How to send specific file downloads

All my downloads automatically in the download folder. I want to ask me where to save each specific download to the computer. I use laptop, Windows 7

If you choose record under, you can select any folder you want to save.

Tags: Windows

Similar Questions

  • How to decompress the files downloaded for use with Windows 7?

    How to decompress the files downloaded for use with Windows 7.  Specifically, zip files are a Magellan GPS unit.

    There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files

  • How to open a file downloaded microsoft word to macos sierra

    How to open a file downloaded microsoft word to macos sierra

    You should just be able to double-click on it since OS X built a decompression software. But unless you are sure that the source of the MS Word file is safe and secure, be careful, because a typical method of malware distribution is through such files.

  • How to send a file to the cloud?

    (1) how to send a file to the cloud?

    (2) at - it a difficulty to find and recover a file that has been sent to the cloud? If the use is similar to the use of an external hard drive, I don't mind.

    The following contains information on how to activate and use iCloud drive. Note that with iCloud as it exists currently with OS X El Capitan, for any file stored in iCloud drive a local copy is also stored on your Mac.

    iCloud Drive FAQ - Apple Support

  • How can I disable file download in firefox

    Hi all

            I want to disable file download for firefox. Because children may download some not good file. How can I disable file download or enable file download?
    

    Thank you

    See also:

  • How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

    How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

    You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.

  • How to send / receive files via Wifi Direct... ?

    I found this bike e wifi Direct support. I tried to send files via wifi direct, but I couldn't.

    How to send / receive files with direct wifi without installing any 3rd party application... ?

    Uses of direct wifi... ?

    Sorry about that. Can be a regional thing, I'm not familiar with.

    Back to my question - what types of files you try to move?

  • How to send a file in the server of the University Complutense of MADRID using the Code?

    Hello

    I tried several times to upload a file to the server of the University Complutense of Madrid from the adf page, but I can't do it.

    First: I have used this method to do, but it feel that the file downloaded successfully and when I open the server I haven't found this...

    public String addNewContent() {}
    InputStream fileStream = null;

    try {}
    createConnection();
    String filePath = "C:\\Users\\Administrator\\Desktop\\ucm classes\\Class1.java";
    String autherName = "weblogic";
    fileStream = new FileInputStream (filePath);
    = New File (filePath);
    String [] fileTitle = filePath.split("/");
    long fileLength = new File (filePath) .length ();
    param.getBinder (.putLocal (CMConstants.CM_SERVICE_NAME),
    CMConstants.CM_CHECKIN);
    param.getBinder () .putLocal ("dDocType", "Application");
    Title of the downloaded file
    param.getBinder () .putLocal ("dDocTitle", fileTitle [fileTitle.length - 1]);
    Name of the author
    param.getBinder () .putLocal ("dDocAuthor", autherName);
    Content security for (Group and account)
    param.getBinder () .putLocal ("dSecurityGroup", "Public");
    param.getBinder () .putLocal ("dDocAccount", "");
    param.getBinder () .putLocal ("dFormat", "text/html");
    param.getBinder () .putLocal ("xCollectionID",
    (getFolderIdFromPath ("/ Contribution dossiers/22 /"))) ;
    param.getBinder () .addFile ("primaryFile", file);
    param.setServiceResponse (param.getIdcClient (.sendRequest (param.getIdcContext ()),
    (param.getBinder ()));

    InputStream myInputStream = param.getServiceResponse () .getResponseStream ();
    String myResponseString = param.getServiceResponse () .getResponseAsString ();
    System.out.println ("downloaded file Details: \n" +)
    myResponseString);

    DataBinder myResponseDataBinder =
    param.getServiceResponse () .getResponseAsBinder ();

    System.out.println ("file uploaded successfully");
    } catch {(IdcClientException idcce)
    System.out.println ("IDC customer Exception occurred. Cannot download the file. Message: «+»
    idcce.getMessage () + ", the stack trace:");
    idcce.printStackTrace ();
    } catch (IOException ioe) {}
    System.out.println ("IO Exception has occurred. Cannot download the file. Message: «+»
    ioe.getMessage () + ", the stack trace:");
    ioe.printStackTrace ();
    } catch (Exception e) {}
    System.out.println ("Exception occurred. Cannot download the file. Message: «+»
    e.getMessage () + ", the stack trace:");
    e.printStackTrace ();
    } {Finally
    If (param.getServiceResponse ()! = null) {}
    param.getServiceResponse (m:System.NET.Sockets.Socket.close ());
    }
    If (fileStream
    ! = null) {}try {}fileStream.close ();} catch (Exception e) {}e.printStackTrace ();}}}

    Returns a null value.

