How to run windows (vista, 7), during the night, or during any period of time and do not have to worry it restart itself.
Windows Update will restart when the changes are applied. I understand why. However, when I do not use windows, which is relatively rare, and the specific task, I often run long processes. Windows will reboot the machine by force regardless of what I'm doing at the time. I guess if you are electronic control or Watch youtube, its not that big of a deal, but when it stops at Midway for a night process, its quite frustrating.
I had turned off the windows update service, so I guess that takes care of things, or is there another process that verifies that the windows update is running and restarts it? Thoughts? Even if restarting is intentional, the fact that a modern operating system will turn off when it receives a message from the mother ship is quite disturbing (beat tone comes from the fact that I'm a nerd of linux. Sorry).
Hello
Check in scheduled tasks and also like antivirus programs that can update themselves
and sometimes require a restart.
Learn how to create a scheduled task leads to the understanding of those that have been created.
How create a task in Vista Task Scheduler (apply as well to Win 7)
http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html
=============================
If something stops Windows:
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
How to uninstall windows vista or reformat the c drive
How to uninstall windows vista or reformat the c drive?
Hello
You do not uninstall Vista as such.
Vista cannot uninstall itself by Vista, formatting the drive that is installed on. In other words it cannot remove itself.
You install another operating system, removal of Vista during the installation process of the other operating system...
You don't say exactly what you are trying to do.
You can format a disk if it a second drive with the Dual Boot operating systems and leaves without data or the operating system on it at all.
We need more information.
See you soon.
-
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
Hello
The best way is to clean install and start over.
In addition, it is not legal to have both installed version that the license is for a single installation.
If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.
See you soon.
-
Window Vista Home Premium now, I download again at this same computer and does not activate
[removed personal details]
I HAVE THE ORIGINAL OF THE INVOICE WITH ME.
IF YOU WANT, I WILL SEND YOU.
Thank you
KAMAL ARIJAOriginal title: I bought this computer 3 years from DELL with window vista home premium now, I download in my computer even and why you won't turn on
U cannot activate online after a few specific activations.
I ask you to join your local team to activate product to the MS Support for assistance:
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person. -
Activation problem
I reinstalled Vista (upgrade), when I try to check and enter my product key, it says "only for the upgrade not a clean install. On the activation screen, it shows all telephone support option. Thanks for any help!
This is because a product upgrade key requires a copy of Windows to upgrade. That's why its called an 'upgrade '.
Restore the copy of Windows you improved the first time and then move on to Vista.
-
When I try to turn on the computer it gives me a message of startup repair. There are a few problem signatures read like this
The problem StartupRepairOffline event name
Hi GwenBenson,
1 have you tried running the Startup Repair tool?
2. when the problem started?
3. did you of recent changes to the computer?
4. are you able to boot in safe mode?
Method 1:
Step 1: You can check if you can boot into safe mode.
Start your computer in safe mode
Step 2:
If you can boot into safe mode without any problem, then you can try to perform a restore of the system to a restore point before you have been affected by the problem and check.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Method 2:
Alternatively, you can try using the last known good configuration and check. It's a Windows startup option that uses the most recent system settings that worked correctly.
For more information, you can consult the following article:
Using the last good known Configuration
Hope this information is useful.
-
Ive looked online for answers. I even passed on my media for another Manager. I have a 8GB microSD/SDHC (with adapter) and XP does not recognize. I found a patch that is supposed to solve this problem, but when I try to install it, it tells me that I didn't need because I have a new update already installed. so now im stuck. I also tried to uninstall SP3, but it isn't a delete for it under Add/Remove Programs button.
Hi Timothy,.
· Other USB devices work well?
We will check if the following is useful.
Method 1: Run this utility of automated troubleshooting and see if it helps.
Hardware devices do not work or are not detected in Windows
Method 2:
Step 1: Try to reinstall the USB controllers and check if it helps.
a. click the Start button and then right click on my computer. Click on properties.
b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»
c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.
d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.
Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.
See also:
-
How to write textfield that can change the line after a certain period of time?
Hi all
I would like to create a field that can take an entry and after some specified width, can change line.
Thank you best regards &,.
Narendra
See this Article.
http://NA.BlackBerry.com/eng/devjournals/resources/journals/jul_2005/creating_textbox_field.jsp
-
Someone can help me with this one, or is there a phone number I can call?
If you get charged for any product, it might be possible for the product is registered with a different email address.
Our support team will be to find out the details and help you with the cancellation.
You can contact the cat here for cancellation, Please contact customer support
Please sign in with your Adobe id when contacting chat support.
