How to select a different language during the installation of Vista on Satellite L30?

Similar Questions

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Qosmio G30-153: no drivers were found during the installation of Vista

  Hi I tried to install Vista on my computer, but there are some bad things. I just insert the Vista CD and restart my machine.

  Vista has started to install and I have reached the point where Vista should find the drivers to choose, but its tells me no drivers were found.

  I took it to the Agency in Syria and they told me that this (Qosmio G30-153) machine comes with vista only.
  If you have upgraded from XP applies to the Qosmio only.

  I think there is another problem, but they could not solve it because I told them when I go to the configuration of the system, I found the drivers, but the names are different.
  Driver (C) named Raid 0, but the names of the drivers D Jbod and I think they should be eponymous.

  If they are different name, but they don know what I mean.
  do you know how to change the name of the pilots and why they are different.

  I hope you can help me and I will answer you on my email address if you don't mind my ([email protected]) is

  Thanks alotttttttt Byeeeeeeeeeeeeeeeee

  Here is no problem at all. Visit the Toshiba support under http://eu.computers.toshiba-europe.com page

  You will find RAID driver. Please download this driver and use it for the installation of the OS. Unmanned RAID HDD is not visible, but after the hard disks in RAID driver loading will be visible and you can continue the installation of the OS. RAID driver can be saved to USB.

  If you have any other questions, please write again.

  Bye and good luck!

• During the installation of Vista SP2 (KB948465) on a laptop, I get error code 800F082C.

  There is very little information on the Internet for this error code. The OS is Vista Ultimate on a Dell Precision laptop. The machine is a member of a domain AD running on SBS2008.

  Hi Homechicken,

  Welcome to Microsoft Vista answers Forum!

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the System Update Readiness Tool for Windows

  Vista and Windows Server 2008: http://support.microsoft.com/default.aspx/kb/947821

  No matter what field of issues; I suggest you contact the TechNet forum for further assistance. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Different languages of the installation of adobe, now I can't download the software

  I installed adobe photoshop in Italian because I'm used to use it I have this language, but I have mounted illustrator, indesign, etc. in English (because I whant to be able to use the online tutorial), so now I can update photoshop because he says that I never installed it! How can I solve this?

  Change the language to Italian on your creative cloud desktop, then it will be photoshop as installed

• How to apply RUP6 (patch 6728000) during the installation of the single node?

  Dear
  
  On single node configuration, we have installed Oracle Apps R12.0.4. Now I need to apply RUP6 (patch 6728000). In what order should I apply the patch? According to my knowledge "u*.drv" type patches must be applied to both AS & DB level. I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process. After that, I have to apply this hotfix on DB also stop DB &?
  
  Need help!
  
  Concerning

  Naya,

  I thought to do like this covered, Source Apps*.env, AS stop, mode adadmin (interview), adpatch, startAS. But DB must be up & running in this process.

  Fix.

  After that, I stop DB & also the application of this fix on DB?

  No, because you have already applied the patch as a user applmgr and already patched the application layer as well as the database layer. Thus, simply disable maintenance mode, start the services application, and access the application.

  Make sure that you follow all the steps in the Readme of the patch and (Note: 743368.1 - Oracle E-Business Suite Release Update Pack Readme, release 12.0.6).)

• During the installation of Vista Service Pack 2 I get the following error message: ERROR_INVALID_PARAMETER (0 x 80070057)

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  80070057 ERROR_INVALID_PARAMENTER - E_INVALIDARG

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  Resources:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• Qosmio G35-AV600: blue screen during the installation of Vista?

  Hello

  I have a G35-AV600 one I am trying to install windows vista.
  I followed all the instructions for the driver raid and all with pure install.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  I know that some people had the same problem since they were posted here but no solutions have been posted.
  Please if you have an idea how to solve this problem, help me, I'm desperate.

  Thank you.

  Hello

  We need more information to try to help you.

  As a first step:
  Have you upgraded your Qosmio G35 to be a Vista capable?

  BIOS available for download from the Toshiba Web Site:

  Version 3.30 25/01/2007
  Changed the BIOS to be compatible with Windows Vista.
  Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
  Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
  FIX: A smart card containing a TI controller is always set to disabled.
  Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
  Fixed: Ensure a remote to work Express Media Player.
  Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
  Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
  It is the first version of BIOS for PQG33U models.
  This BIOS supports Windows Vista and XP.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  Would you please, let us know what is the error message when you have a blue screen?
  Report any information given at the bottom of the blue screen.

  Francisco

• Problems during the installation of windows on Satellite L40

  my laptop toshiba satellite L40
  model No. PSL4CL-001001
  series X7061289R

  while I have install windows xp, it says that my hard drive not found...
  for windows vista, I also facing the same problem...
  I know that I have I need of the driver for this laptop...
  but where can I found it?

  I have not the driver or the ultilities... because his second hand trade...
  can anyone giv help me?

  Thank you...

  OK, first, all drivers and utilities you need can be found here: http://eu.computers.toshiba-europe.com (Support & downloads). Choose your laptop computer and operating system.

  Windows tells you, it does not find your HARD drive because of the lack of SATA drivers. They are in the Matrix Storage Manager intel, which can be downloaded on the link above.

  How to use this forum just use search function driver, but you have two options. Put them on floppy or integrate them into your installation via the tool called nlite disc.

• Hang-up system to 76% during the installation of Vista Service Pack 1, 3/3.

  Hello!  I installed Vista SP1 last night and everything seemed to go well, except the system stagnates at 76% this morning at 04:00 (it is now 21:00).  I have the following message is displayed on my screen "installation of the Service Pack: step 3 3-76% complete.".  Do not turn off computer. "What should I do?  Help, please! and thank you!

  Finally, you will need to turn off if she does not finish install.

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  You then can he try again, or try a direct download.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Vista 32-bit SP1

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Vista SP1 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  But you send messages in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A100: Can WXP during the installation of Vista - I use Vista drivers

  Hello

  Will really appreciate if a member of the community could help sort my confusion...

  I had to reinstall Windows with XP SP3 in place and place of Vista the A100 was delivered with. I now need some drivers (Lan, WiFi, Bluetooth, USB) and wanted to know if I can still use the Vista drivers for the A100 (PSAA8E) available on the Toshiba support site, or should I look XP compatible drivers in other places.

  In the hope of receiving help from you guys.

  Thank you
  Gerard

  Hello

  If you have installed Win XP you use drivers designed for Win XP and not Vista.
  Win XP drivers do NOT work on Vista OS.

  In order to check the Toshiba page if some XP drivers are available.
  If you find not all drivers XP then you have to collect the XP drivers to your own hand

  But I m sure that some XP drivers are on the European driver Toshiba page.

  Big names

• Computer froze during the installation of Vista SP1

  Attempmted install Vista SP1 after download and automatically restarts the computer froze. When I hard it boot it starts and then I get a blue screen that says a problem has been detected and Windows has shut down. Technical information reads "STOP: 0x0000c1f5 (0x00000000, 0x00000000, 0x00000000, oxoooooooo).»
  I tried to start in safe mode, but get the same blue screen and message.

  gmc1963,
  Here are a few articles dealing with this error code and the possible solutions for them.  Let us know if they are able to solve the problem or not.

  KB946084

  KB970101

  KB958069 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error code during the installation of Vista SP1 - HELP

  Here is the error code I get when I try to install the Vista SP1: 8007371B. Any ideas?

  Check to see if that helps... http://support.Microsoft.com/kb/947366

  or try to "Start - Run - type CMD enter."

  SFC/scannow

  Or search for SP1 prerequisites cordially, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."