How to select a specific channel in another file?

Similar Questions

• How to select a specific column in a bean method?

  Hey everybody,

  I am trying to select a specific column in my table of the adf so that I can hightlight those I can after that, with a pod of method that only one game from another table. I use JDeveloper 12.1.2.0.0.

  Here is my table at the moment (this is a static list that Alejandro and Timo helped me to create, thanks to them once again!):

  < af:table value = "#{bindings." Var Anos1.collectionModel}"="row ".

  lines = ' #{bindings. " Anos1.rangeSize}.

  emptyText = "#{bindings." Anos1.viewable? "{'No data to display.': 'Access Denied.'}".

  rowBandingInterval = '0' fetchSize = "#{bindings." Anos1.rangeSize}.

  filterModel = "#{bindings." Anos1Query.queryDescriptor}.

  queryListener = ' #{bindings. " Anos1Query.processQuery}.

  filterVisible = 'false' varStatus = 'vs' id = 't5 '.

  styleClass = "AFStretchWidth" columnSelection = "multiple".

  inlineStyle = "" max-width: 100%; "columnStretching ="multiple""

  columnSelectionListener = "#{ControlBean.onAnoColumnSelect} '"

  disableColumnReordering = 'true '.

  Binding = "#{ControlBean.dimAnos}" >

  < af:column sortProperty = "#{bindings." Anos1.hints.A2011.name}.

  filterable = "true" sortable = "false".

  headerText = "2011".

  ID = "c54" width = "16%" >

  < af:outputText value = "#{rank." A2011}.

  shortDesc = "#{bindings." Anos1.hints.A2011.ToolTip}.

  ID = "ot54" >

  < af:convertNumber groupingUsed = "false".

  model = ' #{bindings. " Anos1.hints.A2011.format}"/ >

  < / af:outputText >

  < / af:column >

  < af:column sortProperty = "#{bindings." Anos1.hints.A2012.name}.

  filterable = "true" sortable = "false".

  headerText = "2012."

  ID = "c55" width = "16%" >

  < af:outputText value = "#{rank." A2012}.

  shortDesc = "#{bindings." Anos1.hints.A2012.ToolTip}.

  ID = "ot55" >

  < af:convertNumber groupingUsed = "false".

  model = ' #{bindings. " Anos1.hints.A2012.format}"/ >

  < / af:outputText >

  < / af:column >

  < af:column sortProperty = "#{bindings." Anos1.hints.A2013.name}.

  filterable = "true" sortable = "false".

  headerText = "2013".

  ID = "c56" width = "16%" >

  < af:outputText value = "#{rank." A2013}.

  shortDesc = "#{bindings." Anos1.hints.A2013.ToolTip}.

  ID = "ot56" >

  < af:convertNumber groupingUsed = "false".

  model = ' #{bindings. " Anos1.hints.A2013.format}"/ >

  < / af:outputText >

  < / af:column >

  < / af:table >

  I deleted some of the columns, because they are all equal, and in doing so, you have fewer problems in reading.

  In my method, I have a matchEm, but I'm trying to select a column using this line:

  dimAnos.setColumnSelection ("A2012");

  dimAnos is the link to my table Anos (years in Portuguese). I even tried other values FRO the columnSelection but I just couldn't do it selected. I'm doing something wrong?

  Please help me or give me an idea how I can do this.

  Kind regards

  Frederico.

  Hi Frederico,

  The setColumnSelection method is intended to define whether or not your table supports the selection of columns. It does not select the column. In order to select the column, you must set the attribute column selected to true. So I don't know if its an option for you, but you can create a link to all the columns that you have in you bean and then call the method A2012.setSelected (true) and then add a partial target table for makes re and display the selected column.

  Hope this helps

• Plugin Automation: how to select a spot channel when 2 channels have the same name?

  I have a CMYK document open in photoshop. In the "LAYERS" Panel, I just added 2 tones with the same name "color 1" Sport.

