How to secure wireless network with a computer running XP and one running Vista

Similar Questions

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• set up a wireless network with 2 iMacs

  How to set up a wireless network with 2 iMacs?

  Need more information. Writing an effective communities of Apple Support question.

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• How can I share network between the computer laptop windows 7 into a window of 8 tab?

  How can I share network between the computer laptop windows 7 into a window of 8 tab?

  Hi HollyMcColl,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Using Windows 8 Surface RT?

  Note: You can create a Windows RT PC home group, but you can join one.

  I suggest you to consult the help articles and check if it helps.

  A Wi - Fi & networking

  http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

  Share files on a home network or your Surface

  http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

  Share files and folders on a network or shared PC

  http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

  Get back to us if you need further assistance on Windows 8. We will be happy to help you.

• No wireless networks detected even they are available and wifi is turned on

  Hi all

  I can't see the wireless networks available even they are available, and always I see red x mark on wirelss icon beside the clock.

  laptop: HP ProBook s 4540

  OS: windows 7 Ultimate

  WiFi adapter: Ralink RT3290 802.11bgn Wi - Fi adapter

  I installed the latest update by connecting computer laptop eithernet cable and search launch legacy manager, alwas says:

  "the best driver for your device software is up-to-date.

  Please any idea of help.

  Thanks in advance.

  Thank you very much for your quick response, actually this problem is solved by changing the country / region of the Device Manager wifi adapter, I tried more region until I had access to available networks.
  
  Thanks again

• On windows xp, wireless network settings icon does not appear and I can't set up my new wireless connection?

  I got a new modem from AT & T because of my Wi - Fi connection failed yesterday. I have new installation internet connection and attempted to establish a wireless connection but the wireless network does not appear. I went under network settings, and there is no icon of wireless network parameters? I don't know what it takes at this point or how can configure my WiFi, that's why I ordered the new modem.

  Hi Cindy20011,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• How can I take pictures with a regular usb camera and labwindows

  How can I take pictures with a regular usb camera and labwindows

  Hello

  What do you mean "ordinary USB camera? It's a Vision camera with a communication based on the API Vision camera or a 3rd party (such as a webcam)?

  In the latter case, you may need to consult the documentation of the manufacturer, it should be sent with her library (C DLL, ActiveX automation, .NET assembly) with functions to communicate with drivers.

  Best regards

• I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites?

  I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites? This is so I can keep my ones that are free for personal projects but also so they can pay for their own accommodation. I'm happy to put everything to them but don't know what to do.

  Hello

  You can use their IDs of BC and use them, which to publish the site will be under their account.

  Please change the login of BC's Edit > preferences > Publish > switch accounts, for Mac, there Adobe Muse > preferences

  Thank you

  Sanjit

• I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The connection disconnects regularly "try to reconnect 1 20.

  Hello

  I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The regular connection disconnects after a few minutes, then displays the window pop-up "try to reconnect 1 20. It always with success reconnects itself during this first attempt. During the time when the connection is lost, the internet connection is fine, in other words, I could use my cell phone to browse the internet.
  Any ideas what could be causing this?
  Thank you.
  original title: remote to vista win7 desktop keeps losing connection and reconnection se

  Hello

  Follow the steps in troubleshooting section and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  The problems of desktop remotely

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

• How can I make my PC OS meets the requirements and get windows vista to be taken in charge for the installation of adobe lightroom 6?

  How can I make my PC OS meets the requirements and get windows vista to be taken in charge for the installation of adobe lightroom 6?

  Well, I'm not really sure of Windows Vista.

  You can contact customer service for additional troubleshooting.