How to send commands Photonics series?

Hello!

I have to send control commands to the evaluation of light source package IR of ICx Photonics via Labview 9.0. So, I tried the example VI "write basic series and Read.vi. To send a command, I have to write a letter then its value and, finally, a carriage return. For example P102 [cr]. Because of the carriage return, I put the termination char '13' (dezimal) or ' (MIT). LabVIEW and the evaluation kit now know when a command completes. The problem is, that I only recover from strange letters and "?" as answers. That means a share of Labview or the evaluation kit does not include orders. Given that all other settings are good, I guess that Labview does not send with the ANSI emulation?

But when the problem is ANSI, so I don't understand why I get the right answer when I send a single 'I' for the version of the firmware. Is it possible, that only the first letter is interpreted right?

There is another tank of termination that I can try? Til now, I tried [cr], [VC], [lf], [LF], \r, \n, combinations of these last, none of them,...

The material is ok. I could get the results desired with HyperTerminal.

I'm out of ideas. HyperTerminal allows you to set a delay between characters. Maybe it's you need? The code to do what is stated below.

Tags: NI Hardware

Similar Questions

  • How to send commands to my oscilloscope in NIMAX?

    Hi all

    I'm new to LabView and have bought a digital oscilloscope and a digital signal generator.

    I have the list of remote control for each of them.

    The oscilloscope is USB, and the signal generator has only a RS232 port.

    I am able to send commands to the oscilloscope via the EasyScope software supplied with the scope, such as * CAL?, which calibrates successfully my reach.

    However, I can't have my field meet NIMAX.   I am able to get the signal generator to work in NIMAX or EasyScope.

    Could someone tell me what should I do to activate my USB channel in NIMAX, as well as my channel RS232?

    It is rather curious that the scope correctly responds to * IDN?, but fails to react on * CAL.?

    CAL may require character of specific endpoint sokme?

    What happens if you do the CAL without IDN before when you have a new session? Perhaps, the scope crashes somehow with the IDN...

    Norbert

  • HP Officejet 4630 e-all-in-one: how to send a fax 2 sides with HP Officejet 4630 e-all-in-one series?

    There is no documentation on how to send a fax with HP Officejet 4630 e-all-in-one-sided.

    I have 20 pages with a print on both sides. How do fax you these pages so that they receive the same pages with print on both pages? I load the documents with top paper feeder. The scanner allows you to load pages ask two face contrast to send the fax?

    Thank you, Kevin

    You're welcome cybercook.

    If you need keep the same order, put a single page at a time, recharge it with the other side facing upward and click Start a new search.

    You can also place all the stocks and click Scan Page, once recharge on the other side and click again on the analysis Page.

    Once the page was scanned send the fax.

    Shlomi

  • How to send the order to T402 Zebra label printer with rs232

    Hello

    I use T402 Zebra label printer, communication cable series D9.

    I want to send commands to the printer to the printer to print the date and serial number and barcode. How can I use the visa to send commands to the printer?

    May be that someone is there to help?

    Thank you

    I don't know whether or not the printer you have has a real-time clock. I suspect that it is not. Therefore, you must format the date and time string in your LabVIEW code and just include this string in the label. The printer itself is not capable of producing, tracking and assinging the serial numbers of your Instrument. Your application will need to do and just like the date format of the specific string and put it in the label. I highly recommend that you download the ZPL Manual of www.zebra.com. I would include it here, but it's too big to be included as an attachment.

  • LabVIEW TCP/IP Client and server, I need to send commands and receive comments side server from the client regarding the command sent.

    Hi all

    I can configure my two PCs, one as a client and a server very well. I am able to send commands from the server to the client. However, I am trying to determine how I can get feedback from the client to the server that something has changed, or a CQI that the command has been received. How I can do this in LabVIEW with the box to TCP/IP tools, or is there a better way to do it?

    Thanks for your help!

    Best regards

    -Gmac

    Once the connection is established, TCP does not care which end is the 'server' and the 'customer '. Data can be sent in both directions using the same read and write functions. So, if you are already able to send data to the client and read on the server, you should be able to do the same to send data from the server to the client, using the same TCP connection.

    If this is not clear, please your postal code so that we can provide more specific advice.

  • Why my laptop Windows 7 doesn't send commands constant UPNP on my router?

    Hello

    My Windows 7 laptop sends commands to constant UPNP on my router (approximately 5 seconds).  How can I know what is the cause and stop it?  The constant UPNP causes most of the routers to crash.

    Thank you
    Tony

    Hello

    More unusual that happens on more than one router.

    Did you update or re - install the latest network driver? Suspect either the driver netword
    or the actual hardware of the network device. You can try to disable the WiFi or
    Device and external use (wired) NETWORK interface card. Or try the other one being not used - if you use
    WiFi, try hanging the router by wire and if by wire try using WiFi.

    Have you tried to do Port Forwarding? You are trying to access the other
    network devices not on your physical computer, like a printer, or even just the files on
    other computers on the network?

    Some of the old LinkSys and other routers allow to configure UPNP on the router from the
    NET but I can't believe that is your problem, since you said it happens on other routers.
    UPNP is usually controls, enabled or disabled on the router.

    ===============================================================

    Given that I've never seen the question when he was not the router itself check with people
    TechNet as someone may have encountered the problem?

    TechNet - Windows 7 IT Pro
    http://social.technet.Microsoft.com/forums/en/category/w7itpro

    Please provide your comments as you can.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to send a mail in oracle 10g

    I am new to oracle developer... we use oracle 10g developer... How to send messages via oracle 10 g on a click.pease button help me.

