How to run repair downloads when the local disk (c) is bad, system32, rundll

Similar Questions

• How to run an application when the cell phone is power on

  I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks

  It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).

• How to run vi continuous when the VISA read timeout happens

  Hello

  I'm using LabView 2010 through a series of Agilent 6000 Oscilloscope. The Oscilloscope reads data from another experimental machine which will occasionally fail due to failure of the sample. When the machine breaks down, it ceases to send signals to the oscilloscope and leads to the error timeout of read VISA and the vi It is over.  Is it possible that I can run the vi permanently when the error occurs? For example, when the error occurs, it stores the error in the thread of the error. When the vi read the error code of the wire, it sends a command to stop my experimental machine then stop the vi.

  So far, it stops simply during the execution of the visa, playback function. In that case, why do we mistake in and out? Vi stop just when the error occurs.

  Thank you

  Laurent

  
  

• Windows 7, how to extend volume C, when the unallocated disk isn't adjacent?

  I've updated since a 250 GB HDD on a 750 GB hard drive, but can not access the extra space.  To extend the volume C is greyed out.

  From left to right, the displayed disks are:

  System > C > Recovery (D) > HP_Tools > 465,75 GB unallocated

  I want to thank the C drive in the unallocated space.

  Thank you!

  I've updated since a 250 GB HDD on a 750 GB hard drive, but can not access the extra space.  To extend the volume C is greyed out.

  From left to right, the displayed disks are:

  System > C > Recovery (D) > HP_Tools > 465,75 GB unallocated

  I want to thank the C drive in the unallocated space.

  Thank you!

  http://www.pcandtablet.com/Windows-7-General-Chat/236/although-i-have-enough-UN-partitioned-space-extend-volume-option-is-not-activated.html

  If your find it difficult to deal with the windows Disk Manager
  Use this version free http://www.partition-tool.com/personal.htm

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• Problems downloading a file of muse for the first time. Museutils.js is not on the local disk on the file index.html.

  Hi all

  I hope someone can help because I'm a little desperate.

  I started to design a page with a muse of Qooqee model: SENSE.

  I worked for a month on this issue. When I was about to finish, I got a message that there is a new version of Muse to update. I did the update when I was still working in the design.

  When I finished the desktop version, I downloaded using the "upload to the ftp host" button. All fine until he has gave a "error on the index.html file.

  

  So, I was unable to complete the first uploaded to the online page.

  My husband, who knows a bit about coding, opened the index.html file, and we have seen a warning: MUSEUTILS. JS IS NOT ON THE LOCAL DISK.

  

  Reading questions similar to the forum that I can guess that the problem has been built with I started with the earlier version of the Muse and updated the Muse version in the workplace, when I finished the page.

  Now, the page is not alive because I am not able to download the file.

  I don't know if that's the problem, however. I downloaded a fresh sense of QooQee model and erase all content and pages name I will use them (he has added a few pages and I moved the contact page somewhere else on the site map). Then, publish the page Go Daddy and have the same problem. Error on the index.html file. For that I am lost again, because everything has been done with the same version of Muse and the latest model of sense (I don't know how they update the models).

  Can you please give an idea on how to solve the problem? What I have to redo the entire page?

  Thanks in advance, you are my last hope.

  Good to see that we can exclude a Muse for the functioning and the collection of production. The problem must lie in the specifics and/or requirements of GoDaddy, hosting provider. The Muse team is very aware of being a very popular hosting provider GoDaddy , so they want to learn all the occasional problems or quirks that might appear with Muse in combination with these suppliers. It might have to do with the current version of Muse, but it could also be a coincidence that GoDaddy has begun to change some things on their side as well. Or it could even be a Gremlin (colloquial term for a software bug temporary and inexplicable) blocking a circuit which seems to happen from time to time...

  Are you sure that you follow all the advice and guidelines in this FAQ: download an Adobe Muse of the site to a third-party hosting service ?

  Hang on!

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  original title: subject zootycoon
  my computer can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7

  Hello

  1. what version of Zoo tycoon you play?

  2. is it works much earlier?

  I suggest to run the game as administrator and check.

  I suggest you to follow the steps from the links and check out.

  Improve the performance of your computer game

  http://support.Microsoft.com/kb/815069

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• I'm reading a file mpeg and Windows Media Player C00D1199 error. How to get good download of the missing codec?

  I'm reading a file mpeg and Windows Media Player C00D1199 error.  How to get good download of the missing codec?  I have windows 7 x 64 os.

  All is not lost.

  Download and install a pack of codecs, such as K-Lite (Google for it). You can find THAT WMP can then read the file.

  Or

  Download and install a small program called Gspot (Google it)! Drag and drop in its window one of the files, you can't plzy. It will tell you which codecs are used. You can then download and install the only after doing a search on the web for it.

  See you soon,.

  Jerry

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How to run dynamic Action when clicking on a link in a report

  APEX V4.2.3

  DB EA 11.2

  APEX listener V2.0.5.287.04.27

  13 blue-gray theme

  IE9.0.8112

  FF26.0

  I have classic report and I would like to launch a dynamic action (together a show has confirmed and the value of the alert, submit the page, then run a process) when the user clicks on a link in a report or click on #ID #.

  I can write the real actions that I just need to know what to write behind the report link that will serve as a trigger for the DA?

  Thanks in advance

  PaulP

  It's the link attribute

  onClick = "if (confirm (' do something for #ENAME # with EMPNO: #EMPNO #'")) {$s('P5_ENAME_CLICKED','#ENAME#') ;};$s('P5_ID_CLICKED','#EMPNO#');doSubmit()""

  It's getting a bit long on a single line, if you want, put it in a function

  However, fixed, forgotten pair of single quotes as soon as possible.

  Now you have 2 bind variables to use in the process of page after submit.

  : P5_ENAME_CLICKED and: P5_ID_CLICKED

  I've updated the example page, http://apex.oracle.com/pls/apex/f?p=14308:5

  Good luck.

• How can I gat one version acrobat 7.0 download win the one I have is bad and I had to reinstall my computer everything

  How can I gat one version acrobat 7.0 download win the one I have is bad and I had to reinstall my computer everything

  Hi Hal,.

  You can follow the link: download Acrobat 7 and CS2 products download Acrobat 7 on your new computer.

  Let us know if that's what you're looking for or if you have any other questions.

  Thank you

  Yann Arora