-
When I drag an image into the scenario it is amplified as 7 times and can not use it
I used 8.0 Adobe Prime Minister throughout the year and all this weekend. Everything worked well. (I've never updated 9.0 because the presets will not be postponed and didn't want to recreate all the)
I decided to make a Flash movie. When he started the title page has been amplified really. I have no tlike the order, so I closed the process and rebooted PE8.
After rebooting, each image that I drag on the timeline is amplified as 5 to 7 times. If I double click on the shape of the image the plateau project the image looks good. I can't just drag and drop. I need to change the effect to 13% of the value in the tab motio for get the image to fit.
I uninstalled 8 and reinastalled. I installed the updates. Still nothing. I can't understand what is happening.
Y at - it a setting or something.
Thanks Chuck
(A Dingo thing I noticed after the gaffe of instant film - all my photos in the status bar have like a little (red and square circle green) icon in the upper right corner.)
Under Edit > Preferences > general uncheck "Default scale to frame size". This works for future added photos. For those who are already added right click on the image in the timeline panel and uncheck "scale to frame size".
See you soon,.
--
Neale
Insanity is hereditary, get you your children -
How can I restore my Acer laptop running windows Vista to the factory specifications?
I was given an Acer Aspire laptop. It is running Windows Vista with 512 MB memory RAM. It has been used and I want to try to restore it to the factory specifications. How can I do this? I tried system restore and it fails every time.
Hello
you have a very low amount of RAM to run Vista
System Restore should not perform a recovery plant
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Acer is usually press Alt + F10 at startup to start the recovery process or through the Acer eRecovery Management under all programs
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Dell etc recovery disk
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op. I have internet project 8 service pack 2 of windows and norton security suite installed on my computer. I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?
Thank you!
Windows Update error 80070490
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.
The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.
If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.
Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:
Close all programs and restart your computer.
Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:
Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).
List programs, click Setup.exe.
Click on install now.
Click go online to get the latest updates for installation (recommended).
If you are prompted to do this, type the Windows product key.
What type of installation you want? window, click upgrade.
Once the installation is complete, restart your computer, and then run Windows Update.
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Here are the details:
I have Windows Mail installed on my PC and you want to add an e-mail account. The issue started when I was trying to send a document I had picked up on a website and received an error message there was a problem with POP3. Then, I tried to set up an e-mail account and after that following instructions was puzzled because I didn't know the name of the exchange server. I am running Windows Vista on a Compaq Presario.
I first contacted my internet framework, which is Charter Communications and they referred me to Microsoft, which, in turn, was told to contact Charter Communications, call the Compaq or come to this site. At this point, I'm a little frustrated.
Hello
If you are tring to add an e-mail account in Windows Mail, you get the settings from your ISP (Charter Communications), then follow the information from Microsoft on how to implement.
You need the Charter:
1. your username with them
2. your password with them.
3. incoming for them mail server.
4. the outgoing e-mail server for them.
Charter e-mail settings:
http://www.myaccount.Charter.com/customers/support.aspx?supportarticleid=1417
Then follow the steps to set up Windows Mail:
"Windows Mail: setting up an account from start to finish.
See you soon.
-
problems with wireless Vista "local only".
How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?Hello
Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer. Since he does not have details of the database of network devices, communicate with him.
- You are able to access the Internet?
Try the steps mentioned below and check:
Method 1:
Step 1: Enable or disable a network adapter and then check:
http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter
Step 2: Run Network Diagnostic tool and check:
Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Method 2: Wi - Fi and in Windows network connection issues:
Reference links:
Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041
Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx
Hope it works.
-
can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan
Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
I hope this helps.
Maybe you are looking for
-
Cannot add PDF by using the email Yahoo email
I use email (yahoo product) Rocketmail I can't attach a PDF file to my outgoing emails, also use Norton 360-virus/firewall.Thank you
-
Technical support would call me out of the blue?
I just got a call from a number of Brit Virgin is saying they were with the Technical Support of Windows, I was getting a lot of error messages, and they would show me how to fix them. They wanted to get me intowww.ammyy.com. I asked a callback num
-
password has expired Windows Vista
password has expired Windows Vista
-
Questions for a converted to PC Mac user
Hello I am currently a student and we were given access to office 365, and I had a few problems. I can't seem to find the word, and I can't install it for some reason any as it says its open even if it is not or he found other files that must be dele
-
Smartphones blackBerry need my terminal to get blocked because my blackberry was stolen
Hi, my blackberrybold was stolen and I wanted my terminal to blocked the person who stole so he won't be able to get into my pictures, sms... can I retrieve my contacts also? could you do something for me? I have the pin code of the terminal and the