HOW TO SCHEDULE A TASK TO RUN EVERY 30 MINUTES WITHOUT USING SCHEDULAR?

Similar Questions

• How to stop disk check to run every time that windows vista starts?

  How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

  Hello

  This tells you how to enable and disable it:

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to find what processes are running on my computer and use it from memory?

  * Original title: find running processes

  How to find what processes are running on my computer and use it from memory?

  You can press Ctrl-Shift-Escape to see which processes are underway and those who is using memory (and how much they use).  Although the memory usage is not as important as how they use lots of CPU, which is what can make your computer slow if there are too many programs use the CPU at the same time.  For memory, even if she says that he uses a lot, an inactive program ' pages on "memory to the hard disk and it frees room for other programs to use, is not as important as the CPU generally (unless you are very very low on memory).

• How to set CC at the beginning of the project without using the CC button?

  How to set CC at the beginning of the project without using the CC button? I want CC which by default and allow users to turn off if they do not need.

  Hi again,

  If you have a Standard Action, then just add a literal Assign cpCmndCC with 1 line. You can also follow what says Lieve, just add a short blade and apply the action on the second slide. Also if you have objects on the slide which advance to the next slide and then not using OnExit measures.

  Thank you!

• Schedule a task to run a procedure at a specific time every day.

  Hello
  I'm working on the database to Oracle 10 g. I am trying to run one every day of the procedure in the annex to be run at 18:45. I used the anonymous block below as suggested in one of the responses to my earlier thread. He runs the script first time about 18:45, and the next day, he runs at midnight. This translates records duplicate being inserted. How can I run every day exactly at 6:45? The code needs to go to production soon and appreciate an early response.
  
  Kind regards
  Naraparaju Raj.
  
  BLOCK:_
  Start
  dbms_job. Submit (work = > my_job,)
  This = > 'Daily_TRAN (sysdate-140, sysdate-139);',
  next_date = > trunc (sysdate) + 1 + (18 * 60 + 45) /(24*60),.
  interval = > 'trunc (sysdate) + 1');
  commit;
  end;
  /

  Hello

  Try this, because range trunc (sysdate) + 1 = tomorrow at 00:00 AM

  The interval is evaluated when the work begins - so... tomorrow at 06:45 must be used

  Start
  dbms_job. Submit (work-online my_job,
  What => 'Daily_TRAN (sysdate-140, sysdate-139);',
  next_date => trunc (sysdate) + 1 +(18*60+45) /(24*60),
  interval => ' trunc (sysdate) + 1 + (18 * 60 + 45) /(24*60)';
  commit;
  end;

• How to create a task that runs once a day, immediately after the opening of session?

  Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.

  The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.

  Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?

  Hello Jeffrey,.

  You can refer to the links below and see if that helps.

  Create a task

  http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx

  Modify a scheduled task

  http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx

  Change an existing task

  http://TechNet.Microsoft.com/en-us/library/cc766442.aspx

  Please write back to us for assistance and we will be happy to help you come.

  Thank you

• Schedule a task to run at a date given by month

  I don't think its possible but hoping that someone will be able to work around the problem.
  
  I rman jobs run every day, to work click on calendar > each week and Monday to Thursday only
  
  Each week, calendar > weekly > Friday only
  
  I want to perform monthly tasks on the Friday or Saturday of the last month. I don't see how I can do this, I can click on every 4 weeks, but after 5-6 months the calendar must be interrupted a few months have 5 weeks. Theres I see nowhere to click "run only the last Saturday of the month.
  
  
  anyone?

  These hours are currently not supported, but will be made available in a future version of Enterprise Manager.

• How to schedule a task

  Hi all
  
  I need to schedule a task in Oracle running on every weekend and present a packaged function.
  
  The wrapped package is used to remove the data in 2 months.
  
  I use Oracle9i version to do this.
  
  Please let me know if anyone has used this type of functionality.
  
  
  Thank you

  Hello

  I forgot that you work in 9i.

