How to see the compression quality of photos and how to change it?

Similar Questions

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

  With the help of PSE v14 when PSE v10 is still in my iMac with iPhoto and when I click on a photo and click on change, he wants to keep opening PSE v10.  I just installed a temporary version of PSE v14 and would really like to use to see want I can do.

  You open iPhoto or organizer? If the latter; Check your configuration. During your installation, make sure you select the application, and not an alias (shortcut). Go to this link.

  PSE14 as an external editor

• Cannot see the preview of my photos taken with the Sony A7R II even after software update.

  Even after the the Lightroom update, I still don't see the preview of my photos taken with the Sony A7R II even after software update. Need help please.

  

  Hi Joas,

  Sony A7R II files are not supported in Lightroom 5.

  You need at least version 6.1.1 or CC2015.1.1 to access these files: supported by Adobe Camera Raw devices

  You can upgrade your program of Lightroom or Adobe DNG Converter allows you to convert raw files to DNG and import them into Lightroom.

  Kind regards

  Claes

• How to change the font size of the copyright on my photos and make so comment

  How to change the font size of the copyright on my photos and make so comment

  Open the watermark editor (Menu > edit > modify watermarks...)

  Select the watermark to delete in the drop-down list box.

  

  Click on the drop down a second time.

  Choose the option 'delete '.

  

• Items purchased and it appears I have got only the part of editing photos and movies. How can I get part 2 of my order?

  Items purchased and it appears I have got only the part of editing photos and movies. How can I get part 2 of my order?

  Please post related queries from Photoshop Elements

  http://forums.Adobe.com/community/photoshop_elements

• PLEASE, I BEG YOU! How can I have a label dynamically see the current user loggedin FirstName and LastName in my database?

  I have a HBox that becomes visible when a user is valid. The HBox contains a logout button, and a label. How can I get the label dynamically see the current user loggedin FirstName and LastName in my database? Below, I have included my element HBox and ColdFusion. ANY helpwould be appreciated!
  
  
  
  < < < < < < MY component LoginHBox.mxml starts HERE > > > > > > >
  < mx:HBox
  ' xmlns:MX =' http://www.adobe.com/2006/mxml '
  Width = '100% '.
  height = "28".
  horizontalAlign = "right."
  verticalAlign = "middle".
  paddingRight = "10" >
  
  "" < mx:Script source = "... / actionScript/logout.as" / >
  
  <!-App connects to ColdFusion using Flash Remoting STARTS->
  < mx:RemoteObject
  ID = "cfService_LoginCFC".
  destination = "ColdFusion".
  source="WebsiteApplication.CFC.LoginCFC"/ >
  <!-App connects to ColdFusion using Flash Remoting END->
  
  < mx:Label id = "welcomeLabel".
  Text = "Welcome"... "/ > < < < < HOW can I get the text dynamically see the users registered in FirstName and LastName?
  
  <! - logoutResultHandler() of the points of function in the file logout.as - >
  < mx:Button id = "logoutButton.
  label = "Log" Out
  Click = "logoutResultHandler ()" / >
  
  < / mx:HBox >
  < < < < < < MY component LoginHBox.mxml ends HERE > > > > > > >
  
  
  
  < < < < < < MY component LoginCFC.cfc starts HERE > > > > > > >
  < cfproperty >
  
  <!-function loginUser STARTS->
  < name cffunction = "loginUser" access = "remote" returntype = "WebsiteApplication.cfc.UserCFC" >
  < cfargument = 'user name' name type = "string" required = "true" >
  < name cfargument = "password" type = "string" required = "true" >
  
  <!-the default user is not logged in->
  < cfset var user = createObject ("component", "UserCFC") >
  