    Thanks in advance

    This question was asked several times on this forum, see if you get the help of the following:

    https://forums.Oracle.com/message/5395438#5395438

    Search results: https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=form+email

    Check this out as well:

    http://nzchaudhry.WordPress.com/2013/05/31/send-report-via-email-attachment-in-Oracle-Forms-10G/

    You can find the init.ora or initSID.ora file under $ORACLE_HOME/dbs on linux and Windows under $ORACLE_HOME/database. Otherwise, you can create using the command "create pfile from spfile.

    Aneel

  • How to send an email to vma?

    Hello

    does anyone know how to send an email to vma?

    I can't find the "mail" command.

    Thank you

    Timm

    vMA is a nice light Linux OS, however, is that LINUX. You can easily install additional packages as an e-mail client, it is not included by default.

    I sent mail using the Net::SMTP Perl module and you can find many examples on the web or install your own email perferred client.

  • How to send the value of the prompt to an another dashboard with action link?

    Dear all,

    I find how to send the parameter to a different dashboard with the link of the action.

    URL = http://hostname/analytics/saw.dll?Dashboard & PortalPath = % 2Fusers % 2Fweblogic % 2FMartin % 20Test % 2FMartin & Page = page 1 & Action = Browse & P0 = 1 & P1 = eq & P2 = entity. "" Gen6, entity ' & P3 = % 22EntityCode % 22

    But I don't know how to send the value of the command prompt. I tried @{EntityCode}, Entity.Gen6, Entity, etc. None of them worked. They just be send as a string.

    Anyone know the solution? Thank you.

    Best regards
    Martin

    Try to do a manual URL to see if it works. Static variables are called as Valueof (variable) and presentation of variables such as @{variable}
    Discover th url below and add your variables as needed and of course override other settings.

    '' || Link | ''

  • Oracle Lite API to send commands

    Hello
    Did anyone here ever used the Olite API to send commands to devices?

    When I send the command 'Install apllication' of MobileManager all platform devices. Sometimes, Mobilemanager crashes for hours, and not all devices receive the order.

    So I would like to know if this can be done by Oracle Lite java API and if anyone has examples of sum on how use the Classes oracle.lite.resource.dm. *.

    Thank you

    JSET

    If you have the mobileserver installed, take a look at it please ORACLE_HOME\Mobile\Server\demos\devmgr\java $ for samples on orders.

  • How to send an audio message, but not with imessage?

    How to send an audio message, but not with imessage?

    Find another app/service that will allow you to do. Or record a voice memo using the voice recorder application and attach to an SMS.

  • How to send to apple iphone for repair of the screen

    Hi, I bought an iphone over 6s (64 GB) two weeks ago, the screen has been hacked by accident.

    I looked up on the apple site the cost of repair in the citation is $ 249

    However, when will organize a repair via the apple website he's trying to make me pay more than $500 Ouch!

    I think it's because they want to send me authorized service center apple not themselves, someone has a solution to this question and a suggestion how I can get this repaired for $249.  IE, how to send to apple authorized reseller.

    I'm in Darwin in Australia

    With our thanks

    Suresh

    Hello

    Contact Apple support (mail service may be available) or make a Genius Bar reservation to repair screen.

  • How to send a file to the cloud?

    (1) how to send a file to the cloud?

    (2) at - it a difficulty to find and recover a file that has been sent to the cloud? If the use is similar to the use of an external hard drive, I don't mind.

    The following contains information on how to activate and use iCloud drive. Note that with iCloud as it exists currently with OS X El Capitan, for any file stored in iCloud drive a local copy is also stored on your Mac.

    iCloud Drive FAQ - Apple Support

  • How the sender can resolve this message may be a scam?

    How the sender can resolve this message may be a scam?

    When your question has been answered can mark you the thread as "Solved" Please?
    Thank you.

  • How doi send texts using the speech function without hitting the Send button?

    using the speech function in texting, how to send the text without actually pushing the Send button? When I say 'send' or 'send message' he just keeps typing

    "Hey, Siri, send a message to Bob. Siri will then ask you what you want text Bob. Once you stop dictating, Siri will ask then if you're ready to send the message. Say, "Yes." It's really very nice.

    If you are already in the message app and using speech-to-text, you must press the Send button.

Maybe you are looking for

  • Windows Media Player - playback speed issues

    When I open some files .mov with WMP 11, I can't set the playback speed.  Specially when I open the control of development for reading there is no cursor speed control.

  • Documents appear suspended in the spooler.

    When printing, all documents for all printers show paused in the spooler on Vista PC. Need to go in the spooler and return the documents to print. Vista 32 SP2 and HP and Epson printers running. Removed all of the printers 'Printers' in Vista, re-ins

  • Delete messages to from a blackberry 8830 blackBerry Smartphones

    Is there a way to delete a message in Microsoft Outlook and deleted it on the Blackberry?

  • Error 117. Really? We are still fighting this battle?

    Ok. I still get error 117. (OSX Sierra)  I finally got (via the live chat - which is awesome btw) most of the CC apps I need is installed. However, I can't update SOUL or Illustrator. Now I have to pay a small fortune each month and can not get updat

  • Developer SQL 4 - issue House Java JDK

    HelloI just installed SQL Developer 4 (I have the Version 3.2.20.09 race) and when tried to start at the first time, asking its JDK.My cell phone has Java (JRE) after that, I tried to give all 3 trails but its not accepting.Help, pleasej2re1.4.2_16jr