How to select the right and left a track audio channels in the graphics editor?
I put my 2 keyframes for gradual and hit the chart next to the Audio levels. Then in the graph Editor to see the slope of the fade.
I would like to use the Bezier handles to edit bland. But when moving them around it just doesn't move right and left audio channels separately, and I have no idea how to adjust them in unison or at least take the other to the same position as the first.
Thanks for the help
In General, audio Ae tools are not only versatile, so do not expect to have a hard time with them. your questions - it seems that if you want to manipulate the keyframes for Audio levels in the graph Editor, you will need to adjust the two handles, one at a time.
two workaround solutions: I can think of:
1. If you want to control the volume, it is better still to use stereo mix effects and not audio levels. It also has 2 values, only this time both are visible in the timeline panel if you can drag the two simultaneously (how you couldn't front with audio levels) and manipulate your chart.
2. If you still want to control audio levels after reading the 1st work around: you can connect your audio levels to a cursor of expression: Add a cursor of expression to your audio layer alt now (Effects-> expressions-> slider control control) click on sound levels to activate the expressions for this layer and drag the pickwhip expression. This will make the slider to control the sound levels and you'll have only one value in the graph Editor.
Tags: After Effects
Similar Questions
-
Problem with the screen! Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently. Can someone help, please step by step details. Thank you. Have Windows7!
Original title: screen
Looks like a monitor / setting screen. Horizontal and vertical positions may need to be adjusted in the monitor buttons. Another possibility is that the display resolution is not optimal.
-
Storm - derived screen leaves a margin on the right and left sides of screen
The Storm and Storm2, deriving from the screen leaves a margin on the right and left sides of the screen about 10 to 20 pixels.
How do they get this margin?
Thank you
You can re - compile on JDE 4.7 - that should get rid of the compatibility mode.
You can manually disable this in your application options.
It can also be disabled in the JAD file. Search the forum 'compatibility mode' and you will find a lot of posts that deal with this issue.
-
How to select the pieces of my image in black and white?
How to select the pieces of my image in black and white? FOW example letter J or the circle or the two together?
It's actually pretty easy, but I have to assume that you know a few basics in Photoshop
(1) open your existing image
(2) double click on the layer and the 'layer style' appears. In the mix if area set the sliders so the whites in the image disappears
You will be left with just the black elements in design
(3) duplicate layers
and merge them together
to give a standard layer
(4) ctrl or cmd click on the layer to select and create a layer mask
(5) you now have a mask of the image. Duplicate the layer, click alt or option, click on the layer mask to call
(6) the blacks and the whites are not completely black and white for the use of levels to adapt to the absolutes
(7) now you have to decide what you want to select. In this case, I chose the lettering and simply covered everything else to the top with black. You do this by lasso selection and fill and items when it's delicate brush just the details with a black brush "hard." .
(8) at this stage, you can do what you want you have a layer mask. So you can color the text for example
or place in a background color and apply a layer as Beveling effect
Hope that makes some sense. It is much easier to do than to describe.
-
Keyboard shortcuts in Audition 3 like shuttle/Transport/right and left of the CS6
I can't find a way to emulate the keys of J K L video editors (shuttle left, stop, right shuttle) in Adobe Audition 3.
Video editors rest their fingers on the keys J, K and L. Pressing L plays normally, pressing play faster, and a third plays faster still. Same thing with the J key in direction opposite.
In hearing CS6, they are called shuttle right and left of the shuttle. I tried all the settings control Transport play AA3 with no luck.
I remember this problem long ago at the Audition 1.5 so it MUST be a way to do this in 3.0!
Any tips?
You can assign keyboard shortcuts in the AA 1.5 and 3. What you had selected as keyboard shortcuts in 1.5 should be reproducible in 3. However in both versions can bring you several taps the FF or RW keys increase the speed as in CS6. Depending on which version of FF and RW you assign to the McLaggen and L keys, you can either start at a fixed speed or get faster if you press and hold for more long.
-
Printer all in one HP3520 - how to select the wireless network and enter the WEP key?
According to print my wireless network is detected.
How to connect the! @# % printer $ fo the wireless network and enter the WEP key?
Instructions on the HP site tell me to selet NETWORK on the printer control panel. Well, there's a way to select the NETWORK from the control panel. It is not an option for him.
I downnloaded and installed the latest drivers.
I have restored the default settings.
How to select the wireless network and enter the WEP key?
All of HP's instructions seem to be for a newer printer with a touchscreen.
I want that the printer is connected to my main computer via the USB port. I want to be able to print wireless phones and tablets.
My 3520 is not a 'touch Screen' and it has wifi.
However, the following work:
Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.
This leads me to believe that ONLY the wireless doesn't work. I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.
Thank you for your help
-
Trying to mix tracks at a track that holds the information of right and left
I use hearing CS6.
I'm trying to mix files containing multiple tracks (up to 10 tracks) with separate left and right signals.
I want to mix down a track and retain the information in right and left.
I am only able to mix and get the left right combined signal. After auto update for Windows I can't keep the left right info but merges in mono 2.
You have these 10 tracks opened in a single session or stereo? If, for some reason, default session of the hearing has been changed in Mono while might produce results that you hear. So be sure that you start a new session as a stereo and use it.