  DBMS_SCHEDULER is defined in oracle 10g.

  You must use dbms_job to meet your needs.

  You cannot call a function in dbms_job it returns a value. If you block call pl/sql or a procedure.

  For example

  It is a simple function inside a package.

  SQL> declare
    2    my_job number;
    3  begin
    4    dbms_job.submit(job => my_job,
    5      what => 'DEclare val number; begin select m_pck.m_func into val from dual; end;',
    6      next_date => sysdate+1,
    7      interval => 'trunc(least(
    8  next_day(SYSDATE,''SATURDAY''),
    9  next_day(SYSDATE,''SUNDAY'') ))');
   10  end;
   11  /
  
  PL/SQL procedure successfully completed.
  

  Click on the link: http://www.orafaq.com/node/871

  Twinkle

• DASYLab how to write data to a file every 15 minutes

  Hi all

  I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

  The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

  Thank you

  Write less data in the file that you have collected requires the reduction of certain data.

  There are three techniques to consider.

  With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

  Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

  Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

  Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

  Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

  In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

  Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

  In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

• dbms_scheduler call to run every 5 minutes between 06:00 and 22:00

  I want to set up a call to execute a PL/SQL procedure every 5 minutes between 06:00 and 22:00.
  
  I can do each part 5 minutes like this:
  

  exec dbms_scheduler.create_job                                 -
          (job_name             => 'JOB_1'                       -
          ,job_type             => 'STORED_PROCEDURE'            -
          ,job_action           => 'package_a.procedure_b'       -
          ,number_of_arguments  => 0                             -
          ,start_date           => TRUNC(SYSDATE,'HH')           -
          ,repeat_interval      => 'FREQ=MINUTELY;INTERVAL=5'    -
          ,end_date             => NULL                          -
          ,job_class            => 'DEFAULT_JOB_CLASS'           -
          ,enabled              => TRUE                          -
          ,auto_drop            => TRUE                          -
          ,comments             => 'my comments'                 -
          )

  and the [docs | http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/scheduse.htm#sthref3603] tell me repeat intervals:
  
  
  But I can't work on the syntax to combine the each interval of 5 minutes with the window from 06:00 - 22:00. I have looked at the create_window_syntax, but cannot see how to combine this with the repetition of 5 minutes.
  
  
  Thank you
  
  Ben

  SQL>select * from v$version;
  
  BANNER
  ________________________________________________________________
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  Try an interval like this:

  FREQ=DAILY;BYHOUR=6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22;BYMINUTE=0,5,10,15,20,25,30,35,40,45,50,55
  

  There may be a shorter way to represent, but I think it does what you want. You can use the DBMS_SCHEDULER. Procedure EVALUATE_CALENDAR_STRING to see if it meets your requirements.

  DECLARE
          start_date              TIMESTAMP;
          return_date_after       TIMESTAMP;
          next_run_date           TIMESTAMP;
  BEGIN
          start_date := TRUNC(systimestamp) + 1;
  
          FOR i IN 1 .. 196
          LOOP
                  DBMS_SCHEDULER.EVALUATE_CALENDAR_STRING
                  ( 'FREQ=DAILY;BYHOUR=6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22;BYMINUTE=0,5,10,15,20,25,30,35,40,45,50,55'
                  , start_date
                  , return_date_after
                  , next_run_date
                  );
  
                  DBMS_OUTPUT.PUT_LINE('next_run_date: ' || next_run_date);
                  return_date_after := next_run_date;
          END LOOP;
  END;
  /
  

  I hope this helps!

• How to run the oracle form without using a web browser

  I am a new developer in Oracle Form builder.
  Could someone tell me how can I use oracle without using a web browser?
  
  Bravo,

  N ° Web, since Forms 9i versions, are Web Client and needs an application server to run the forms runtime.

  François

• Satellite L650-1GF - cooling fan runs every 3 minutes

  Last week, I bought a Satellite L650-1GF. Everything is fine except the noise from the cooling fan. Especially because it works almost every minute to cool the carrots. There is an annoying sound hum which takes about 10 seconds and is repeated every 3 minutes approximately.