  I click on the spot channel to select, the "Listener" plugin will be released a few c ++ code like below:

  
  SPErr PlayeventSelect(/*your parameters go here*/void)
  {
  Result PIActionDescriptor = NULL;
  DescriptorTypeID runtimeKeyID;
  DescriptorTypeID runtimeTypeID;
  DescriptorTypeID runtimeObjID;
  DescriptorTypeID runtimeEnumID;
  DescriptorTypeID runtimeClassID;
  DescriptorTypeID runtimePropID;
  DescriptorTypeID runtimeUnitID;
  SPErr error = kSPNoError;
  Move it to the top of the routine!
  PIActionDescriptor desc0000000000003980 = NULL;

  error = sPSActionDescriptor-> Make (& desc0000000000003980);
  If (error) goto returnError;

  Move it to the top of the routine!
  PIActionReference ref0000000000001A48 = NULL;
  error = sPSActionReference-> Make (& ref0000000000001A48);
  If (error) goto returnError;

  error = sPSActionReference-> PutName (ref0000000000001A48, classChannel, "1 Spot color");
  If (error) goto returnError;

  error = sPSActionDescriptor-> PutReference (desc0000000000003980, keyNull, ref0000000000001A48);
  If (error) goto returnError;

  error = sPSActionControl-> Play (& result, eventSelect, desc0000000000003980, plugInDialogSilent);
  If (error) goto returnError;

  returnError:
  If (result! = NULL) sPSActionDescriptor-> Free (result);
  If (desc0000000000003980! = NULL) sPSActionDescriptor-> Free (desc0000000000003980).
  If (ref0000000000001A48! = NULL) sPSActionReference-> Free (ref0000000000001A48).
  error return;
  }

  -------------------------------------------

  You can see "PutName" adds the name of the channel 'Spot color 1' to make reference to and I think it will not work properly if I add such a code for my project as the PS can not differentiate the 2 channels than by their name. Can someone tell me if there is another method of selecting channel spot? Thanks in advance.

  Hello

  Here's something tht docs, you may find useful.

  Index of Tryusing instead of name:

  SPAPI OSErr (*)	( PutIndex ) (RefPIActionReference , DescriptorClassIDdesiredClass, uint32 value)
  	Puts an index into a reference ( formIndex ) as well as the class desired for reference.

  Unfortunately I do not have C++ here to try I used just definition of documentation.

  Hope this helps.

  Kind regards

  Momir Zecevic

  ARS media

  www.Arsmedia.TV

• How to select a specific portion of the worksheet?

  Hello

  I have 8 sensor of color and form that I'm getting the information as shown below.

  /S0 = 0 s1 = s2 2 = 4

  /////////////////////Sensor 6////////////////////// /////////////
  / Sensor_6_rot? 74.08
  / Sensor_6_blau? 18.13
  / Sensor_6_gruen? 0.00
  /S0 = 1 s1 = s2 2 = 4
  /////////////////////Sensor 7////////////////////// /////////////
  / Sensor_7_rot? 68,92
  / Sensor_7_blau? 12.19
  / Sensor_7_gruen? 13.63
  /S0 = 0 s1 = s2 0 = 0
  /////////////////////Sensor 0////////////////////// /////////////
  / Sensor_0_rot? 63.72
  / Sensor_0_blau? 14.06
  / Sensor_0_gruen? 13.14
  /S0 = 1 s1 = s2 0 = 0
  /////////////////////Sensor 1////////////////////// /////////////
  / Sensor_1_rot? 55.20
  / Sensor_1_blau? 33,52
  / Sensor_1_gruen? 19.53
  /S0 = 0 s1 = s2 2 = 0
  /////////////////////Sensor 2////////////////////// /////////////
  / Sensor_2_rot? 70,65
  / Sensor_2_blau? 16.57
  / Sensor_2_gruen? 12 h 30
  /S0 = 1 s1 = s2 2 = 0
  /////////////////////Sensor 3////////////////////// /////////////
  / Sensor_3_rot? 67.94
  / Sensor_3_blau? 14.50
  / Sensor_3_gruen? 12.23
  /S0 = 0 s1 = s2 0 = 4
  /////////////////////Sensor 4////////////////////// /////////////
  / Sensor_4_rot? 59,74
  / Sensor_4_blau? 10.83
  / Sensor_4_gruen? 0.00
  /S0 = 1 s1 = s2 0 = 4
  /////////////////////Sensor 5////////////////////// /////////////
  / Sensor_5_rot? 61,77
  / Sensor_5_blau? 22.86