-
Tecra M2 725 spots dark right and left lower corner.
I bought a Tecra M2 725 and in the lower corner of the right and left, there's a place. It's looks the same when you hold a magnet near a CRT monitor. They are of small size and remain in the dimensions of the Windows taskbar.
They are sometimes more obvious than other periods. I have the idea that he has something to do with the LCD backlight tubes.
Y at - it someone who can confirm if it has too? You can see the best in making a diagnosis with the Toshiba software test and select only the test "Display". In this test, you will see a green screen, and there I see 'Shadows' the best.
Thanks for your help!
Hello
Well, looks like you have a problem of display hardware.
In my opinion, you should contact Toshiba service partner. Maybe the screen needs to be replaced.Good bye
-
How to select the Type of industry 8.3 Professional P6
Hi all
According to the document to change the type of industry for 8.3 Professional P6, I had to go to P6, Application settings, general link.
But in the P6 Web client to administrator > Application Configuration > General there is no option is available for the type of industry.
Let me know, how to select the type of industry?
You can see the OPINION score "How to change the Type of industry P6 P6 PPM (Professional), P6 EPPM E8.2 and later versions (Doc ID 1386047.1)".
Also can you paste a screenshot here.
-
How to select the path to a file icon button to a table?
I have a SYSTEM_PATHS table name. All physical access paths as 'where the forms of execution are located' or 'where performance reports are located' are stored in its ranks for example (C:\HRMS\FORMS\)
I memorized the path of the icon files (.ico) inside. The forms of execution can take the path of the icons for the buttons of this table. And access the icon of the chosen path. I use forms 6i. Normally, I put the path of the icon files in the nerve to property of the button as (C:\HRMS\ICON\). But now, here, I don't have a path but its in the column of a table. How to select the path to a file icon button to a table using forms 6i?Hello Gul,
have you tried
set_item_property('Button name',ICON_FILENAME,
); Concerning
Marcus -
How to select the same forms of color in the adobe flash program?
How to select the same forms of color in the adobe flash program? for example, we assume that 10 forms of rectangle. 3 of them are red and others are green. I want to use only one method or click to select 3 of them. Please help me
Thanks kunter
You can use Ctrl + F.
-
It is not an option to select the registry editor
original title - same topic-other problem
When double clicked on addspooler.reg & open with is selected, there is no option to the registry editor select. You said there was another way - that was my question. Thanks for any help.
Also my instructions said:
Alternatively, you can right-click on the "addspooler.reg" file, choose open with... and select the registry editor which will then import the file. If you double click it and it opens with Notepad, this means that XP (at some point) said to open with notepad .reg files. This isn't really a problem since you can import the file otherwise.
In your case where you do not see the extension .reg, rather right click the "addspooler" file and choose ' open with... The registry editor "."
Do not double click on the file-it will not work for you.
RIGHT click ON the addspooler.reg file and follow the directions to open with... The registry editor.
Y at - there some problem with these instructions read you them and that it cannot be implemented?
Maybe the message is displayed in white on your end?
Now, it's really the last, finally, finally, the last time that I re-post the instructions.
-
How to change the graphics rather than the windows screen resolution
Hello
Intel graphics card;
In response to the question of size screen. How him alter the graphics rather than windows.Granniebiker
Hello
I m not very well what you want to do? :|
You want to change the resolution of your laptop screen?I assume you have an XP operating system.
If you can make them using two different ways.(1) go to-> graphic display Manager Control Panel Intel-> in one available tabs, you can change the display settings
(2) using a second way to make a right click on the desktop-> properties-> settings tab
There is also a setting to change the display resolution.Good bye
-
Equium A210-1AS: how to upgrade the graphics card from 128 MB to 256 MB
Hello
can someone tell me how to upgrade the graphics card 128 MB to 256 MB on the Satellite A210-1as... thx
Hello
Update graphics card is not possible.
The GPU chip is soldered on the Board and it of not possible to remove the sleeve.Good bye
-
How to upgrade the graphics card on G71 - 345 CL
Hello
How to upgrade the graphics card on G71 - 345 CL. The graphics card is expandable. If so, what are the options for upgrades.
Hello
Unfortunately, your Intel GMA is integrated and is not an evolutionary element.
Best regards
DP - K
Maybe you are looking for
-
Tecra M5: How to use the FN + F2 fast locking with external keyboard keys?
When to use a docking station and the keyboard of the UBS, the function key ("Fn + F2") on my tecra M5 as will not work. The USB keyboard has a Fn key, but when you press on with F2 nothing happens. Can I lock the screen another way?
-
Dashboard beta problems with the xbox dashboard beta? I was asked to download, but I don't want a brick console I have the slim version
-
installation of visual studio 2010
I get an error during the installation of vs2010, its display requirements and prerequisites are missing
-
The "new task" task manager of the elevated privileges
In Windows XP (either, although I've never tried xp 64), if I used "run as" to start the Manager of tasks as an administrator so I could "show processes from all users", I could also use the "new task" option to start an admin command prompt without
-
How could I create the effect of loading in Web mode for bb10