How to run the installation on a 5 GB pcmcia hard drive, it does not start?

Similar Questions

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• What is tdrc.tdrcfacade and how to run the installation wizard?

  What is tdrc.tdrcfacade and how to run the installation wizard?  My desktop creative cloud application does not open properly... it is just a blank window.

  Much obliged,

  Angiecrichards@gmail.com

  ! !

  Are Angie, you a blank white screen? What version of OS are you using?

  Here's what you can try:

  1. Blank white screen. Sign in | Creative cloud Packer
  2. New application Cloud Creative unusable: it is empty!
  3. Creative cloud Packager white screen after the Adobe ID Login
  4. Re: screen creative black cloud

  Waiting for your response.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Power goes off when the PC is turned on, it says "disabled keyboard", Vista does not START or reinstall.

  My PC with Vista Home premium does not START because the keyboard does not work. It's a Dell Dimesion E521 PC with Vista.

  This happened after a power failure; I get a black screen that says «disabled keyboard» The key board works and the USB ports have power to them.

  The START menu was initially protected by Word, but I have the game ENTER the PASSWORD off the black screen by removing the battery inside the PC.

  She said a THERMAL cut-out has occurred. Does anyone have any info or ideas?

  Thanks for your time in advance!

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1e228424-E520-4ec5-AF99-252a6e645f75/

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Linpus Linux how to run the installation on a CD FRO invites him BACK

  I just bought a new laptop Acer E1-571 and it comes with what is called linpus linux and the screen comes up with a DOS command prompt:

  [root@localhost/i#

  How to run a program on a CD! I know that the program is in the root directory of the CD but how to make the computer to run it? DOS commands elude me after 20 years of not using them?

  BIOS legacy mode does not appear as an option in one of the menus.

  Nathalie! While Linux is booting and the option to boot from the CD-ROM, press Ctrl/Alt/Del!

  Thanks for your advice tux0topo

• How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

  How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

  Hello Ghostdogaln.

  How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

  If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.

• The installation of Vista Edition family program Premium 64 bit does not work and CleanUp Utility does not work.

  Whenever I try to install or to uninstall or upgrade programs even I can't do so until the Windows Installer will not work.  I downloaded the cleanup utility and it will not run.  It stops with "internal error 2908" and if I continuously press the OK key it will then stop the installation with "Error 1406".  It is really a nuisance and need to be repaired.  What can I do?

  Have you tried the logging option and if so did throw any light on the matter?

  Have you tried creating a new user and see if it is more likely?

  Looks like (for me) it's the access permissions problem that is behind all this?

  http://www.Google.com/search?q=%22internal+Error+2908%22&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

  http://www.Google.com/search?hl=en&RLS=com.Microsoft%3Aen-au&q=%22error+1406%22++&btnG=search&AQ=f&OQ=&AQI=G10

  Here is a small tool that you could look to see what's happening under the hood.

  Process Monitor v2.7
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/processmonitor.mspx

  Have you tried system restore earlier too?

  You could just back up your data and then restore the machine at the factory as of the 1st day in the life of the machine.

• After the installation of Win 8.1, Acrobat 9 Pro suddenly does not work

  I have CS4 Web Premium and Acrobat Pro v. 9.5.5.  I bought a new computer to window 8.0 90 days ago, installed subsequently, active and everything is fine. Yesterday, I upgraded to 8.1 Win. Now, when I opened Acrobat Pro, I get a message saying that it has been installed as part of a suite and open another program in the first sequel. When I click OK, Acrobat is closed. I tried to open almost all other programs in the suite (bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will not always work, and there is no activation message.  I checked my Adobe account, and my version of Acrobat 9 Pro is still listed, with serial number.

  I am very disappointed, because I use Acrobat Pro a bit, and currently it will not open at all. Other that call Adobe to help (no free support # listed), with the help of discussion online (no link available), or by e-mail with them (no address listed)... What can I do to "activate"?

  I tried open Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what seems to be an entry with the substance of the activation box.  It only appears for the second half, so I can't do anything with it.

  The process of installation and activation for Acrobat as part of the CS is different from that of a stand-alone Acrobat. First of all, the issue of opening another application in CS is common (not sure if she should remain open when you start Acrobat. You should be able to get more information about the CS forum. You can also just try a repair. Do not forget that Adobe will not doubts for you AA9 on Win 8.1 since they are not listed as compatible (this does not mean that they do not work together, but they are not certified for this combination). It may be that Win 8.1 added some hooks than messes up Acrobat. It might be time to move on AA XI. AA9 is the oldest product that qualifies for the upgrade.

• How to remove the password of user on Portege M HARD drive

  Hi, is it possible to remove the HARD drive password after recording a? If so, how?

  Hello

  Check it please this document http://support.toshiba-tro.de/kb0/TSB6301F90006R01.htm

  I know, HARD drive password cannot be removed and if so, do you really think that will be released this information to the public. ;)

• I have a BT Yahoo email account and since the installation of iOS 9.2.1 my e mail does not automatically sync and when I responded to the request of yahoo to enter my password, nothing happens.

  I have a BT Yahoo email account, but since the installation of the updated iOS 9.2.1 my yahoo emails have stopped synchronization and when replying to the request for the tenant to my yahoo password it is not accepted.

  Have you tried to remove the Yahoo account and add it again? You can access your mail of Yahoo from somewhere else? Webmail etc.

• HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

  My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

  I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

  I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

  Thank you very much.

  Kimberly

  PS I found this web page below and I want to just make sure that it applies to me:

  http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

  This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

• I have a problem with the installation of FSX on an external hard drive.

  I want to put Microsoft FSX upward on an external hard drive (1.5 terabyte) but during the installation I don't see an option to install on a drive other C: I am given this option in installation?  I have Windows 7, 64 bit.

  Thank you

  hocdaddy

  Hello

  Please contact the Microsoft Community.

  I'd contact Flight Simulator in favor new assitance.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  In addition, you can also publish this query in their community as well-

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Let us know if you have other questions about Windows in the future.