How to run terminal console of the CRIO output rtexe

Hello

I want to run the rtexe application in CRIO (9014) from the console output terminal. In my application the availabe lan port is connected to any other device using cross-over cable. That's why I want to change application console using the console terminal. I tried the taskspawn command but the crio restarts. Is there a command so that I can run the terminal console application.

... I don't know how to get any input from keyboard (the new path of application) of the console terminal...

You can use the interface for RS232 communication standard series. If for example you send 1, 2 or 3 as a string to the cRIO and then you change by program the ni - rt.ini to change the path of access between a startup2.rtexe and startup1.rtexe, startup2.rtexe.

Moreover, I have to restart the controller every time I change the path.

When you use the method with the executable and then one more, then Yes.

IAM cannot use the Subvi because I need to change code fpga also to different instances.

I don't understand why using SubVIs on the RT does not give you the ability to change the fpga code.

If the second method example would be Sub1.vi, Sub2.vi and Sub3.vi. When you get the 2 interface command series, you close the reference to the FPGA1.vi that is used in Sub1.vi and stop Sub1.vi. Then, you start by program Sub2.vi where you open and run the FPGA2.vi.

Christian

Tags: NI Software

Similar Questions

  • How can I pause and resume the analog output using DAQmx?

    I use a DAQ hardware to produce an analog waveform.  I would like simply to break the output of the wave and then resume where it left off.  I use DAQmx and LabVIEW 2011.

    I've seen examples that use a digital or analog break trigger, but I would take a break in the software only.  How can I do this?

    -Joe

    Hi Joe!

    I spent some time thinking about it and I realized that you can technically use a fundamental mission of the analog output, as you previously wrote that runs continuously. However, the generated output samples are controlled by the sample clock pulses, and can be manipulated to fit our needs "suspension."

    To do this, we will need another counter task that generates a pulse train (see our examples of shipping under material input and output > DAQmx > generating digital pulses > generate dig Pulse Train - Continuous.vi) that stops and starts the user to choose. This can be in another quite VI or controlled by software. We will use this as the task of our output sample clock.

    Then, the task of the AO, wire a constant to the sample clock source and select ' DevX/CtrXInternalOutput"based on the counter that you specified in the task of counter. You will need to choose "I/o name of filtration" and check the box that says "include advanced terminals' and right-click of the constant. See picture attached as a reference. In this way, the task of the AO is constantly running, but it generates only actually all data when the meter running task.

    Let me know if you have any questions!

    Have a great day!

  • Run a .exe of the cRIO

    Hey, thanks in advance for any help.

    We are trying to open a file executable file (for example the Minesweeper) which is located on the computer via the cRIO, however we cannot use the Exec.vi system for that (maybe we use it wrong and can we?) Is there another way to do this? We try to use our robot as a joystick to play games and therefore need send keystrokes to this .exe, that we are trying to open. I can do typing when executing power off the pc, but cannot open the .exe when running through the cRIO.

    Concerning

    Power supply Guy

    Hello

    What I would do here, is to have two screws, one on the robot and the other on the computer.  The robot one will send commands to the computer (host) through shared variables, tcp/ip, UDP, or stream network (essentially a method of network communication).  The host that VI will take orders and start the game and actually enter the "keys".

    You try to do this without using any code that runs on the computer?  If so, it will be much more difficult.

  • How to run an application when the cell phone is power on

    I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks

    It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).

  • How to run under Linux of the CGF 11 g 10 g (AS)

    I'm the developer of oracle 11g on windows forms.

    My application server is on Linux (10g) platform


    How to run the application server of the CGF 11 g to 10g?

    Published by: Naeem Akhtar, July 13, 2011 10:43

    You cannot run a form 10g with a length of 6i, and you can't run a form 11g with a length of 10g. If you want to run forms 11g, you have to install an application server in 11g.

    see you soon

  • How to run a script in the idle task

    Hi all

    Successfully, I wrote and performed a routine of idle task that periodically executes a simple method. now, I need to add a feature to this method so that it performs a simple javascript.

    Here is my code:

    ...

    UInt32 myTestIdleTask::RunTask)
    UInt32 appFlags, IdleTimer * timeCheck) {}
    If (appFlags &)
    (IIdleTaskMgr::kMouseTracking
    | IIdleTaskMgr::kUserActive
    | IIdleTaskMgr::kInBackground
    | IIdleTaskMgr::kMenuUp))
    {
    Return kOnFlagChange;
    }

    This-> runTestScript();

    Return kmyTestFvExecInterval;
    }


    void myTestIdleTask::runTestScript() {}

    This is the test script

    PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

    I think that I should call CScriptRunner::RunScript()
    somewhere here but without success

    }

    Any help on how to run the Javascript code for myTestScript from the runTestScript() method?

    Thanks in advance,

    Halin

    Already, I solved my problem by using "IExtendScriptUtils".

