How to restrict access to the system.

Similar Questions

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• How to restrict access to the service web application deployed on weblogic for user group only

  I built the web service application in jdevelopler 11.1.1.7. Their security policy applied in the web service of the default Oracle policy which is (policy: Wssp1.2 - 2007-Https-UsernameToken - Plain.xml)

  Now all want to access the web service application must provide the name of user and password in the header section of the SOAP request to meet the requirement of the policy.

  the following steps I'm trying to restrict access to the application of web service with a specific group of users among users of weblogic:

  Connect to the weblogic administration console

  Create user or group of users

  Click on the links of deployments

  Select your web service

  Click the Security tab

  Click the sub-tab political

  Choose your authorization provider in the menu drop-down (looks like by default)

  Choose Add Conditions-> Group-> Type in the name of the Group

  Finishing

  But access is always available for all weblogic users (IE users not in the group specified in the above security configuration). How can I restrict access to only authorized group? Any thing lacking in my approach?

  There is nothing wrong with the steps mentioned in the question. In addition, you must do the following

  At the time of the application deployment with regard to the security part, there is a list in the title of the question (which security template you want to use with this application?)

  You must select (Advanced: use a custom template that you have configured on the page of configuration of the Kingdom) a configuration mentioned in the question will be work

• How to restrict access to the network for customers in the lobby.

  Hello

  How is - this preferable to limit the access of the data ports in the lobby of the company for Internet access only? Although the hosts are not on the field, is it safe to allow them to reach the port of data?

  I suggest setting up a vlan separate for these ports and usig dot1q on trunk this vlan to a DMZ interface dedicated or the subinterface on your firewall with an ACL that only allows access to the internet. That should do the trick.

• How to restrict access to the particular presentation table in a given area?

  My current configuration in the presentation layer is:

  Business generic sale-> field

  -Sales-> presentation Table measures

  -TotalSalesofGoods ->field

  -The costs of the measures -> presentation Table

  -CostOfGoods ->field

  -Customer Dimensions -> presentation Table

  -Items-> field

  I have two built roles, 'ShouldSeeGenericSalesSubjectArea' and 'ShouldSeeCostFields '.

  • Permissions
    • "Domain generic sales."
      • User authenticated-> no access
      • ShouldSeeGenericSalesSubjectArea-> read
      • ShouldSeeCostFields-> default
    • "Measures of sales."
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default
    • "Measures of costs".
      • User authenticated-> no access
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> read
    • "Dimensions of the client".
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default
    • All fields have permissions to:
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default

  Given two users:

  • UserA
    • The user has following roles:
      • ShouldSeeGenericSalesSubjectArea
      • ShouldSeeCostFields
    • The user can see everything except the table of fees
  • UserB
    • The user has following roles:
      • ShouldSeeGenericSalesSubjectArea
    • The user can see everything except the table of fees
  • My ultimate goal is:
    • "ShouldSeeGenericSalesSubjectArea" allows access to see the "generic sales subject area", but does not measure cost
    • "ShouldSeeCostFields' allows you to see the presentation layer of"measures of cost. "
    • Example:
      • UserA from above should see everything (including the "cost measures").
      • UserB above should see everything, except 'measures of cost. "

  I tried several different combinations of levels of authorization without result. From my understanding, Oracle security works by taking the path of any restriction. I do something wrong with my permissions on the presentation layer of "measures of cost? Please let me know if there is anything I can clarify or if you need more information.

  I was able to make it work by giving access to role of cost at the level of the subject area. Then each material is no access on the cost, but access if had the other role.

• How to restrict access to the workstations on the Security Server

  Hello

  I wonder if it is possible to limit access to desktop view to some groups, if the connection is from a security server. To explain it a bit further

  * We have users who access it offices internally to a thin/Zeroclient. They comes to connect to their office pool.

  * Other users have a thick client with client view installed.

