How to restore Windows Safe Boot to Normal of startup using the System Configuration?
Hi Muhummad,
Please contact Microsoft Community Forum.
I understand that you are unable to start your computer in normal mode.
I will certainly help you in this matter.
Please follow the methods.
Method 1:
Please complete the restore of the system of the environment of Windows Recovery for the date and time when the computer was working fine.
See the link.
What are the system recovery options in Windows Vista?
Method 2:
Follow the steps in the link.
http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
NOTE: a custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies
In case you have questions about the Windows operating system, please post on the Forum of the Microsoft community.
Tags: Windows
Similar Questions
-
Do installed Windows updates remain intact after back by using the system restore?
I installed the Windows updates at the same time, I've updated my antivirus software, and now when I try to delete a message from Inbox in Outlook 2007 by using the DELETE key on my keyboard, Outlook crashes. I am trying to determine if this problem was caused by the updates of Windows/Outlook or the update of the antivirus software. I did a system restore to an earlier date to do all the updates and the Outlook/remove key question has disappeared. Even though I know that system restore has removed the antivirus update, I don't know if he removed the updates of Windows/Outlook. Just try to understand that you caused the problem key to delete. Strange problem, huh?
Thank you!!
Take a look at the last picture on this page - http://taurarian.mvps.org/Screenshots_Vista/before_and_after.html
Notice down at the bottom of the image on the left is
See also
Security Center
Updates installedClick the installed updates
TaurArian [MVP] 2005-2010 - Update Services
-
"This copy of Windows is not genuine" message at startup of the system
Original title: tell my windows is not good.
When I boot microsoft says that my windows vista is not valid. I have an emachines, disc of microsoft windows vista home basic 32-bit operating systems. Ive been running this OS disks for two months, no problems and now I can't get online with limited access, help...
Hi ricky,.
We recommend that you contact Microsoft customer services and get a new product key (you may have to pay to get a new key).
See How and when to contact Microsoft and support Customer ServiceSee also How to activate Windows Vista
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to restore Windows XP?
I have lost my Windows XP Home Edition operating system, my Compaq computer came with it, without an installed drive. I contacted Best Buy, they referred me to the HP. HP told me that they didn't have a backup, and told me to contact Microsoft. I have a sticker with the product key on the computer. How to restore Windows XP?
Hello
Your product key is still valid, but Windows XP is no longer supported. Once more, you can check with HP and see if they can provide you with the CD. Microsoft is not more sales of Windows XP operating system.
Hope this information helps.
-
How to restore Windows Vista to how it was this morning?
original title: how to restore windows
Hello
I installed windows vista ultimate on my desktop xps1 and and want to go back to the way the system was this morning and the needs of hep to how.
Note: The system was purchased with Home pemium then I upgraded to ultimate using a cd in 2009. but some problems recently and I was asked to upgrade or re - install the windows that I tried this morning but many of my programs installed is not there so I want to do back and then try upgrading insteead of custom installation, I did.
all he said it back to step I got it this morning
Hello Jack 76.
"I asked me to upgrade or re - install windows.
There is a big difference between an upgrade and a reinstall.
"How to restore a computer to a previous Windows installation after you install Windows Vista"
http://support.Microsoft.com/kb/933168
As you say that you did a Custom Installation, see if you have a windows.old folder that is available and the formalities required for use according to the instructions above on how to 'dismantling' to an earlier version of the operating system.
If you do not have the above, there is nothing that can be done about it.
-
How to restore Windows 10 Windows 7 [was: how]
How to restore windows 7 Windows 10
Backup your data first, then see http://windows.microsoft.com/en-us/windows-10/going-back-to-windows-7-or-windows-81
-
How to restore Windows 7 default services
Original title: how to restore Windows 7 default services
Help me!!!
Hello
2 methods to reset Services - 1. 2 check them manually. Reinstall Windows (or go back to get out of)
the State of the check box).1 reset Services to default values
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/================================================================
2. replace or go back to out of box state.
You mean reinstall the OS completely? If you have the Windows 7 DVD you can do however
don't forget to completely backup your data off the drive, and you need to reinstall your programs. If you
don't have Windows 7 disks, you can buy them in your machine to cheap system. If you don't like
on existing programs then you can do a complete new installation - just select the format options
which erases the entire disc (This erases all data as well).Some system manufacturers use Partitions of recovery as well as other methods to allow you to return
Back to a completely new installation. So check with your system manufacturer to see what options
you need to do - and certainly do - just a question of the process of the
Manufacturer of the system put in place for you.How can I perform a clean Installation of Windows?
http://pcsupport.about.com/od/OperatingSystems/f/clean-install-Windows.htmHow to do a clean install with Windows 7, this wipes ALL programs and data on
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to do a Custom Installation of Windows 7
http://www.SevenForums.com/tutorials/20146-custom-install-Windows-7-a.htmlHow to do a clean install with a Windows 7 upgrade Version
http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.htmlHow to do a upgrade install Inplace of Vista to Windows 7
http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.htmlInstallation and reinstallation of Windows 7 (upgrade - store programs and data or New Installation)
which removes the)
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html========================================
If you do a repair disk - this helps to repair Windows not re-install.