  < cfquery name = "loginQuery" dataSource = "TheChurchOnFire" >
  SELECT the name of user, password, AccessLevelID, FirstName, LastName
  FROM dbo. MembershipInfo
  WHERE
  Username = "#username #
  AND password = ' #password #
  < / cfquery >
  <!-the cfif instructionsuivante is absolutely fundamental in the achievement of the
  fully functional authentication-> process
  < cfif EQ loginQuery.Username ' #username # ' loginQuery.Password AND EQ ' #password # ' >
  < cfset user .loggedin = true >
  < cfset user .username = "#username #" >
  < cfset user .roles = "#loginQuery.AccessLevelID #" >
  < cfreturn user >
  < cfelseif > #username # EQ 'username' AND #password # EQ 'password '.
  < cfset user .loggedin = true >
  < cfset user .username = "#username #" >
  < cfset user .roles = "6" >
  < cfreturn user >
  < cfelse >
  < cfreturn user >
  < / cfif >
  
  < / cffunction >
  <! - function loginUser ENDS - >
  
  < / cfproperty >
  < < < < < < MY component LoginCFC.cfc ends HERE > > > > > > >
  
  Thank you
  
  John
  

  I finally thought to it! PRAISE BE TO GOD!

  I had to add...

  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';

  .. .for my loginResultHandler.

  function loginResultHandler
  private void loginResultHandler(event:ResultEvent):void
  {
  currentUser = event.result as a user;
  If (currentUser.loggedIn)
  {
  If successful login
  If (currentUser.roles == '5')
  {
  this.currentState = 'Youth';
  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';
  }
  Else if (currentUser.roles == '4')
  {
  this.currentState = 'Member';
  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';
  }
  Else if (currentUser.roles == '3')
  {
  this.currentState = 'PowerMember';
  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';
  }
  Else if (currentUser.roles == '2')
  {
  this.currentState = 'AssistantAdministrator';
  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';
  }
  Else if (currentUser.roles == '1')
  {
  this.currentState = 'SeniorAdministrator';
  welcomeLabel.text ='Welcome, you are currently logged in as + currentUser.fullname + '!';
  }
  on the other
  {
  currentUser.roles == "6";
  this.currentState = 'Visitor';
  welcomeLabel.text = 'Welcome, you are currently logged in as visitor!';
  }
  }
  on the other
  {
  If unsuccessful login
  Alert.Show ("unsuccessful Login", "Server authentication");
  }
  }

  Michael_ramirez44 thanks for your help!

  John

• I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

  The difference between the raw edition photo and editing a PSD is that the PSD has black points and white pinned to the visible pixel values, the raw photo has still "headroom" with values of pixel darker than black visible and brighter than white, so when you export the raw file , there may be details that have improved (or obscured if it was another type of image) of the perception and mapping of the Compensation of the black spot on the final color profile.

  This means not PS is better or LR is lower, it is enough for you to go to a different type of image.  If you don't have PS to do final Assembly, you can probably do the same thing by exporting the raw in a 16 bit ProPhotoRGB TIF file, re-import this TIF and then set it LR, possibly using the tone curve to make the pitch black dark areas.

• Can I save the Organizer, move my photos and always access to post-secondary studies?

  I backed up my catalog to an external hard drive last night and there were about 20 disconnected files.  I wasn't able to locate so I allowed the back upward to continue without them.  Do you know what are the consequences for that?

  In addition, many of my pictures are on my C drive, and several are on the external hard drive.  My catalogue included photos of these two places. When I move the rest of my photos from the C drive of my computer to the external hard drive, the catalogue will always be able to access or will I have to backup everything again?

  My goal is to free up space on my computer, so PSE will stop freezing.  I am interested in fact at this moment can enter all my photos in the organizer and labeled.  I'll change them later I have started creating digital scrapbook pages.

  Can someone tell me if how I go about this is correct?

  Thank you

  Thanks Ken.  I have supported all my external hard drive, but now I think I rather just move everything there and reminds me of my photos of the HD post to free up space on my C drive.  Is this possible?

  Date: Wednesday, February 22, 2012 15:55:14-0700

  From: [email protected]

  To: [email protected]

  Topic: Can I save the Organizer, move my photos and always access to post-secondary studies?