  Sensor_5_gruen? 12.90

  I wanted to ask you how can I select for example sensor 1 and all its data separately and even for the other sensor.

  I want to compare the decay all value Blau and Lee for detect color.

  Please guide me.

  Thank you very much in advance youv.

  Kind regards

  Akki.

  Hi Stephanie,.

  could you suggest me

  You can:

  -Remove question marks in your input string to simplify the analysis of the chain subsequently

  -use the sensor as a parameter instead of string constants number purely

  -

• APEX 5 tabs containing - how to select a specific tab

  Hi all

  At APEX 5.0, I have a page with a tab container model.

  Under certain conditions in the page based on the interaction of the user, I want to force a specific TAB to show/getting to the point and hide that is active.

  Basically, I want to replicate the standard click on this TAB event automatically.

  Is it possible by URL, javascript? I can't find a valid solution.

  Thank you

  Mario Rui Romero

  Hello

  I found the way to control the tab selected on the container of tabs (region selector display) to the loading of the page or refresh.

  Just replace the standard session setting that stores which is the active tab. This parameter is used by the standard "Remember active tab" option.

  So if we assign the value of the tab, we want to load/refresh of page that we will be able to open the tab we want to automatically show.

  I used this command:

  sessionStorage.setItem (".99999.100.Tabs.activeTab", "#CR_SR_ArticleTab");

  99999 is application id and page id 100.

  And that's all!

  Hope this helps,

  Best regards

  Tino.

• Virtual WiFi - how to select a specific WiFi adapter as "hostednetwork.

  Is it possible to choose on which adapter wifi will be created the hosted virtual network?  Because I use an external USB adapter with antenna stronger but windows prefer the interneal. I use both of them which makes it more difficult, if this isn't the case, I might just turn it off, you will choose the externeal automatically... one advises?  Thank you!

  I tried to do the same thing, it's my solution.

  Open Notepad and type this in, his replacement by Wi - Fi for the name of your card, let him «»

  netsh interface set interface name = 'WiFi' admin = off
  netsh wlan set hostednetwork mode = allow
  netsh wlan start hostednetwork
  netsh interface set interface name = 'WiFi' admin = on

  Save this as a batch file, so put it in any name you want and put .bat on the end.

  Run as administrator every time batch file or it won't work.

  This should do what you asked

  In addition, if you want to stop the network when you want to then add this below the last line.

  pause

  netsh wlan hostednetwork stop

  This will leave the prompt command open and waiting for any key be pressed to execute the command.

  Don't forget to share the connection of the adapter that has internet hosted network or the devices that you connect will not have access to the internet.

• How to copy and paste it into another file to send by email?

  HOW TO COPY OR CUT AND PASTE, SEND AND EMAIL?

  either unique or overall.

  to highlight point left click and drag right click-copy-or select right click Copy-go to the mail and right click - click on paste.

• How can I send my scans to another file

  OfficeJet 6700, Windows XP.

  When I scan something, the results are always sent to "My Documents" on my computer. I want to send them in the folder titled "My Scans". How do I do that?

  Can I appoint the scans before being sent? Currently they are automatically named Scan 0001 or 0002 and so on >

  Hello

  You can set a different prefix instead of Scan, then you must rename the files as well you can configure the software to display a record as dialogue during the scan job.

  To change the settings, open the HP software (start > all programs > HP > HP Officejet 6700 > click on your printer icon).