  * Others have a laptop and cann access their workstations to "everywhere" with client access or view html

  Only users in the latter group should be able to connect on a security server. Right now anyone who knows the URL of the Security Server can access as long as it has right to your desktop.

  I'm sure that this is possible, but I don't know how...

  Another option is to use the external radius authentication. In this way, that you don't have to have separate categories.

• Restrict access to the Page of the user in the relational database

  I have a relational database with two tables on a common ID field. The user can access all their entries in the child table with simple SQL queries and then select from a list of correspondence which of its documents records in the child table that they wish to change (i.e. ['ID'] ParentTable, ChildTable ['ID'])). Registration is then displayed using $_GET passed through the URL as parameter "recordID". However, when the user is connected and accessing a folder that matches the query, they can then enter another "RecordID" number in the URL and go to any record in the table child whether they are 'owner' of the record or not.
  
  I tried to put a statement of equivalence in the authorization user code to restrict the access to the child records users since ParentTable ['ID'] == ['ID'] ChildTable only when you are connected the user accesses the records they created previously. (In other words, when a user type a different "RecordID" in the URL, the ParentTable ['ID'] and ChildTable ['ID] are not equivalent.) The code that I entered in the authentication of the user generated by DW is as follows:
  
  If ((isset ($HTTP_SESSION_VARS ["MM_Username"]) & & ($row_ParentTable ['ID'] == ['ID'] $row_ChildTable))) {}
  ...
  
  Is still not accessible, even if tests show the ParentTable ['ID'] and ChildTable ['ID'] are not equivalent
  
  Any ideas on how to restrict access to the child records "unknown"? I'm sure it's relatively simple, but I'm having trouble to get through this obstacle.
  
  Thank you

  Thank you, Philo. In fact I got it to work by initializing a session variable of tha parent ID of the table and comparing it to the variable ID of child table, then using a header redirect in case of inequality. Part of my problem was where I put the code in the page. Anyway, it works now. It seems that the answer is always just after you have posted the question.

• How to order or download the system recovery software?

  Hello

  Most HP laptops already have called the program "recovery manager" that is built into the laptop. This allows each user recover the laptop whenever they need to.

  Now, there are some situations where you can not use the program from the desktop or even during the boot.

  If this is the case for you, I'll post here how to order or download the system recovery software.

  This video is very useful for users who cannot access the recovery Manger in windows or during boot.

  I suggest, if you are unable to download the recovery image on a USB drive to call HP @8004746836. Order a recovery through HP disk might cost if you are no longer under warranty.

  THX

  Hope it will be useful.

• IPSEC RA - activate crossed but restrict access to the web

  ASA5520 8.2 (5) 30

  Greetings,

  I have an IPSEC RA strategy that has implemented to tunnel all traffic (no split tunnel) by the ASA (which ends on the external interface).  I need to be able to allow VPN users to access a web page (crossed) thesesame on the external interface.

  ++++++++++++++++++++++++++++++

  Here are the current settings:

  Group Policy Admins L internal

  attributes of Group Policy L_Admins

  value of server WINS 172.16.0.33 172.16.0.9

  value of 172.16.0.33 DNS server 172.16.0.9

  VPN-idle-timeout 60

  VPN-session-timeout 480

  VPN-value filter-admin-l

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.33

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.9

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 172.16.1.4 host

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 welcome 172.16.1.2

  access-list extended l-admin-test-filter permit ip 172.30.4.0 255.255.252.252 10.24.0.0 255.252.0.0

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 the host 172.16.0.233

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelall

  value by default-field IHI.local

  type tunnel-group L_Admins remote access

  attributes global-tunnel-group L_Admins

  address ili_global pool

  PhoneFactor authentication-server-group

  Group Policy - by default-L_Admins

  IPSec-attributes tunnel-group L_Admins

  pre-shared-key *.

