you can remove the laptop HARD drive, could use a drive enclosure HARD 2.5 to connect the HARD drive to another computer just to check if you would be able to access data on the HARD drive

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Satellite U400 - after update BIOS lighting lights

  Since the update the BIOS on my U400-15E (Vista 32), lighting of the multimedia keys, touchpad always turn after the restart, recovery from the sleep or Hibernate. Touch the illuminance on the off button once does that second touch them will turn off until the next reboot.

  Illumination is disabled in the configuration of the bios and also through HWsetup. After reboot/wake up, without touching the illumination button, accessing the illumination in HWSetup tab / illumination is shown as turned off even if it's on. Touch the power button can toggle illumination to without changing the real light on keyboard. Next key activates / deactivates them both off.

  This isn't a pain important but very frustrating. Any ideas?

  Hello

  A friend of mine had a similar problem with the buttons of the illumination and the reason was an update of Windows or software that is not compatible.
  Anyway, he did also reinstall the VAP and updated the BIOS but no luck. At the end of the story he reinstalled Windows using recovery disc HARD option and everything worked very well.

  Maybe a new facility with Toshiba Recovery disk or HARD drive recovery option can help you, buddy.

  Good luck!

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• Satellite P750 - after update BIOS CPU fan runs faster

  Hi all

  On my Satellite P750 (PSAY3A - 02L 001)

  Since I've updated my BIOS to version 2.40, I noticed that the CPU fan runs much faster then normal.

  Even more, when I go in options inside BIOS configuration, saving it comes up with "an invalid entry.

  Has anyone experienced this problem? Know a way to solve this problem?

  In General, old BIOS is not available when one is offered on Toshiba new download page.
  If you have older version of BIOS try to contact the nearest Toshiba service provider and ask for help. They have access to the database of Toshiba and can get the ld for you version.

  By the way: have you tried to change the power settings for the cooling method and less upgraded?
  This should reduce the activity of fan cooling.

• Satellite L300 - after update BIOS BSOD appears

  Hello world

  I have a question about it. I have a Toshiba L300 with Intel GM965 chipset. I've been works very well with this laptop after using the Bios v1.40.

  However, recently, after an upgrade of the Bios to v1.50, I started to get the BSOD (quite often) in Vista that I had in v1.30 bios.

  If you have this problem and find the solution somewhere, please let me know. Much appreciate.

  Moreover, there are some problems with BSOD caused by the chipset GM965 reviewed on the site Internet of Dell and Intel. Most people say it's because the Vbios (video bios). The fact that after upgrading my bios to 1.50, the Vbios from my toshiba is always (most recent intel is 1572) 1436.

  If you have a newer version of the vbios, please let me know when you bought your laptop. Much appreciate.

  Here is an exchange of views on Intel and Dell website:
  http://software.Intel.com/en-us/forums/user-community-for-Intel-graphics-technology/topic/59127
  http://software.Intel.com/en-us/forums/user-community-for-Intel-graphics-technology/topic/61093/

  Moreover, for those who cannot upgrade the driver Intel site, please uninstall the previous driver and install the new driver of the installation file (or do it manually). Contact me for more details if you need.

  I'm looking forward to having good and clear on your part answers. I don't like the answers- and made-up. (I'm not a fool).

  Thank you

  Hello

  I'm still looking for answers about Vbios. Hope can hear someone here.

  In the meantime, I would like to use this thread to discuss chipset GM965 and question, you can meet with her. Obviously, the driver supported by Toshiba is an older version and is missing many features. Some people say it is not safe to use other pilots, but it is false. There is nothing wrong if you use the original equipment manufacturers, as they know more of 3 companies.

  Intel has released a new chipset GM965 - X 3100 driver to:

  Download: http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2800
  Covering memo: http://downloadmirror.intel.com/17122/eng/relnotes_winvista64_gfx.htm

  with many correction of bugs (including for the extended monitors).

  To get the best performance new driver. You must uninstall the current driver on your machine manually from the Device Manager. You can then run the whole upward.

  Don't forget to add a light T & L SW for some software to improve their performance. (Look for how to improve x 3100 perforamce on this site support or the answer that and I'll show you how). For x 3100, SW mode will allow you to have some executives rate more and you can play your games as well as make your graphic works.

  Kind regards.

  Post edited by: anhchuong

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• How to set the default browser after update 35.0

  I've just updated to version 35.0 today. Now, every time I restart my browser that asks me to make Firefox the default browser. I've always said yes and check the box to remember. It does not work. Research help and did what was told to go into Control Panel, then programs and by setting the default value for it. That no longer works. I've never had this problem before. I'm at a loss to know what to do. Any suggestions would be greatly appreciated. Thank you.

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox