How to save the hidden restore partition?

Similar Questions

• I delete the hidden restore partition?

  Ive had a Toshiba Satellite laptop running XP 4.5 years and its great summer running.

  My grandmother got a Toshiba Satellite that is about 1.5 years with record better than mine. Its running Vista and its performance is pathetic. Liked a lot my laptop performs so much better and faster cela. I've restored the operating system. This is not enough.

  So now I want to install XP on the laptop using my recovery disk

  So first of all, I need to format the hard drive. When I hold the power button to power off, then zero holding, and put on I reached recovery utility. From there, I can choose Reset "out-of-box", or I can format it.

  My question is, if I choose the format, it will properly format the computer allowing me to run my recovery disk and reformatted it the hidden partition containing system restore information? I suppose not, but I would be sure

  Thank you
  Tim

  Hello

  As far as I know the recovery disc formats the entire HARD disk.

  This means that all data and all partitions will be erased from the HARD drive.
  After that, the recovery disk would begin a process that would create partitions (also the one hidden) that have been created as on the first day of purchase.

  Simply says that the laptop would be fixed to the factory settings.

• Hidden restore partition...

  The original HD has the OS partition and the hidden restore partition.  Since then, I installed a larger hard drive and installed XP Pro (SP3).  I still have the original HD.  Is it possible to burn an image or a copy of the hidden partition on a CD or a DVD?  And if so, isn't the work of restoration of the original machine?

  Thank you

  Found a small free utility called EASEUS Partition Master 5.0.1 Home Edition. Did exactly what I wanted. Found the partition, a few clicks and then 'display '. Restarted and voila, the restoration of partition ready for burning.

  http://www.partition-tool.com/personal.htm

• Destructive recovery - hidden restore Partition - Vista 32-bit

  Hello

  I need to do a clean install of vista but have lost all of the disks that came with the computer. How do I access the 'Hidden recovery Partition"(AKA a"destructive recovery") to do the clean install of vista?

  Hello

  If the disks provided with the computer, normally you don't have a recovery Partition.

  Makers you give one or the other.

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  IF you have a recovery partition:

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc. according to the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re: How to save the video file to a DVD-R for Equium A200

  I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

  My cursor also has disappered in the suite of windows media, that makes life quite difficult.

  Any ideas?

  Thank you.

  You mean, you want to copy the original DVD movie to HARD drive?
  Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
  I would recommend shrinking the DVD movies using a tool called DVD shrink.
  It would decrease the data and would also copy the content to the HARD drive.

  But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
  Google a bit and you should find many free applications that would help you to do this work.

  Good bye

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

  

  Hope you can help in this case...

  It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

  Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

• How to save the. File of ATN in Photoshop CS5 screen area

  How to save the. File of ATN in Photoshop CS5 screen area

  Hello

  Greetings!

  Open Photoshop.

  Open the Actions panel and select the action that you want to save to the desktop.

  Click the option panel (arrow pointing down with 4 rectangles)

  

  Choose Save Actions from the menu and choose the place like office and save.it

  Concerning

  Jitendra

• I am new to adobe.  Saved gall .pdf for Adobe PANEUSE Xi and can be seen on the screen.  How to save the .pdf on my Flash drive file: L?

  I am new to Adobe.  Have the .pdf file in Adobe Reader Xi and can open and see on my screen.  How to save the .pdf on my Flash Drive file: L?

  I would advise against ever record directly onto a flash drive. For no reason I can understand this often broken leaves files behind.

  Instead, just save it to your desktop and drag it to the usual flash drive (in Windows Explorer or the Finder).

• How to save the .ico format

  How to save the .ico format

  You need plug-ins specific / programs such as Axialis Icon Workshop.

  Mylenium

• How to save the document in integers and not page by page

  How to save the entire document and page by page?

  Hi francoisc2113463,

  If you want to save individual pages of a PDF file, you must use Acrobat (in the Pages pane in the tools Panel, you can use the Extract command). If you do not have Acrobat, feel free to give it a try. You can download a 30 day trial of http://www.adobe.com/products/acrobat.html.

  Best,

  Sara

• I created an animated banner 468 x 60 in edge animate. How to save the image hosted on my desk? (not in HTML)

  I created an animated banner 468 x 60 in edge animate. How to save the image hosted on my desk? (not in HTML)

  Hello

  This feature is not available in Adobe Edge animate. You cannot export as image of the animate edge.

  Publish here describe the options available on board

  M lively help | Publish your content

  Kind regards

  Devendra

• How to save the slide show settings so when I press on Ctrl + enter only what I want?

  How to save the slide show settings so when I press on Ctrl + enter only what I want?

  huh?

  R

  I tested what you gave me there Rob. On my Mac, I have two monitors:

  -Blacken / display slide show on a monitor (the primary monitor, if I move LR in my secondary follow-up, the slide show is still on the first, but the second still works normal with LR just sitting there).

  -If I turn off slide durration I manually advance the slides with the right arrow.

  -I don't have 'Lightroom' (or with my settings current all) text on the screen.

  -Does not repeat itself.

  My Windows machine is not two monitors, but the others work properly...

  In other words, until I thought about it differently. As we seek to change the slideshow settings, I was naturally in the slideshow module. But I then remembered that the interest of the Impromtu Slideshow is that you can view the slide show playback from any module. Once I went back to the library and click Command / Ctrl + Enter, then I saw exactly what you're talking about. Both monitors are blackened, duration of the slide is ignored, etc.

  You know why? As the Impromptu slideshow uses one of the models outside the slideshow Module. Which one? Well, by default +, of course. How do change you that? Right-click (Cmde) slideshow model you prefer to use and select «Use for Impromptu slide show»

• How to save the custom of the user using PHP field?

  Hello!

  I am looking for a way to share specific data to the user between connected users. For example, all participants must know each other IDs (our own system IDs, no ACC).

  Custom user fields seems the best solution for this, but I can't find a way to save one using PHP, while creating the room.

  How to save the custom of the user using PHP field? Or maybe there's best solution to do such things?

  Had, just add the new node to the UserManager collection.

  const USER_MANAGER_COLLECTION = 'UserManager';
  static private $USER_MANAGER_CUSTOM_FIELD_CONFIGURATION = array(
     'accessModel'=>self::ROLE_VIEWER,
     'publishModel'=>self::ROLE_VIEWER,
     'persistItems'=>true,
     'modifyAnyItem'=>false,
     'userDependentItems'=>true,
     'sessionDependentItems'=>false,
     'itemStorageScheme'=>self::STORAGE_SCHEME_MANUAL,
     'allowPrivateMessages'=>true,
     'lazySubscription'=>false,
     'p2pDataMessaging'=>false
   );
   const USER_INVITE_ID_CUSTOM_FIELD = 'inviteId';
   static private function createUserManagerCustomFields($room){
     $account = self::init();
     $collection = self::USER_MANAGER_COLLECTION;
     $account->subscribeCollection($room, $collection);
     $account->createNode($room, $collection, self::USER_INVITE_ID_CUSTOM_FIELD, self::$USER_MANAGER_CUSTOM_FIELD_CONFIGURATION);
   }
  

• How to save the .txt file without opening a dialog box.

  Hello..

  How to save the .txt file without opening a dialog box.

  It is impossible to Flash running in the browser.