    }

    ----------------------------------------------------------------------

    Second: I used this method, but it did not work also

    public String uploadFile() {}
    try {}
    String inputFile1 ="";
    UF UploadedFile = (UploadedFile) inputFile1.getValue ();
    String filePath="C:\\Setup\\mmm.txt; »
    InputStream fileStream = null;
    try {fileStream = new FileInputStream (filePath) ;} catch (FileNotFoundException e) {}}
    String [] fileTitle = filePath.split("/");
    long fileLength = new File (filePath) .length ();

    //DataBinder Binder = IdcClient.crea
    param.getBinder (.putLocal (CMConstants.CM_SERVICE_NAME),
    CMConstants.CM_CHECKIN);
    param.getBinder () .putLocal ("dDocAuthor",
    "weblogic"); If the user is admin, can specify any user
    param.getBinder () .putLocal ("dDocTitle", "titleee");
    param.getBinder () .putLocal ("dDocName", "nameee");
    param.getBinder () .putLocal ("dDocType", "DigitalMedia");
    param.getBinder () .putLocal ("xCollectionID",
    getFolderIdFromPath ("/ files/11 Contribution")); parent folder
    param.getBinder () .putLocal ("dSecurityGroup", "Public");
    param.getBinder () .putLocal ("dDocAccount:", "");
    param.getBinder () .putLocal ("xComments", "Review of Montreal");
    param.getBinder () .putLocal ("xWCTags", "Montréal");

    param.getBinder () .addFile ("primaryFile",
    new TransferFile (fileStream, 'child',
    fileLength,
    "text/html"));
    ServiceResponse response =
    param.getIdcClient (.sendRequest (param.getIdcContext ()),
    param.getBinder ());

    } catch (Exception e) {}
    System.out.Print("");
    }

    Returns a null value.
    }

    -------------------------------

    Can someone tell me what's wrong? !

    Thank you

    This will definitely work

    package demo;
    
    import java.io.*;
    import oracle.stellent.ridc.*;
    import oracle.stellent.ridc.model.*;
    import oracle.stellent.ridc.protocol.*;
    import oracle.stellent.ridc.protocol.intradoc.*;
    import oracle.stellent.ridc.common.log.*;
    import oracle.stellent.ridc.model.serialize.*;
    import oracle.stellent.ridc.protocol.http.*;
    import java.util.List;
    
    /*
     * This is a class used to test the basic functionality
     * of submitting a checkin to Content Server using RIDC.
     */
    
    public class TestRIDCCheckin {
    
        public static void main(String[] args) {
            // Create a new IdcClientManager
            IdcClientManager manager = new IdcClientManager();
            try {
                // Create a new IdcClient Connection using idc protocol (i.e. socket connection to Content Server)
                IdcClient idcClient = manager.createClient("idc://localhost:4444");
                // Create new context using the 'sysadmin' user
                IdcContext userContext = new IdcContext("sysadmin");
                // Create an HdaBinderSerializer; this is not necessary, but it allows us to serialize the request and response data binders
                HdaBinderSerializer serializer = new HdaBinderSerializer("UTF-8", idcClient.getDataFactory());
    
                // Databinder for checkin request
                DataBinder dataBinder = idcClient.createBinder();
                dataBinder.putLocal("IdcService", "CHECKIN_UNIVERSAL");
                //dataBinder.putLocal("dDocName","TestRIDCCheckin");
                dataBinder.putLocal("dDocTitle", "Test RIDC Checkin");
                dataBinder.putLocal("dDocType", "Document");
                dataBinder.putLocal("dDocAccount", "");
                dataBinder.putLocal("dSecurityGroup", "Public");
                dataBinder.addFile("primaryFile", new File("c:/test.txt"));
    
                //dataBinder.putLocal("doFileCopy", "1");
    
                // Write the data binder for the request to stdout
                serializer.serializeBinder(System.out, dataBinder);
                // Send the request to Content Server
                ServiceResponse response = idcClient.sendRequest(userContext, dataBinder);
                // Get the data binder for the response from Content Server
                DataBinder responseData = response.getResponseAsBinder();
                // Write the response data binder to stdout
                serializer.serializeBinder(System.out, responseData);
    
            } catch (IdcClientException ice) {
                ice.printStackTrace();
            } catch (IOException ioe) {
                ioe.printStackTrace();
            }
        }
    
    }
    
  • How to send multiple files in After Effects Premiere Pro

    Hello, can someone tell me how I can send several files with aftermath of first pro and have the changes appear in the cut sequence in first pro after the backup? I would like to have my changes remain the same, but also like to be able to change them.  Is it possible to send the. MOV file and make it appear in the order that I already spent hours of editing?

    In addition, after creating a new composition in sequels, the film does not show in the preview window Comp. I'm sure it's a newbie thing, but can you please tell me what the H am I doing wrong? See the photo below.