  Re: Can I save the Organizer, move my photos and always access to post-secondary studies?

  created by photodrawken in Photoshop Elements - discover complete discussion

  PSE allows you to back up your catalog, actual photos as well as the catalog (database) is saved. When you restore from a backup, you can specify where inbound pictures will be placed. Ken

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4223403#4223403

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4223403#4223403. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in Photoshop Elements, by e-mail, or to the Adobe Forums

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• With a high resolution, the proportions of my photos and slides is false.

  With a high resolution, the proportions of my photos and slides is false. To show the ration of good appearance, got very low resolution. I searched in the vein of a cure, but certainly there must be a.

  Hello

  1. What is the native resolution of the image?

  2. What if this problem occurs with all the pictures?

  These problems usually occur due to the low native resolution. To change the native resolution of the image, you can use pictures digital high resolution.

  Hope the information is useful.

• You come to buy, see the old trial version free and said I have to buy again once

  You come to buy, see the old trial version free and said I have to buy again once

  Hello

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Under XP, when I try to install the program screen flash BACK and trying to change back, but then return to the windows form.

  When I run the Setup in the program screen flash backs and trying to change back, but then return to the windows form.

  * original title - back program will not be run. *

  How old is this program and what is his name?  If you give us the name of the program someone read here who have experience with the peculiarities of the program might be able to provide more help.

  Open a command prompt, and then try running Setup from the command prompt.  To start a command prompt, type CMD in the box run from the start menu and press or click OK .  At the command prompt, you can use the CD command to navigate to the CD, or you can run the Setup program by using the full path to the Setup program, for example:

  x:\Install.exe

  where x is the CD drive letter.

  John

• Changed the password on Windows Live and it has changed my password:)

  OT: I'm sorry, I just got an answer that is not accurate. Windows Live and Hotmail ARE THE SAME! BECAUSE WHEN YOU CHANGE THE PASSWORD THAT IT MODIFIES THE OTHER. I was told that it is 2 different passwords?
  Hi all

  I wanted to see if Windows Live and Hotmail was the same thing, and someone told me that they are 2 different passwords and not the same thing.

  I changed the password on Windows Live and it has changed my password:)

  Thank you, Angelo

  Hi Angeloecheverra,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15

• How to make the high quality look smooth and not grainy photo?

  I uploaded a picture of my camera and when I change it on Photoshop, it seems pretty grainy.
  I'm doing an assignment for my photography class where I have to imitate the project of photographer and I chose this picture http://ic.pics.livejournal.com/_pinkpornstar_/1198725/322258/322258_original.jpg.

  However, once I took the picture, I have now is quite high in quality and import it in Photoshop, I can't find a way to make it more clear than "professional" photos out there!

  I know that if I Zoom, it becomes less grainy, but even after I record and zoom, the picture is still not as smooth as the one I aim.

  Is it because of the settings that I used while taking the photo?

  PS: Sorry for this fundamental issue, I'm a noob to this.

  JPEG quality is never (or not as high as possible). Shoot raw and process in Camera Raw, where you have total control over all other treatment and noise reduction settings.

  JPEGs are self-treated behind doors closed, highly compressed and throw large amounts of data.

• Download 12.5.1.21 and lots of photos of work in the tabs of the ARTIST do not show the artist, only a graphic of a microphone. I had before the artist with their photos, and now I can't. How can we get them. ?

  Before when I have to click on the 'artists', all my artist art 12.5.1 on the sidebar appears. Now most of the artists album covers appear only a chart from a microphone in light pink, blue and clear.  However, when I click on 'albums', all album covers are not displayed correctly.  Review of my library, all the artwork for each song, and the album is installed correctly.   How to get the picture of the work on the 'artists' on the sidebar tab?  How can I do to reinstall the work of artists.  Help!

  Richard

  Yours is probably the clearest explanation of the issue of iTunes with the "artists". Could you put a picture of the "artist's impression" so that we can see the problem?

  (I guess that other "views" - recently added, Albums, songs and Genres - work very well.

  Thank you!