    For those who are interested, here is my solution:

    void myTestIdleTask::runTestScript() {}

    This is the test script

    PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

    PMString engineName ("myengine");

    Int32 errorCode is Utils()-> RunScriptInEngine (engineName, myTestScript);.

    }

    Good luck.

    halin

  • How to run a procedure with the object as OUTPUT parameter

    Hello

    I have a procedure and it composed of 2 parameters, there is an input parameter and it's some ID (NUMBER datatype) and 2nd parameter is an output parameter and it an object type. I want to run this procedure, but not able to do the same thing. Can someone please suggest me how to run a procedure that got the object as output parameter.

    Thank you very much in advance for your support.

    Example:

    SQL> create or replace type t_obj as object (ename varchar2(10), deptno number);
      2  /
    
    Type created.
    
    SQL> ed
    Wrote file afiedt.buf
    
      1  create or replace procedure myproc (p_empno in number, obj out t_obj) is
      2  begin
      3    select t_obj(ename, deptno)
      4    into obj
      5    from emp
      6    where empno = p_empno;
      7* end;
    SQL> /
    
    Procedure created.
    
    SQL> set serverout on
    SQL> declare
      2    v_obj t_obj;
      3  begin
      4    myproc(7788, v_obj);
      5    dbms_output.put_line(v_obj.ename||','||v_obj.deptno);
      6  end;
      7  /
    SCOTT,20
    
    PL/SQL procedure successfully completed.
    
  • How to access Terminal Server in the Sierra recovery mode?

    Hello

    I started just Sierra in recovery mode and the terminal is missing from the menu.
    The main installation window has the usual restore, Reinstall, help and disk utility. But in the top menu, there is nothing else than "language Chooser". Terminal disappeared.
    (The material is a 2011 MBP 15 ")

    Help!

    If you click on the language selector and then cross the bar of menus, correct menus appear actually?

    What would you say if you select an item in the language selector, then select a language?

    I only so this menu appears briefly, so I don't know what is in it. It should disappear and be replaced by the normal menus.

  • How to run a package on the calendar or automatic

    Is it possible to run a package on the calendar?

    For example, all our outgoing pdf to send by post mail must obtain a watermark. Doing so by hand for each lot is a lot of work.

    If I can save files in a particular folder in which Adobe running a lot on the schedule (for example, every 2 minutes), this could save a lot of work.

    Acrobat cannot be automated in this way. You will need to use other

    request to do it, or do it (execute the Action in Acrobat) manually.

  • How to run repair downloads when the local disk (c) is bad, system32, rundll

    I am home with one leg broken, broken arm, a broken jaw and having my left shoulder replaced, my question, can I me pls someone, anyone, to come and go in my store and get my sled 5lb.hand, I have six kids and they will get no money, in any case, my snowmobile accident, me in front of this infernal thing two months ago. So you can surmise I don't know anything about computers, but I managed to eek exist on this subject, now all I get is not a valid windows, system32, rundll rasapi32 image, I tried to download stuff to repair, but everything on the local drive (c :)) how that will help its just put more wood on the fire I can say) , and I can't get one, that is running. signed, broke and in maine.thanks. PS.it all started after I lost the sound on my speakers.

    Hello

    ·         Are you able to boot to the desktop normally?

    If you are not able to boot to the desktop then, I suggest to do a restore of the system from the recovery console and check if you're able to start on the system or not.

    How do I recover from a corrupted registry that prevents Windows XP startup

    http://support.Microsoft.com/kb/307545

  • How to run both versions at the same time on a Mac?

    I have a setup of highly personalized FF v42 I'm happy but my Firefox version is seriously outdated and it's time to upgrade. I suspect that a lot of things will no longer work on the latest version (especially some of my old addons).

    To facilitate the transition, I want to be able to run my old version (temporarily to say a few weeks) and the latter at the same time in order to customize a new the same standard and find solutions for everything that is no longer supported, and continue to use my old install/addons until this transition is complete.

    I found this thread:

    https://support.Mozilla.org/en-us/questions/1061740

    but the solution has links that no longer work. I couldn't find anything recent on the web or youtube covering the Mac.

    I understand that the principles will be to:

    1. install the current version to a different location. Is that dragging the .app FF file to somewhere other than the Applications folder or is required as part of the installation?

    2. use a different profile for each installation. Not sure what order to do so that I do not lose my current profile (old). I guess it's to create a new profile, switch to the new profile and then install the current version, which "takes over" the new profile. Then I can go back to the former when I run my my old FF?

    Any help much appreciated.

    Installation of multiple versions on Mac OS X is basically dragging the Firefox application out of the DMG file to the desktop and rename the folder. You can drag the Firefox application folder renamed in the Applications folder as normally install you Firefox.

    You will need to use the Terminal to create a new profile for this version. Make sure that no profile is selected by default for Profile Manager to display when you start Firefox. You can check that in the profiles.ini file.

