How to save a modified image on SD card on Photoshop Touch?

Similar Questions

• How to save a binary image

  Hello everyone.

  How to save a binary image in a computer? If I right click on the image, then choose "Save Image... ', the saved image will appear empty. I understand that the image is in 0 and 1 but I do not know how to implement the code.

  Thank you.

  Use IMAQ multiply to multiply the image 255 times.

  Bruce

• How to save an imaq image starting from a continuous stream, like a snapshot

  Hello

  I spent hours trying to find a solution for this on the internet for what I think should be really simple:

  I have a camera that gives me a stream of images, which I show in a chart of the image.

  Now, when the user clicks a button 'save', I want that picture that was shown at the moment where the user was hit 'save' is recorded. However, the user is prompted for a file location and name, so some time passes between hitting 'save' and write the image to disk.

  Meanwhile, the new images will be at the position of the pointer in the image that I wanted to save.

  It is clear to me why this happens, but how about him?

  I tried to make a copy copy Imaq, but this will give me just a new pointer that is always related to the old.

  I tried to convert it to an array, the same effect.

  I also tried writing a queue that contains a single element that has a buffer of image. The queue was not in a loop (which of course would replace the picture there), but again, the queue also just seemed to save the position of the pointer, while creating a new blank image in advance and I copied the image that I want with Imaq copy in this image buffer.

  So, how to store the actual image (not pointer) in memory to save a few seconds later?

  Basically I want something similar to what does the 'snapshot' of the curve of the image function.

  Any ideas?

  Thank you very much!
  Philipp

  Hello

  Thank you very much.

  I consider your solution already, however, I thought it's kinda an overdose.

  For some reason any, I don't know, he now works as I wanted. See example below (really just, I always wanted a picture).

  The only difference from what I tried earlier, is that now I did not specify the data type and the size of the new image... do not know if this is the reason why it did not work.

  Uday thank you very much for your help!

  Philipp

  PS: How did you make the image you posted in your message visible? Mine is just a link.

• Question - how to save a transparent image to JPEG? - But we know all THAT JPEG does not support transparency.

  We know all that JPEG doesn't support transparency, but the attached file is in JPEG format with transparency and opening the file in Photoshop cs4 its error display (screen shot below) and I tried out in the procedure below

  Opening files in ms-paint and new re-registration in png or JPEG, but shows error like this "complete transparency will be lost" (screenshot attached)

  File ms paint

  

  Image to the site with transparent

  

  Original image - in JPEG format

  

  Photoshop error

  

  Please help me with this problem

  Thank you

  Another thing to try in photoshop cs4 is to go to file > open as and select PNG and then click Open.

  

• How to save attachment of email on SD card

  How to save an attachment to my e-mail on my SD card on the Surface 3?

  Original title: Surface 3

  Hello Alison,.

  Welcome to Community Microsoft, I will certainly help you with the information you want. I would like to ask you:

  • You use the Mail or Internet Explorer to access your emails?

  If you use the webmail through Internet Explorer, you can see the following Microsoft article:

  Download files from the web

  You can also download the file to the default download location, and then save it to another location by following the following article:

  Save a file

  Hope this information was useful.

• Envy4500: How to save a scanned image

  I scanned a picture. I don't see any way to save her.

  Hello and welcome to the community of HP @shamacson,

  I understand that you are looking to put a scan of a photo. I'll be happy to help you.

  Below, I've posted a link to a document that has some instructions on how to analyze. Please try all the steps in order and get back to me with the results.

• How to save multiple JPEG images in a single file

  I scanned 22 photos (1800 KB total) and I need to transfer all of them for a job application.

  The problem is, when I'm on the job site and I hit the icon of the file attached, I can only select one file.

  The site will only allow a single file transfer only.

  So, is it possible to save all jpeg in jepg files one file, so I can send them into a single file?

  What email program are you using? If you used Windows Mail for example, you could highlight all 22 JPEG files, and then drag them into the text box of a new message and they will settle.
   
  You can put all the JPEG images in a single folder and then right-click | Send to | Compressed (zipped) folder and attach that. The recipient would save the file and then right-click | Extract all.

• How to save a PDF image in jpeg format?

  Hi people,

  There is a pdf image, I want to save as a jpeg, so I can post on the likes of LinkedIn. Can I use Adobe for this? If so, pointers would be much appreciated. Thank you

  Yes. You can do this with any version of Adobe Acrobat (not Adobe Acrobat

  Player) or with the online service export to PDF.

  Tuesday, March 15, 2016 to 20:19, admccaawake [email protected]>

• How to save a video file on sd card or synchronization on pc/youtube

  Hello! I got the Droid since the beginning of the year and a few times where I recorded a video and tried to post on YouTube I always said 'Network error has no' even though I am clearly in a Wifi network. Is this because my phone expires before the video can finish loading? because they are 5 + minutes or is something more going on here? Super frustrated...

  While I tried to sync my phone to laptop Dell and get the video from there, and even after that I have 'mount', there is no files that open up on my Gallery. And I tried to save it on my memory supplied with the phone, but when you hold down on the video it comes even as an option 'share '. I can't email myself because the file is too large and I really need to get a video I recorded on it for school work.