  I checked with "Speedfan". The temperature of the hearts is fluctuating between 32 and 37 C. And at about 37 ° C, the fan speed to cool the computer.

  Two questions:
  1 is this normal that the cooling fan starts cooling to 37 ° c.
  2. is the annoying noise of the fan normal for this model of Toshiba?

  And what is acceptable, can I find examples to compare with what I feel here somewhere? I saw a lot of cell phones so far, but none of the cooling fans made a buzzing sound like this.

  Kind regards

  Jaco
  Holland

  Hello

  Have you ever tried to change the method of maximum Performance to optimised battery cooling?

  You can do this in Windows power management, but make sure you do this for the current profile of the power.

  Check this box!

• How replicates all records from one table to another table without using expdp, impdp

  Hi I have two database in a database, that I have a table called t1 and another base data, I have the second table .so, my first table have records, that I need to transfer all records second T2 without use of expdp and impdp in every 5 min... what I do

  ??

  The best solution for this scenario is to use Oracle Golden Gate

  However, it requires a license, and you must pay for it.

  If this is not possible, you can create a job scheduler that uses a link DB in order to reproduce the recordings of the target database, but it will take the entire table to the target database and then INSERT AS SELECT truncate the data of the entire table every time that the job is running (because you can't follow only the records that have been changed or modified).

  In addition, read here on the replication of data using materialized views.

• How to identify the siebel custom index created from DB without using siebel tools

  Dear Experts,

  Please let us know how to identify siebel custom indexes that are created directly through DB. We don't are not sure on the customer tables had created indexes.

  Thank you

  Carine Ch

  Hello carine,.

  Thank you for using Oracle communities.

  Custom indexes created without using Siebel tools are not included in the schema definition in the Siebel Repository.

  Just for your information, these indexes are deleted during the upgrade of database. In order to preserve these indexes, add them to the repository Siebel using Siebel Tools.

  Now come to your query you have utility DBCHCK.

  DBCHCK is that Siebel provided utility to compare the logical schema in the Siebel Repository against objects in the physical Oracle database.

  DBCHCK must be run regularly to check the status of the Siebel business, especially after a release.

  DBCHCK can be useful to identify custom index added by the development team, but not added to the repository using Siebel tools.

  You can run it from a server in the environment. A performance by connection to the base. This should be run from the folder siebsrvr

  You can get more information from document following knowledge.

  How the Dictutl and the dbchck to run? (Doc ID 475677.1)

  I hope it helps.

  Best regards

  Chetan

  P.S. If one of the answers was correct or useful, it would be great if you can mark as appropriate help the other identified correctly updated.

• How to record what is happening by the sound card without using the microphone to avoid loss of quality.

  I tried, but there is no "Stereo mix" available options. There is only the (Conexant High Definition Audio) Microphone. It did not work. What I'll do is to buy a DVD for TV (tv Record program) burner and plug the hdmi cable from my computer to the DVD recorder and record what I want. After that, I just rip the audio from the file. I see no other option to do. I use windows vista Home premium.

  I would like to know how I can record the sound that is played by the soundcard using Vista without using the microphone as a source. Let's say the audio is played (audio stream) and I want to record this stream. There are many software that we can download that record what is happening in the microphone. The sound bounces off the speakers to the microphone. But when this happens, you lose a lot of the quality of the audio. So my question is if it is possible to record what is happening to the right of the sound card, before being sent to the sound card in order to avoid the loss of audio quality.

  ==============================
  Movie Maker has an option to record Narration...
  (Tools / tell the chronology). If you select stereo mix
  as the "Audio Input Source", you can save the
  Audio online. Your speakers and microphone are
  not required.

  And... maybe this link will help:

  How to record Internet radio stations on Windows Vista (using Audacity)
  http://www.ehow.com/how_4604071_record-Internet-radio-Windows-Vista.html John Inzer - MS - MVP - digital media experience