How to run a script for all the images in a folder?

How to run a script for all the images in a folder?

You can assign your script to an action, then use processor by batch or image with the option apply to all subfolders.

Tags: Photoshop

Similar Questions

  • my pc CPU running at 100% for all the programs I opened / what is the problem and how to solve?

    my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?

    Hello

    You did changes to the computer before this problem?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

    I would also refer the below article which may be useful.

    The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
    http://support.Microsoft.com/kb/890582

  • How can I use statistics for all the tables in a schema in SQL Developer? and how long will it take on average?

    Hello

    How can I use statistics for all the tables in a schema in SQL Developer? and how long will it take on average?

    Thank you

    Jay.

    Select the connection and right-click on it and select schema statistics collection

  • How to make a script to resize the image to fit the exact framework?

    Good afternoon

    My friend works on a task to do several images to adapt to the size of the image 500 x 700 px.

    We are working on this script, if she sometimes makes the height above 700 px.

    Can anyone help to change?

    ___

    doc = app.activeDocument;

    doc.changeMode (ChangeMode.RGB);

    var fWidth = 500;

    var fHeight = 700;

    If (doc.width > fWidth, 'px') {}

    doc.resizeImage (UnitValue(fWidth,"px"), null, null, null, ResampleMethod.BICUBIC);

    }

    else {}

    doc.resizeImage (null, UnitValue(fHeight,"px"), null, null, ResampleMethod.BICUBIC);

    }

    ___

    The thing is the need of the image to have a ratio of 5:7 to fit 500px 700px area.  An image can have a width and height of any number of pixels. All a camera will have a width and a height greater than the 700px. If your script above would create a very distorted portraits bouquet close

    Download the package of my action craft he has a script that I wrote for use in actions that make it very easy to do what you want.

    Scripts can be used in actions and actions can be used in scripts.  Photoshop scripts can also be programmed as a Photoshop plug-in.  When a plug-in is saved in action the plug-in saves the setting you used in its dialog box in the action stage. When the Action is played.  The plug-in does not display the dialog instead, it will use the setting saved in step of the action.  No user interaction is required action may be batched.

    Most Photoshop users cannot write scripts, but it have no problem using scripts to write than others.  As Adobe Photomerge, Image Processor, image Fit etc...

    I wrote a plugin script using Adobe adapt design Image that will make the selection of image format while maintaining the orientation of the document.  So if you have a 4:3 camera and a collection of pictures of her you landscape of 4:3 and 3:4 Portraits.  If you use my plugin aspectratioselection script in action and a followed centered 3:2 aspect ration of a culture of image and batch as the action on your images you would be left with landscapes of 3:2 and 2:3 Portraits.  The three step action, that's all you need registration.

    menu stage 1 file > automation > AspectRatioSelection...  In his dialogue game 5 7 central rectangle replace feather selection 0

    menu step 2 Image > Crop

    menu step 3 file > Automate > Fit Image in its width and height 700 px value dialog box

    You wind upward with 700x500px landscapes and portraits of 500x700px.

    I have created at least six of the lately. I use to do slideshows for my various devices.   I put the images I want to use in a folder of image source on my desk and play action creates six slide shows is a slide in a slide show on my desktop folder. In six of the subfolders. The Action is all two steps. The first step is running a script that deletes the folder slide shows.  The second step is a step in Image Processor Pro plugin.  This process, the image source in the slide shows folder file, save six series of jpeg images, it's six subfolders. Galaxy tab display 16:10 sideshow 2560 x 1600 and also as a 3:2 slideshow 2400 x 1600.  Surface Pro 3 sideshow 3.2 2160 x 1440, iPo4 4: slide show of 3:2 960 x 640, HDTV 1920 x 1080 and 4kTV 3840 x 2160. I take a coffee break... While the action runs.

    Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
    Contains

    Example of
    Download

  • Application of labels for all the images in a stack

    Long ago, when I was with Photoshop métadata I found a plug-in that allowed to work with batteries as a unit.

    If I have marked the image of the top of the stack lable has been applied to all the images in the stack; then when I've sorted the images, the battery remained in tact. instead of just the top image, with the label appears. I could also label the top image in a stack with flaga, and for example quickly remove all the image of an 'X '. Oterwise is seems the only option is to open each pile, by Ctrl-clicking on the number in the upper left corner, which opens to the stack; with all selected images, then click on help from stars labels I want to apply to all images in the stack.

    I can't remember where I found that plug-in.  I hope that the guy who wrote it; and all I can remember him is that he is from England, wrote a version of Lr?

    I've never written anything for the elements, Mike, but I'm originally from England. Who get close you? Joke apart, looking for my Syncomatic plugin.

  • Why LR6 displays all the images in a folder?

    I created a folder named "owls". He had 71 images, and all have been displayed by LR. I added 86 images in the folder outside of LR. These images have been copied in other folders. I asked LR to import images into this folder. All new images are grayed out and when I click on the 'owls' LR folder displays only the 71 original. What I am doing wrong?

    motto of Joseph wrote:

    Yes, the images that I moved into the folder "owls" had already been imported to another folder. If I work outside LR I have a picture of the scares of the towers in its original Desert Museum folder as well as in a second case, i.e. "owls".

    This is the prefect reason why keywords should be used to organize rather than records. You can assign two (or a lot more than two, there is no limit) keywords to the photo. It is one of the strengths of Lightroom! There is no need to duplicate the photo so that it can exist in two folders. There are many disadvantages to duplicate photos.

  • How to run this script on all my hosts at the same time?