  ++++++++++++++++++++++

  Crossed is not currently enabled, so I guess I have to add:

  permit same-security-traffic inter-interface

  and (I guess)

  mask IP local pool l_admins 172.30.4.1 - 172.30.4.2 255.255.255.252

  Global (outside) 1 interface * PAT IP

  NAT (outside) 1 mask 172.30.4.1 - 172.30.4.2 255.255.255.252

  But from there I don't know how to restrict access to a single external IP on the web on port 80.

  Hello

  Enter the correct command to permit traffic and the same interface of leave is

  permit same-security-traffic intra-interface

  The command you posted allow traffic between 2 different interfaces that have the same value of 'security level'

  permit same-security-traffic inter-interface

  What about PAT Dynamics for Internet traffic

  If you have already

  Global 1 interface (outside)

  Then you will need the command "nat" for the VPN pool

  NAT (outside) 1 172.30.4.0 255.255.255.252

  In what concerns the control of Internet traffic, should not be able to simply add this destination IP address to the VPN filter ACL you have ever used? I mean the ACL named "l-admin-test-filter".

  For example

  L-admin-test-filter access list note allow the external server connection

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 80

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 443

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 8080

  -Jouni

• How to restrict access to a single user for a proxy in OSB service

  How to restrict access to a single user for a proxy in OSB service

  A. go to the Proxy Service and click on the Security tab

  B. click on Transport Acess political of control to be edited.

  C. click Add to the terms to restrict users.

  D. in the main list, select the category from the user

  E. give the user name to which you want to give access.

• Restrict access to the Portlet producer

  I want to restrict access to the Portlet producer.
  I mean, it is supposed that there 5 portlets to the producer.
  I want user1 will have access to only 2 portlets and user2 will have access to another 3 portlets.
  
  Could you please suggest how to achieve this type of authorization.
  
  I know everything right and single sign on in WSRP. My hypothesis is to combine these two long I can achieve.
  
  Thank you
  
  Bénédicte

  Ah ok
  something like that then?
  http://eDOCS.BEA.com/WLP/docs102/Federation/chap-entitlements.html

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• in my bar there is always some icons for the programs that I removed. How IRB of icons in the system tray?

  in my bar there is always some icons for the programs that I removed. How IRB of icons in the system tray?

  Hi chris malanda

  You can remove the program from the taskbar and check if that helps. To remove a program pinned to the taskbar, open the jump list for the program, and then click remove this program from the taskbar.

  See the help link - below

  http://Windows.Microsoft.com/en-us/Windows7/pin-a-program-to-the-taskbar

  I hope this helps.

• Restrict access from the view of external endpoint

  Hello world

  I got an interesting question to come today: is it possible to restrict access to the view of physical endpoint?  This client does not support BYOD somehow and provided instead of thin laptops HP for their users access to the view since then at home, via a security gateway.  I know that you can disable the web interface from view completely, but they seek to block connections to nothing but these thin laptops.  Thank you!

  Here's a more recent document - https://www.vmware.com/files/pdf/VMware-View-KioskMode-WP-EN.pdf

• How to restrict access in EDITION of APEX Applications in the same workspace

  Hello
  
  I have a workspace that consist of several say application APPL1, APPL2, APPL3,... etc...
  This workspace has access to several... say developers Developer1, Developer 2, etc...
  
  How can we restrict access in EDITION of Applications for a particular user.
  
  for exp.
  
  Developer1 should be able to access/change only the APPL1 & the APPL2. He should not be able to modify APPL3.
  same way... * Developer 2 * should be able to access/change only APPL3. He should not have editing access to APPL1 & APPL2.
  
  
  Thank you
  Deepak

  Hello

  I think that's not possible. At least I don't have to see how it could be done.

  This is why there are work spaces. You must create a workspace clean to all applications for example.
  Then of course there was maybe still problem with the analysis of access privileges to the schema if for example all 3 applications use the same scheme of analysis.
  You must assign same pattern to all areas of work, and then all of the developers of the workspace that you can change database schema objects.

  BR, Jari