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html======================================
If necessary:
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How to restore Windows Update on all programs
I accidentally moved Windows Update all the programs to my computer desktop. How can I move it back on all programs? I tried to use the system, but for some reason restore any, it does not even have restore points.
Click the Start button and click Control Panel.
On the right top view
Click small icons
Windows update is listed?
Right click and click on create a shortcut / desktop.
Drag the shortcut to your desktop to the Start button.
then in the list, all programs
Drop it right underneath the Windows media player when a black line appears.
-
How to restore Windows 7 without the CD?
I bought my HP Probook 4530 s, Lincenced windows was already installed in it, but not any CD was givento me. License key is written on computer laptop back. Now that my windows doesn't work well, I want to restore my windows to the factory settings. If anyone can guide me how to restore windows 7 Home Edition to factory settings without using any CD?
Impossible recovery install on one of your partition and you can access it either with tools or when you start your PC, press one of the keys on your keyboard to start the recovery.
I suggest you visit the HP support website:
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?
I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7. Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.
I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.
Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA
OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K
keimanzero,
Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.
Secondly, I suggest that you run the File Checker system while in the same clean boot state.
To run the System File Checker tool, follow these steps:- Click Start and type cmd in the field search programs and files .
- Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.If you are prompted for an administrator password or a confirmation, type your password or click on continue.
- At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:sfc/scannow
When the analysis is complete, test to see if the problems facing the system have been resolved.
If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.
Expert MowGreen Windows IT Pro - consumer safety
-
How to remove McAfee security scran more my boot of the System Configuration.
Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.
Gary
Hello
1. are you able to uninstall successful McAfee software?
2. is there an error message or error code while you uninstall McAfee software?Try the following and see if it helps.
Method 1:
How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783
See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp
Method 2:
Uninstall if you have any program name McAfee Security Scan Plus on your computer.
Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-programSee also:
Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Method 3:
The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.
If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:
Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce
If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder
HKEY_LOCAL_MACHINE startupreg
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
-
I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them that I just want to be able to use the system restore and information system. Thank you
Hello
What is the full and exact error message?
Check if the article below or the thread will help.
How to use restore system with Windows Management Instrumentation in Windows XP
http://support.Microsoft.com/kb/295299
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-WMI-file-is-missing-i-am-running-Windows-XP/86242cad-ee5a-E011-8dfc-68b599b31bf5 -
How to restore a shortcut to folder with its contents after the removal of the trash
How to restore a shortcut to folder with its contents after the deletion of the Recycle Bin in vista
Hello
you deleted the shortcut, not the content; haven't you?
This program recovers deleted data, etc.:
http://www.Piriform.com/Recuva
___________________________________________
Why not just make a new shortcut?
http://www.ehow.com/how_5104544_create-desktop-shortcuts-Windows-Vista.html
How to create Windows Vista desktop shortcuts
-
I chose to try the upgrade of Windows 10 on my laptop primary. Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning. Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems. Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward. After serious soul searching I elected continue to use Windows 7, I don't really like.
That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10. I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.
Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled. The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.
This window doesn't go away even after reboot, and I can not "check for Updates".
Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.
Thank you for any assistance.
By using the system restore before computer restart after updating Windows 10...
Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.
-
Acronis restored Windows XP crashes with BSOD on startup
I tried to restore an image of Windows XP Pro created with Acronis True Image Home on a virtual machine VMWare, using VMWare Player. When I try to boot the system I momentarily get a screen blue, followed by a never-ending cycle of reboots. The same phenomenon occurs in Mode without failure. I used to be able to restore it but we have migrated the installation of a modern system of Levono and is no longer possible to restore on a virtual machine. I guess that there is a problem with the drivers HD in the new system.
Does anyone have any suggestions? Here's my .vmx file:
. Encoding = "windows-1252".
config.version = '8 '.
virtualHW.version = '8 '.
scsi0. Present = 'TRUE '.
memsize = "2048".
IDE1:0. Present = 'TRUE '.
IDE1:0. FileName = 'E: '.