  Click on scan a Document or Photo.

  Select the shortcut to scan, generally, you use and click Advanced settings.

  The Destination tab.

  Select the folder target under the saving location.

  You can check the box next to the display dialog box save slot, then you will be provided with a file name option in the analysis.

  Shlomi

• How do I get the content from another file and paste it into the active document instead of certain string?

  I am newbie in indesign scripting of animals. So I apologize because I couldn't post my essays.

  Objective:
  I have a .indd document which will be a figure of legend, label etc. I need to copy the content (a figure that is editable) else file indd of this document where the tag figure exists.

  For example:
  Sample.indd

  Some text Fig.1.1 caption some text 

  I need to copy the contents of figure1.indd and paste in the document sample.indd where Fig.1.1 string exist and so forth. Now I do it manually. But am supposed to automate this process.

  So, I need some hint how to do it using extendscript?

  I found something like below, to do so, but I have no idea to develop it further and also do not know if this approach is correct my results. Please help me

  myDocument=app.open(File("file.indd"),false); //opening a file to get the content without showing. 
  myDocument.pages.item(0).textFrames.item(0).contents="some text"; //here I could set the content but I don't knw how to get the content 
  // ?????? Then I have to paste the content into active document.
  
  

  Try this test nicely to your and end, hope this will help you.

  var myDoc = File("/D/Sample.indd");//Figure File
  var myFigDoc = File("/D/Figure.indd");//Destination File
  app.open(File(myFigDoc));
  app.activeDocument.pageItems.everyItem().select();
  myObj = app.selection;
  var myGroup = app.activeWindow.activePage.groups.add(myObj);//Grouping the objects
  myGroup.select();
  app.copy();
  app.open(File(myDoc));
  app.findGrepPreferences = app.changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "Fig 1.1";//Figure caption text
  app.findGrepPreferences.appliedParagraphStyle = "FigureCaption";//Figure Caption Style
  myFinds = app.activeDocument.findGrep();
  for(var i=0;i		   

• Select a physical channel control NIDAQmx programmatically

  Does anyone know how to select a physical channel control NIDAQmx programmatically.  Especially if the user has completed a column in table table with 1,3,4, for example, I want to select WLS-9163/ai0 WLS-9163/ai2 and WLS-9163/ai3 in control of physical channel, place these choices in a table and begin my task of acquisition by the said table.

  Thank you very much.

  Terry,

  This will give you a picture of the analog input channels (I. PhysicalChans):

  

  And the name of the product (Type).

  Is that what you're looking for?

  Steve

• How to move a specific tablespace data file from one directory to another

  Database: 10.2.0.1
  OS: generic
  Description of the problem: how to move a specific tablespace data file of one directory to another account of the database that is on the installer of Oracle Dataguard
  
  * Oracle is working on this issue, but at the same time opens the topic community so that community members can add their views, experience, or knowledge. This will strengthen again all the knowledge bases, including My Oracle Support and My Oracle Support Communities *.
  
  Published by: ram_orcl on August 16, 2010 21:21

  Dear ram_orcl,

  Please follow the procedures here;

  http://download-UK.Oracle.com/docs/CD/B19306_01/server.102/b14239/manage_ps.htm#i1034172

  8.3.4 Renaming a Datafile in the Primary Database
  
  When you rename one or more datafiles in the primary database, the change is not propagated to the standby database. Therefore, if you want to rename the same datafiles on the standby database, you must manually make the equivalent modifications on the standby database because the modifications are not performed automatically, even if the STANDBY_FILE_MANAGEMENT initialization parameter is set to AUTO.
  
  The following steps describe how to rename a datafile in the primary database and manually propagate the changes to the standby database.
  
     1.
  
        To rename the datafile in the primary database, take the tablespace offline:
  
        SQL> ALTER TABLESPACE tbs_4 OFFLINE;
  
     2.
  