  • How to run vi continuous when the VISA read timeout happens

    Hello

    I'm using LabView 2010 through a series of Agilent 6000 Oscilloscope. The Oscilloscope reads data from another experimental machine which will occasionally fail due to failure of the sample. When the machine breaks down, it ceases to send signals to the oscilloscope and leads to the error timeout of read VISA and the vi It is over.  Is it possible that I can run the vi permanently when the error occurs? For example, when the error occurs, it stores the error in the thread of the error. When the vi read the error code of the wire, it sends a command to stop my experimental machine then stop the vi.

    So far, it stops simply during the execution of the visa, playback function. In that case, why do we mistake in and out? Vi stop just when the error occurs.

    Thank you

    Laurent


  • How to run a file through the command prompt window

    I try to download a zip called Kindle Gen - file instructions say I should first extract it to c:\KindleGen and then run it through the command prompt window by typing c:\KindleGen\kindlegen (I ' v it not compressed)

    The showsc:\Users\Barry prompt window > then I'v typed into it after the > but its not to recognize the path to the file.

    Wonder if anyone can advise this as i ' v hurts?

    Thanks Barry

    I try to download a zip called Kindle Gen - file instructions say I should first extract it to c:\KindleGen and then run it through the command prompt window by typing c:\KindleGen\kindlegen (I ' v it not compressed)

    The showsc:\Users\Barry prompt window > then I'v typed into it after the > but its not to recognize the path to the file.

    Wonder if anyone can advise this as i ' v hurts?

    Thanks Barry

    If you have used Windows Explorer (computer) to create the directory in question (C:\KindleGen\) and extract the files in this directory...

    Open a command prompt.

    Type:

    CD \KindleGen

    Type:

    DIR

    Run everything you are supposed to run by typing the name.

  • How to run a script using the OMB tcl

    I'm trying to run a tcl script using the following syntax in cmd

    D:\app\Username\product\11.1.0\db_2\owb\bin\win32 > ombplus.bat c:\t.tcl

    and I get the error

    OMB01001: Not connected to the repository.

    The tcl script was basically accompanied by a tutorial and I can't continue the OWB tutorial, unless I run it first

    Departure ombplus.bat

    You can then start the script with the source command such as

    source C:/t.tcl
    

    Be careful with the backslash (he is not C:\t.tcl)

    You must also add a connection before your script to OWB with the OMBCONNECT

    OMBCONNECT $UserLogin/$UserPassword@$DBHostName:$DBHostPort:$ServiceName USE REPOSITORY '$RepositoryUser' USE MULTIPLE_USER_MODE
    

    Replace the parameters $ with your own value.

    And then your script, you can disconnect:

    OMBDISCONNECT
    

    Success
    Nico

    Documentation is here for the 11g OMBCOMMAND
    http://download.Oracle.com/docs/CD/B28359_01/OWB.111/b31279/TOC.htm

  • How to run a code in the form postSubmit event

    Hi all

    I have a simple code that runs perfectly when I put it in form : preSubmit: event, but when I moved to the : postSubmit: event it does not .

    Please let me know where to put my code if I need just to be executed once the form is submitted?

    Thanks in advance,

    Mohammed Al-Christiane

    Try using this code:

    vMsg var = ""; message to display to the missing mandatory fields

    var successflag = 1; indicator to determine if a required field is null

    validate all required text fields

    for (var nPageCount = 0; nPageCount

    var oFields = xfa.layout.pageContent (nPageCount, "field");

    var nNodesLength = oFields.length;

    for (var nNodeCount = 0; nNodeCount

    If (oFields.item (nNodeCount) Contracting == "error") {}

    If (oFields.item (nNodeCount) .rawValue == "" | ") oFields.item (nNodeCount) .rawValue == null) {}

    vMsg += oFields.item (nNodeCount) .name + ",";

    successflag = 0;

    }

    }

    -type in your code

    If (successflag == 1)

    {

    run the insertion in the database code

    }

    on the other

    {

    XFA. Host.MessageBox (vmsg); Displays the names of missing fields

    }

    Kind regards

    Chaitanya

Maybe you are looking for

  • Unable to bookmark Web sites/pages

    All your Favorites options do not work. Right click on the page to select the bookmark this page double clicking Gold Star and clicking on bookmarks in the task bar to save are examples.

  • HP 15-ac190nia: network drivr and synpatics

    HelloI have hp laptop 15-acniaand I tried to identify its drivers after installing windows 7 64 bitbut impossible to install the network driverand the synaptics device cannot be tooI tried to reinstall several times... but nothing changescan I get he

  • How to terminate TestStand Application after a mistake of LabView.

    We just started launch TestStand from a command line, and when he (TS) stops execution of sequence error of LabView, the command window does not know its status. So, I have a two part question: (1) is there a way to STOP COMPLETELY the TestStand appl

  • share a printer with two computers

    I have a desktop computer that is connected to a printer that works well, but I also want to be able to print off even the printer with my laptop. Help?

  • Error update Vista 80070246

    I'm not able to install three updates to Vista.  Get the error code 80070246I tried to install several times... nothing doesn't.  Can anyone help.