How to restore the days mulitple backup in a single pass

Similar Questions

• How to restore the Rman incremental level 0 backup if the SID is different?

  Hi Experts,
  I had a little problem with restore rman backup of level 0. I have backup rman for oracle 11.2.0.1.0 - 64 bit and restore the server to Test 11.2.0.1.0 - 64 bit.
  
  Problem:
  Sid = prd production server
  Sid = prderp test server
  
  Operating system is Oracle linux 5 on both servers.
  
  How to restore Rman if the SID is different?

  Hello

  Refer to this http://shivanandarao.wordpress.com/2012/04/19/duplicating-primary-database-to-a-new-host-without-connecting-to-the-primary-database-in-oracle-10g11g/

  You need to restore it under the same name as you have in the production and later change the dbname using the NEST.

  If you don't want to go with this method, then I suggest you to go with the method of double RMAN.

  http://www.Oracle-base.com/articles/11g/duplicate-database-using-RMAN-11gr2.php
  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmdupdb.htm

  rman target sys/@prod auxiliary sys/@tst
  RMAN>duplicate target database to 'prderp' nofilenamecheck;
  

  Please close this Re: how to restore the Rman backup if the SID is different? wire by marking as replied.

• How to restore the last backup system good

  All the system fonts and icons have been changed to large size.  I'm unable to locate the area where I can restore the last good record.  I need to go back to the system default values that were last saved on 5 July.  I don't remember how to do this.  I could do it before, but can't remember where I went to get there.  In addition to once, I installed a game that when close or uninstalled left all things very large sizes.  How to restore the system to its original size?

  try to start in safe mode by clicking the f8 during the startup key...

  http://www.Google.com/search?SourceID=navclient&AQ=0&OQ=boot+XP+SA&ie=UTF-8&rlz=1T4ACEW_enUS421US421&q=boot+XP+safe+mode

  then run a system restore point by clicking Start > all programs > Accessories > system tools > system restore.

  http://support.Microsoft.com/kb/306084

• How to restore the refresh/stop button?

  I have my perfectly configured browser buttons I would like it. I don't need someone to another deletion or moving them where they feel they are in a better place.

  How to restore the refresh/stop button? Yes, I update it in the address bar. I want it on the left, next to the button at home where he has been for 10 years.

  Chrome allows me to set the button where I want. The latest version of Firefox did too.

  Thank you. It works almost, installation of two plugins to restore my settings to normal. Unfortunately, my understanding of button is:

  Back/Forward. Home page | Refresh/Stop

  and has been for a long time. I can't move the previous/next buttons. If my muscle memory is defined, and every time I hit the back button, I have to stop and think that it is now.

  It's the same thing that I don't like IE.

  Consider me a convert to Chrome, guys. Now I have to remember to click on the eye of the Rainbow and not the orange Fox - but at least I only will once per day.

• How to restore the default Firefox theme to address original?

  The new Firefox provides a map of the world as its default theme. I prefer the former one - Firefox itself!
  How to restore the original default theme? Can anyone help? See you soon

  Hello jaston25, if you are referring to the current design of the default home page (which is not a topic in itself), then it's just a temporary these days celebrating the release of the new firefox and we want that mozilla web promotion campaign. This will change the appearance of normal firefox after some time...

• ALPS pointing device - how to restore the scroll function

  Until a few days before, my mousepad has allowed me to scroll. I tried looking at the settings in the control panel / mouse, but the options have disappeared.

  Is this a driver problem? If so, should which driver I download and where from?

  The current driver is:
  V5.3.203.18
  and was created 17/07/2003

  If it's not a driver problem, anyone have any suggestions on how to restore the scrolling feature?

  Thanks a lot :)

  I put t really understand what the problem is here. As far as I know, the mouse settings cannot disappear so easy. In any case try to roll back OS to an earlier time using System Restore tool. Maybe this option will be there again.

• Re: Satellite A300 - how to restore the original condition?

  Hello

  My computer freezes for a second or 2 from time to time and Toshiba support told me it might be a software problem. I don't think, because he began the day I bought the laptop and the display driver keeps on the work stoppage, but because I said that if it's a software problem.
  I would have to pay for it, I want to try everything before sending it for repair. This is why I would like to restore my Satellite in its original state as he was just at the moment where I bought it.

  So basically I have 2 questions:

  1 - does anyone have any idea why it keeps freezing on me? And what I should try to do to fix it?
  2. can someone tell me how to restore the laptop to its original state?

  Thank you very much Dina

  Hello

  To determine if it of a software problem or not, you need to restore the factory setting and if it doesn't work you can go to an authorized service provider. They can repair the laptop for you.