        Exit from the SQL prompt and issue an operating system command, such as the following UNIX mv command, to rename the datafile on the primary system:
  
        % mv /disk1/oracle/oradata/payroll/tbs_4.dbf
        /disk1/oracle/oradata/payroll/tbs_x.dbf
  
     3.
  
        Rename the datafile in the primary database and bring the tablespace back online:
  
        SQL> ALTER TABLESPACE tbs_4 RENAME DATAFILE      2> '/disk1/oracle/oradata/payroll/tbs_4.dbf'
          3>  TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
        SQL> ALTER TABLESPACE tbs_4 ONLINE;
  
     4.
  
        Connect to the standby database, query the V$ARCHIVED_LOG view to verify all of the archived redo log files are applied, and then stop Redo Apply:
  
        SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
        SEQUENCE# APP
        --------- ---
        8 YES
        9 YES
        10 YES
        11 YES
        4 rows selected.
  
        SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  
     5.
  
        Shut down the standby database:
  
        SQL> SHUTDOWN;
  
     6.
  
        Rename the datafile at the standby site using an operating system command, such as the UNIX mv command:
  
        % mv /disk1/oracle/oradata/payroll/tbs_4.dbf /disk1/oracle/oradata/payroll/tbs_x.dbf
  
     7.
  
        Start and mount the standby database:
  
        SQL> STARTUP MOUNT;
  
     8.
  
        Rename the datafile in the standby control file. Note that the STANDBY_FILE_MANAGEMENT initialization parameter must be set to MANUAL.
  
        SQL> ALTER DATABASE RENAME FILE '/disk1/oracle/oradata/payroll/tbs_4.dbf'
          2> TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
  
     9.
  
        On the standby database, restart Redo Apply:
  
        SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
          2> DISCONNECT FROM SESSION;
  
  If you do not rename the corresponding datafile at the standby system, and then try to refresh the standby database control file, the standby database will attempt to use the renamed datafile, but it will not find it. Consequently, you will see error messages similar to the following in the alert log:
  
  ORA-00283: recovery session canceled due to errors
  ORA-01157: cannot identify/lock datafile 4 - see DBWR trace file
  ORA-01110: datafile 4: '/Disk1/oracle/oradata/payroll/tbs_x.dbf'
  

  Hope that helps.

  Ogan

• How can I exr rendered as inculde another channel as nuke in after effect?

  I wonder what how can I exr rendered inculde as another channel like "nuke" in the "after effect"?

  You can not. AEonly renders RGBA. Everything must be exported in the form of separate sequences.

  Mylenium

• Hello world. How can I change 2000 channels of unique text in the layout ID to another 2000 located in the Excel table?

  Hello world. How can I change 2000 channels of unique text in the layout ID to another 2000 located in the Excel table?

  Hello

  1 click using the Multi-Find/Change to our clever friend Marthino da Gloria, version 2.0.

• How to open the pdf 3D with selection of specific models of url link

  I assumed that this feature is not supported, but let me ask you one thing.

  I'm looking for a way to open the pdf 3D with selection of specific models of url link.

  For example, the following link is opened, if LC to open 3d.pdf with automatic selection of the model 'abc' in the model tree?

  http://example.org/3D.PDF#model=ABC

  If this can be done in javascript, it is really useful.

  Impossible. There are only very limited for the Acrobat family command line options and you cannot change the.

• How to select a value to a maximum value of another column in the same line?

  pVersion pdate pcount
  11 1/6 / 2011 1
  06/11/2011 0, 25
  11 1/6 / 2011 24
  
  How to select for a maximum pcount pversion, in this case count max is 25 and version will be 0?

  tcode wrote:
  pVersion pdate pcount
  11 1/6 / 2011 1
  06/11/2011 0, 25
  11 1/6 / 2011 24

  How to select for a maximum pcount pversion, in this case count max is 25 and version will be 0?

  WHERE PCOUNT = (SELECT MAX (PCOUNT) FROM TABLE1)