How to run customer and display on the same host server

Similar Questions

• How to run 2 different applications of the same Application Server

  Hello
  
  I would like to know how to run two different applications of the same Application Server with different databases?
  
  We use
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  Oracle Application Server 10g 10.1.2.0.2
  
  Kind regards
  
  Hassan

  You can have as much as you want, just your applications should have different names or URLs and point to a specific database (using data sources).

  Greetings.

• How to run to another domain on the same hosting service

  X

  In fact, it seems to work fine now.

• How to run several programs simultaneously on the same block diagram

  Hi all

  I want to run three instruments simultaneously on the same schema. One is a control position for linear drives, other is an optical micrometer and the third is a digitizer card. When using tabs of the controls, the linear actuator Vi is the only thing that seems to work (confirmation on the front panel) but the optical micrometer show no indication on the front panel, but runs in background. I used a tab control to consume less space on the front panel. Someone can help me solve this problem where I can carry several bolts on a single diagram and could even see on the front panel. I enclose my VI.

  Thanks for the help!

  I can't open your VI, but in general; Either you use a loop with all the instruments in the same loop, or separate loops each with no wires between them that forces the execution order. You have none of this?

  Tab control is purely visual, and has nothing to do with the execution.

  

  /Y

• How to play music and narration at the same time on windows movie maker?

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  =================================
  Simple solution... Publish (save) your project in the
  film format .wmv to a folder on your hard drive.

  Re-import the file .wmv (as a new project) and now
  audio / music will be clear and you can add
  the narration.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to export images and they look the same on all devices (iPhone, mac, desktop computer book)

  Hello

  I have adobe lightroom cc 2016 and I'm having the hardest time export photos, especially those where I use adjustment brushes and have look the same on all devices, my man book retna I will edit to look how I want, but for example when I look at the same image on the desktop mac dessu I can see all the adjustment brushes I used to darken

  on the 2 pictures below

  the first is what I see, its all uniformly dark and when I look on another device, according to me, which is depicted in the second photo

  (I have more exposed the second to show what I mean)

  I do not know what device who's going to be watching this post, but I hope you can help!

  Thank you! don't know what to do

  

  To ensure maximum viewing compatibility make sure you set the colorspace of the export in sRGB as below:

  

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• vsga and vdga on the same host

  Hello

  Is it possible to have different pool created on the same host and have some VM (pools) that use VSGA and other virtual machines (pool) that are using VDGA on the same host?

  Yes it works very well! (Assuming you have at least 2 GPU:s or Board with more then a GPU as a K1 or K2)

  Linjo

• How to share text and image at the same time using Blackberry invocation framework

  Hello

  I need to share the text and its corresponding picture to FB, Twitter and BBM using the framework of invocation of blackberry. No invocation framework support for images and text sharing simultaneously.

  When I use the mime type as text/plain, the url of the image and the text is shared and when it is image/jpeg is used only the image is shared and not the text. Here is the snippet of code used.

  ShareDataTo=function shareTo(key) {
  //shareImage();
  var text ="";
  
  text = itemObject.myName +"\n My Age : Rs."+itemObject.myAge+"\n Address "+itemObject.address+"\n"
  try
  {
  blackberry.invoke.invoke({
  target: key,
  action: "bb.action.SHARE",
  type: "text/plain",
  data:text
  });
  }
  catch(Error)
  {
  //alert('in ShareDataTo error '+ Error);
  }
  }
  

  Help, please

  Kind regards

  Annuk

  This is not currently supported.  Now, you can make a text or an image, but not both.

• DMZ and internal on the same host

  So I have an ESXi 5 host with 4 natachasery (it is a test area) in courses run 4 comments and I wanted to configure 1 Teddy to a demilitarized zone. When I put a vSwitch, the VMkernel default gateway is already point to my internal gateway while the demilitarized zone has a different IP address for the gateway. Is it possible to set up a second default gateway to use for the DMZ network and how it is? Again, this is only a test area with nothing important to this topic. Only to learn.

  Thanks in advance.

  There is not much I can say, it's actually an installation very simple and straight forward. When you create a new vSwitch on the ESXi host with an uplink to the DMZ network, you can deploy virtual machines attached to this vSwitch (its port VM group) in the subnet of the DMZ, as if they were physical systems. The different vSwitches on the ESXi host are not connected to each other somehow. The uplink does not have an IP address, it is only the VM in which the IP parameters must be configured appropriately.

  André

• VM in DMZ and LAN on the same ESXi Server VM

  It is advisable to run two virtual machines on a physical ESXi Server considering only

  a VM THAT is connected to the DMZ (demilitarized zone) and another VM is connected to the local network.

  For example, a virtual machine can be a gateway mail server in the DMZ and

  another VM can be located in LAN mail server.

  ESXi box has multiple network cards, so a single card could be connected to the DMZ and others to the local network.

  Is it dangerous from the point of view of security?

  It becomes really dangerous if you have a virtual machine that is connected to two networks at the same time if not online, there is no way known to cross borders. Other that that, you should be good to go

  Steve Beaver

  VMware communities user moderator

  VMware vExpert 2009

  ====

  Co-author of "VMware ESX Essentials in the data center" virtual

  (ISBN:1420070274) Auerbach

  Come and see my blog: www.theVirtualBlackHole.com

  Come follow me on twitter http://www.twitter.com/sbeaver

  *Virtualization is a journey, not a project. *

• Can I use an ACS as RADIUS and GANYMEDE to the same ASA Server?

  I want to GANYMEDE to make the accounting of the SAA, meanwhile, the ASA need RADIUS for authentication ssl vpn. Is it possible to reach this object with only a CSA?

  Yes, you can use both. Allows you to add ASA as radius and Ganymede.

  ACS-->---> aaa-client network configuration

  (1) ASA---> 1.1.1.1---> authentic using Ganymede

  (2) ASA1---> 1.1.1.1---> optout by radius

  Don't forget the host name cannot be the same.

  Kind regards

  ~ JG

  Note the useful messages

• How to use MouseEvent and KeyboardEvent on the same function?

  It's maybe a stupid question, but I'll ask her.

  I did a login (textfield and a button).

  mybutton.addEventListener(MouseEvent.CLICK, loginCheck); It's my button

  function loginCheck(event:MouseEvent):void {}
  My code for the function here

  }

  In order to make the connection by using the Enter key, I tried to add:

  myText.addEventListener (KeyboardEvent.KEY_DOWN, keyEnter);
  function keyEnter(event:KeyboardEvent): void
  {
  If (event.keyCode is Keyboard.ENTER)
  {
  loginCheck();
  }
  }

  But of course it won't work because loginCheck is a function of MouseEvent.

  How can I make it work?

  It does not appear that you will use one of the properties of type event mouse or keyboard in loginCheck, right? Then, you can simply set the type of the parameter in loginCheck() to the event instead and add the event argument in keyEnter() when calling loginCheck() from here-> loginCheck (event).

  rmybutton.addEventListene (MouseEvent.CLICK, loginCheck, false, 0, true); It's my button

  function loginCheck(event:Event):void {}
  logic of connection here

  }

  myText.addEventListener (KeyboardEvent.KEY_DOWN, keyEnter, false, 0, true);
  function keyEnter(event:KeyboardEvent): void
  {
  If (event.keyCode is Keyboard.ENTER)
  {
  loginCheck (event);
  }
  }

  TS

• How to use Notepad and utube at the same time on an ipad?

  Is there a way to mulitask with two apps on the iPad, I want to take notes while watching a utube video?

  only on the most recent iPads that supports multitasking side by side

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.