  HELPPSSSS! THANKS THANKS THANKS YOUUUUUUU

  I can't post on YouTube, but if you have recorded the video on the phone, it will be quite easy to explain how to get it on your computer.  Once the phone is attached to your computer simply browse through the folder: folder DCIM/camera.  This is where the file will be located.  All photos and videos that are taken on the phone are saved in this folder.  Now drag and drop one you want on the computer.  I hope this helps.

• How to make a raw image of "My pictures" in Photoshop?

  How to make a BRUTE of 'My images' image in Photoshop? When I send to Photoshop, it appears as a gray checkerboard. The title is on top. When I try to send a photo from Camera Raw, it does the same thing.

  He has worked or is it just something that started happening recently?

  Have you tried to reset the photoshop preferences file?

  http://forums.Adobe.com/thread/375776?TSTART=0

  Have you installed the latest updates for photoshop cs5?

  In photoshop cs5 select help > updates

  It may depend on your browser to display information system here on the forum, but using firefox as an example, you would open the system in photoshop news, press on then copy OK.

  Here on the forum, you press the CTRL key and paste.

• How you automatically geotag of images using the card

  I use a 6 d to create a GPS log, but I want pictures to geolocate of other cameras.  According to the manual and help files it should be an automatic way to place a geotag in these images based on their timestamp.  Unfortunately, I can't "fourth" icon on the lower left corner of the tab image so I can click on it - see page 12 of the manual for version 1.4 (this icon has a PIN & + with AUTO below).

  I have had several conversations with Canon and seems utility of Canon card will not automatically geo - tag images, so I switched to geolocate.  It was a bit difficult to get in the right seat (must also be GPSBabel and exiftool and dcraw either fully functional).  I also wrote a small C program to automatically run GPSBabel to convert the log of Canon in .gpx format file and then run geolocate.  Everything works pretty smooth now and done card utility should do.

  MuRF

• How to save an edited photo?

  Modification of photos, want to download on a site of storage of images, but can not find the modified pictures, only the originals.  How to save the modified pictures?

  Lightroom help | Export photos from Lightroom

• When you save an image in PS CS 6 and go into Lightroom 5. The original and the modified image are at the end of the line upward.

  I use a Mac, 5 Lightroom and Photoshop CS 6. I started having a problem with the line up in Lightroom 5 after saving an image in PS CS 6. For some reason when I save the edited image 6 CS form he takes the modified image and the original image and put the end of the line up in Lightroom. If I take the modified image and move it to the right of the original, it will put two of them in the line up where they should be. How can I fix it. I looked at the menu for a kind of framework with no luck.

  Change the sort order. View-> sort

• How to save image Lightroom changes in the source file?

  My experience with the trial version of lightroom is very positive regarding the powerful image editing features and associated metadata.  But I can't find a way to save changes 'develop' images in the source file for the photo, with that I work.  So far, I am able to save metadata in the file, but not the image editing.  Of what I read, I'm afraid that's not possible without ridicule roundabout exporting to new files then copy / move multiple copies around, etc.. Without this opportunity, I am sure that I will buy Lightroom and will miss out on all the powerful features.  Without an OPTION that turns on the equivalent of a button SAVE, manage my photo collection would be a nightmare.

  So my question is: How do you save the change (i.e. developed) version of photo in the same file where the original photo has been stored?

  Please, please spare me the answers telling me how stupid I am want to do this and that the cognisenti and professionals would NEVER do that.    But please tell me there is a secret place to enable this option in lightroom.

  Thanks in advance.

  Dad Ben,

  LR stores everything you do in his catalog. The word "catalog" in LR - talk indicates not your images, but the database where LR all the stores. This database (catalogue) is a file with the ending < .lrcat=""> and you can see where he is going on > Edit > catalog settings > general tab.

  This storage or registration in the catalogue is happening constantly and automatically and you don't have to press a button to .

  Stored or saved in the catalog are your changes and everything related to the management of the image (including the location of your image files), captions, keywords, etc.

  For this reason, it is very important that preserve you and protect your LR catalog as you preserve and protect your image files. This means that (a) you know the location of the catalog and (b) you should make backups regularly. Without the catalog that you would be always your image files but your changes and everything what you in LR would be lost.

  LR does not write to the original image file. But there is the possibility to save the changes in an xmp file, which is a small file which is (normally) Moreover the image file. Do you this backup to the xmp file either in the library Module by going to > metadata > save metadata to file (or the shortcut Ctrl / Cmd + letter "S"), or in the Module development by going > Photo > metadata save file - or CTR. + S.

  With DNG, it is a bit different; with Lr DNG writes the changes to the file header. But the procedure is the same.

  Economy of XMP (or in the header of a DNG) is not necessary because LR records everything in his catalog - automatically. Economy of XMP (or in the header of DNG) has the effect that the changes you made in LR are now visible in any other Adobe program that can read the XMP files (or DNG files) - for example Adobe Bridge. But for LR, it is not necessary.

  And there is a caveat: while LR records everything in the catalog, not all things that you do in LR are written in XMP e DNG. If only the LR catalog records everything you've done in LR.

  To answer your question: you do not have to save the modified version of a photo in the original file. LR saves your changes in the catalog automatically and displays your changes because he reads the original image file and then apply the changes to the display.

  WW

• How can you save the background image contained in a Thunderbird e-mail message

  How can you save the background image contained in a Thunderbird e-mail message

  Have you read the instructions which preceded the right click? What of their suite?