  The factory settings can be restored with the Toshiba recovery disc. I guess that your laptop has been delivered with Windows Vista, if you have options to restore factory settings: the Toshiba disk recovery or HARD drive recovery service.

  HARD drive recovery function formats the first partition of your laptop and install Vista again with all the drivers and tools of Toshiba. It is an image that is stored on the second partition of HARD drive in the folder HDDRecovery.
  If you go into the advanced with F8 boot menu after you start the computer, you can start this feature of Toshiba. And then select Repair my computer and some Windows files will be loaded. Then, you can choose the function to drive HARD Toshiba Recovery and follow the instructions on the screen.

  The Toshiba Recovery disk, you must create first, or have you done this yet? Normally, you get a reminder of recovery message after the first start of the laptop that you must burn this disc. Therefore, you must the preinstalled Toshiba recovery disc creator and the image in the folder in HARD drive recovery will be burned on the disc. Then you have a startup disk that can restore the factory settings and HARD whole disc formats then back up your data first!
  The recovery disk is necessary if you have a new HDD or Windows start doesn t. Otherwise, you can use HARD drive recovery.

  I hope I could help a bit and now you understand how to restore the factory settings.
  If you have any other questions, please let us know! :)

  Good bye

• How to restore the factory its and 2004 ibm netvista

  How to restore the factory its and 2004 ibm netvista

  Hello

  I suggest you contact your computer manufacturer (IBM) support site, about the factory restore.

  http://www-947.IBM.com/support/entry/portal/overview

  Note: make sure you take the backup of any important data before you perform the restore to factory on the computer.

• How to restore the old user profile

  I wanted to access some downloaded files that was stored in a temp folder. I did have access to this folder so I changed my folder option to be able to view hidden directories and files. He said that I had to be an administrator to do and I said OK. He then proceeds to change the attributes on thousands of files. In the end, I got is more access to my file and the original files, I became a new person, so to speak. I can manually view my old records, but I want to restore my old user profile, because this new profile is created a lot of problems with previously installed programs. I have two NTUSER. DAT files in my user C:\User\John folder. The dates are when the computer has been initially implemented 16/08/2012 and when the profile changes yesterday 07/02/2013. How to restore the old profile (from 16/08/2012)?

  Thank you

  Johnny

  Hi Johnny,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with the restoration of the old user profile.

  1 have been connected as a standard user?

  2. What are thousands of files you're talking about if you want to have access to the temporary folder?

  This problem can occur because of corruption of the user profile.

  Method 1: delete the new NTUSER. DAT folder and check if it helps.

  Method 2: Perform the System Restore to an earlier date and check if it helps.

  System restore

  Answer to us if you are having problems with the user profile or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• How to restore the built in application of new? Unfortunately I deleted

  How to restore the built in application of new? Unfortunately I deleted

  Hello

  It is on the App Store.

  Delete apps Apple integrated from the home screen on your device iOS with iOS 10 - Apple Support

• How to restore the calculator application to drag it to the top of the screen to control

  Can how I restore the calculator to drag it to the top of the screen to control center? It seems to have been removed from the bottom row? Thank you

  Are - what you got to remove the calculator of your applications on the phone? You can find the calculator on the phone itself? If you find it, then try a reset. Hold down the home and sleep/wake together until you see the Apple logo and then release. The phone will restart. There are no settings to change what appears on the display. See if the reset solves your problem.

  EDIT: what exactly you see in the Control Center? If you see only controls the music, then drag to the right to see the rest of the access to the control center.

• I have accidentally moved my images directory in the Finder. He disappeared, but when I run iPhoto - pictures are there. How to restore the directory?

  In the Finder, I tried to copy my photos on a USB directory. I dragged rather than copy it. Now this isn't on my USB but it is not visible in the Finder. When I run iPhoto I can see the pictures, but I can't access it now as single files. How to restore the directory of pictures or find all my photo files.

  IM El Capitan 10.11.6 running.

  Thank you

  Stem

  Move it to where it belongs - in your folder. If you don't know where it is so, look for using Spotlight.

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• iTunes has changed the order of songs on an album. How to restore the original order?

  I have a classic album. iTunes has changed the order of the songs. How to restore the original order?

  Order of songs is controlled by the number of drive and the beaches. Set them accordingly.

  TT2

• How to restore the FEATURE NEW TAB after a 3rd party took over?

  I downloaded a program, and as a result my tabs novelty was changed to a 3rd party search page. (Funmoods.com)

  How to restore the value default new feature of tabs without losing the information that had been previously saved?

  Figured it out.

  Thanx