IDE1:0. DeviceType = "cdrom-raw"
floppy0.filetype = 'file '.
floppy0. FileName = "autoinst.flp".
floppy0.clientDevice = "FALSE".
ethernet0. Present = 'TRUE '.
ethernet0. ConnectionType = "nat".
ethernet0.wakeOnPcktRcv = "FALSE".
ethernet0. AddressType = 'generated '.
USB. Present = 'TRUE '.
EHCI. Present = 'TRUE '.
Sound.Present = 'TRUE '.
sound.fileName = "-1".
Sound.AutoDetect = "TRUE".
MKS. Enable3D = 'TRUE '.
Serial0.present = 'TRUE '.
Serial0.FileType = "thinprint".
pciBridge0.present = 'TRUE '.
pciBridge4.present = 'TRUE '.
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = '8 '.
pciBridge5.present = 'TRUE '.
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = '8 '.
pciBridge6.present = 'TRUE '.
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = '8 '.
pciBridge7.present = 'TRUE '.
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = '8 '.
vmci0. Present = 'TRUE '.
hpet0. Present = 'TRUE '.
usb.vbluetooth.startConnected = "FALSE".
buslogic.noDriver = "FALSE".
displayName = "XP Server"
guestOS = "winxppro.
NVRAM = "Server.nvram XP.
virtualHW.productCompatibility = "hosted".
gui.exitOnCLIHLT = "FALSE".
easyInstall.keepFloppy = 'TRUE '.
powerType.powerOff = "hard."
powerType.powerOn = "hard."
powerType.suspend = "hard."
powerType.reset = "hard."
extendedConfigFile = "XP Server.vmxf"
ethernet0.generatedAddress = "00: 0C: 29:84:88:4f.
vmci0.ID = "1099204687".
UUID. Location = "56 4 d 12 ee f6 60 70 7 b - 1e a9 4 c 41 84 88 4f d2".
UUID. BIOS = "56 4 d 12 ee f6 60 70 7 b - 1e a9 4 c 41 84 88 4f d2".
cleanShutdown = 'TRUE '.
Replay.Supported = "FALSE".
Replay.FileName = «»
usb.autoConnect.device0 = ' path: 1/1/0/3 autoclean: 1.
pciBridge0.pciSlotNumber = "17".
pciBridge4.pciSlotNumber = "21".
pciBridge5.pciSlotNumber = "22".
pciBridge6.pciSlotNumber = "23".
pciBridge7.pciSlotNumber = "24".
scsi0.pciSlotNumber = "16".
usb.pciSlotNumber = "32".
ethernet0.pciSlotNumber = "33".
sound.pciSlotNumber = "34".
ehci.pciSlotNumber = "35".
vmci0.pciSlotNumber = '36 '.
USB:1.present = 'TRUE '.
ethernet0.generatedAddressOffset = '0 '.
tools.remindInstall = 'TRUE '.
vmotion.checkpointFBSize = "134217728.
USB:1.speed = '2 '.
USB:1.DeviceType = "hub".
USB:1.port = "1".
USB:1.parent = "-1".
IDE1:0.startConnected = 'TRUE '.
USB. Generic.AutoConnect = "FALSE".
SCSI1. Present = 'TRUE '.
SCSI1:0. Present = 'TRUE '.
SCSI1:0. FileName = 'Server.vmdk of XP.
SCSI1:0. Redo = «»
SCSI1.pciSlotNumber = "37".
scsi0:0. Present = "FALSE".
USB:0. Present = 'TRUE '.
USB:0. DeviceType = 'hidden '.
USB:0.port = "0".
USB:0.parent = "-1".I tried to install the converter VCentre - but it only supports older versions of Acronis.
This is unfortunately true. However, if you first restore the image to a virtual disk using Acronis and then run VMware Converter using the option 'Configure the Machine', the converter must inject the proper drivers.
André
Maybe you are looking for
-
Tecra A9 - what are the changes in the new update of the Bios
Can someone tell me the changes in actually updating of the BIOS v1.70 and the 'old'?And there at - it a PDF file to the outside where I can see the detailed description of the functions of the Bios? Thank you Greetings
-
How can I turn on the lights under speakers on Satellite P100-227?
I have a satellite p100-227 with the orange cover, is the one with the harman kardon speakers! under the speakers there is little light strips that lights blue (at least in the pc world, that they do) someone knows how to turn on these?
-
I'm unable to install updates from Microsoft for Mac Office 2016. It doesn't install automatically updates and when I try to download the installer, even that does not work. Can someone help with this problem?
-
Bought with mspoints Xbox games
If I buy fuzion frenzy on xbox 360 with microsoft points it'll work?
-
I have a HP Pavilion dv5-2134us running Windows 7, 64 bit. In the past, worked the small memory card reader to the front. It does not now. There must be a switch somewhere in the device manager - not to conclude. There must be some downloadable H