    Greetings.  I have this script that tells me that the status of the HBA device path (dead, active).  But it takes forever to run on all my guests, as it does every one host at a time.

    How can I get that it is running on all hosts at the same time?

    Use: Get-HBAPathStatus VMHosts *.

    Thank you!

    Function Get-HBAPathStatus ($InputVMHost) {}
    $vmhosts = get-VMHost $InputVMHost | Name sort

    {foreach ($vmhost to $vmhosts)
    Write-Host "* $vmhost."
    Write-Host "Please wait...". Checking the paths... »
    $hbas = get-VMHostHba - VMhost $vmhost
    $pathStatus = $true
    {foreach ($hba to $hbas)
    $scsiluns = get-ScsiLun - Hba $hba
    {foreach ($scsilun to $scsiluns)
    If ($scsilun - not $null) {}
    $paths = get-ScsiLunPath - ScsiLun $scsilun
    {foreach ($path in $paths)
    Write-Host - NoNewline ". »
    if($Path.) State - eq 'Dead') {}
    $pathStatus = $false
    }
    }
    }
    }
    }
    {if ($pathStatus)}
    Write-Host "
    Write-Host "$vmhost is ok" - ForegroundColor "green".
    }
    else {}
    Write-Host "
    Write-Host "$vmhost death paths." - ForegroundColor 'red '.
    }
    }
    }

    Be sure to use the 32-bit version of PowerShell and PowerCLI with the Start-Job cmdlet.

    Labour will fail with the 64-bit version.

    See the thread disable asynchronous paths for more information.

  • How to stop this script goes all the time at startup

    I've installed shockwave and others, and I always have problems with scripting. Start up as I continue to keep the message script takes to long. Starting with this problem takes 10-15 minutes to reslove.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode safe or make changes.

  • Is it possible to copy an AE project with all the images in one folder?

    The new draft should also link to new images. I think that in the first, it is possible with the project manager, but I found a solution for AE.

    I use the CS6 version

    Thank you!!

    Philippe

    File--> project Collect

    Mylenium

  • How do I run a script only if the field is not empty

    How do I run a script only if the field is not empty

    Well well, thanks to you, I had a full date on separate days, the months and the years in different areas. But now, I have a problem, as PDF has several fields calculated with script if you enter the date calculated by all other areas, which have separated and undefinied gives me does not want to put this to not always use this field. I tried to put one conditional if else but I sale. Esto, this is what I'm wearing

    var datesol = event.value;//declaramos the variable

    If (datesol = "") {}

    this.getField('yearsol').value = "";

    this.getField('monthsol').value = "";

    this.getField('daysol').value = ""}

    else {}

    var array_datesol = datesol.split("/"); / / separamos esa con date the split funcio

    this.getField('yearsol').value = array_datesol [2];

    this.getField('monthsol').value = array_datesol [1];

    this.getField('daysol').value = array_datesol [0];

    With what they do not separate them now.

    Help please

    As mentioned, you cannot use

    If (datesol = "")

    because that sets the value of datesol to «» (you will need to double for the comparison operator =)

    If you want to run code only if it is NOT empty, while it takes:

    If (datesol <> "")

  • Need a script to change the password of admin for all the VMs (windows)

    Need a script to change the password of admin for all the VMs (windows)

    Hi LucD,

    Need your help about changing the password to root for Linux VM.

    It throws the following error when I run on Linux VM

    Invoke VMScript: 10/04/2013-16:52:02 Invoke VMScript Could not authenticate with the guest operating system by using the supplied credentials.

    Thank you

    Suresh

  • I'm new in indesign scripting, please tell me how to write a script to get the contents of an XML element and then sort all the content

    I'm new in indesign scripting, please tell me how to write a script to get the contents of an XML element and then sort all the content

    Hello

    Can the code below is useful for you, but I do not know how to sort.

    Change the tag based on your employment application.

  • How to write a script for date get to the Clipboard

    Hi experts,

    How to write a script for date get to the Clipboard.

    the date format will be like this:

    05 - may

    respect of

    John

    Thanks guys, thanks Sanon

    I finally use the .bat doc

    like this:

    @@echo off
    for /f "delims =" % in (' wmic OS Get localdatetime ^ | find ".") "") Set "dt = %% a"
    the value "YYYY = % dt: ~ 0, 4%.
    the value "MM = % dt: ~ 4, 2%.

    If MM % is 01 set MM = January
    If % MM == 02 set MM = February
    If MM % is MM value = March 03
    If MM % is 04 MM value = April
    If MM % is 05 MM value = may
    If MM % is 06 MM value = June
    If MM % == 07 set MM = July
    If MM % is MM value = August 08
    If MM % is MM value = September 09
    If MM % is 10 MM value = October
    If MM % is 11A set MM = November
    If MM % is game MM 12 = December

    the value "DD = % dt: ~ 6, 2%.
    the value "HH = % dt: ~ 8, 2%.
    the value "Min = % dt: ~ 10, 2%.
    Set "s = % dt: ~ 12, 2%.

    Echo DD - MM HH % %% % Min | Clip

    It works

    respect of

    John

  • How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1?

    Hi all

    I am trying to disable some built-in options for all modules as well as all users in paragraph 6.1.1.1.

    How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1.?

    Please help me solve this problem.

    Thank you

    Nefertari

    Thank you Ivy, Yes.

    I made some changes more in environment settings that helped me to turn off the button the user create a user/edit.

    Thank you

    Nefertari

  • I want to add glyphs like ², but for all the numbers. How can I do this?

    I want to add glyphs like ², but for all the numbers. How can I do this?

    Oh cool, I just had to use a different font

Maybe you are looking for