    Screenshot 2016-06-13 16.06.33.png

    Also get error below:

    Screenshot 2016-06-13 16.06.41.png

    Thank you.

    elizachristine wrote:

    Hello, can someone tell me how I can send several files with aftermath of first pro and have the changes appear in the cut sequence in first pro after the backup?

    You can have many compositions of AE related dynamically in a Premiere Pro sequence. Just select an item (or multiple clips) in the Assembly of the sequence, right-click, then choose replace with After Effects Composition.

    Note: this is not how I would do, but that's what you ask and a lot of people do it this way.

    I just usually copy and paste clips from first in an AE project, working on it in AE and then make it in an intermediate codec in AE render queue and bring back the file obtained in the first.

    elizachristine wrote:

    I would like to have my changes remain the same, but also like to be able to change them.

    I don't know what you mean by that.

    elizachristine wrote:

    Is it possible to send the. MOV file and make it appear in the order that I already spent hours of editing?

    Again, I'm not quite clear on what you're asking. You can certainly do AE work and drop it in your Premiere Pro sequence.

    elizachristine wrote:

    In addition, after creating a new composition in sequels, the film does not show in the preview window Comp. I'm sure it's a newbie thing, but can you please tell me what the H am I doing wrong?

    I'm not sure. Move your time indicator current far in your composition.

    It might behoove you to read the help on work with Premiere Pro AE file.

  • How to send a file without closing the socket?

    I wrote a program to transfer a file by using the tcp connection, where I closed the socket because the receiver must detect the end-file.  But now I would extend it to several files for which I shouldn't close the socket until all files are sent. I can't find a way to do this. So please help to solve.

    Such a long thread, so many errors.

    > Send an end of file marker after each file

    Eventually, which cannot work unless the EOF marker can occur in the file, which is unknowable, or there is a convention of escape agreed where it occurs in the file. In which case, you must also apply the convention to escape to escape Convention. For example, you can terminate with ETX and escape with ESC, but this means that the ETX and ESC must be escaped in the data file, and which in turn means that you need to escape out of ETX and ESC ESC ESC when you receive.

    > In the link, they said the error to happen is because of the header

    No, in the link, they said that the error is caused by using a BufferedReader and then read directly the data stream. Jet disappears in a BufferedReader, err, buffering.

    > BufferedReader has a read (byte [] buffer) method

    No, BufferedReader doesn't have a read (byte [] buffer) method.

    Follows a proven response, unspeculative with code.

    1 use the sender DataOutputStream and DataInputStream to the receiver.

    2 send the file name with writeUTF() and read with readUTF().

    3. send the length of file with writeLong() and read it with readLong().

    4. send and receive exactly that number of bytes, as follows:

    length = din.readLong (); in the receiver, or File.length (to sender)

    total length = 0;

    int count;

    ubyte [] buffer = new byte [8192]; or what you want, any size > zero

    While (total < length="" &&="" (count="din.read(buffer," 0,="" (int)math.min(buffer.length,="" length-total)))=""> 0)

    {

    dout. Write (buffer, 0, count);

    Total += count;

    }

    Errors and omissions excepted. You can use this code on both ends.

  • How to send a file of errors

    I just set up the CDF_Email function and was able to send an email a calculation at the end, however, now I want to send an email after loading data and say that the charge was "Loaded without errors in data" or "loaded with data errors. If data loading, but with errors, I want to join the error file in the email. This is achieved by using the same CDF_Email function or do I have to take a different path. Thanks in advance!

    Here you go

    '#################################################################################
    '
    '  Script      : sendmail.vbs
    '  Author      : Celvin Kattookaran  - Original Version
    '  Description : To send error file and log files
    '  Date        : 8th Mar 2011
    '  ------------------------------------------------------------------------------
    '  ------------------------------------------------------------------------------
    '  Updates     :
    '  Author Date  Description
    '
    '
    ' "Usage: 1st argument is the Text body which is the file location of your mail body"
    '            "2nd to 5th Arguments are the Attachments that you wish to send"
    '            "6th or the penultimate argument is the Subject of the mail"
    '            "7th or the ultimate argument is the recepient mail address"
    '            "All arguments should be sperated by space and should be enclosed in between,If there are multiple receipents then sperate them like""[email protected];[email protected]"
    '
    '
    '  ------------------------------------------------------------------------------
    '  celvin.v.kattookaran 08-Mar-2011 Creation
    '
    '
    ' #################################################################################
    
    ' ----------------------------------------------------------------------------------------------------------------------
    ' -- Variable declarations --
    ' ----------------------------------------------------------------------------------------------------------------------
    '  Option Explicit
    
      Dim arg
      Dim aArg(7)
      Dim i
      i=0
    
     For each arg in Wscript.Arguments
        aArg(i) = arg
        i = i + 1
     Next
    
    ' ----------------------------------------------------------------------------------------------------------------------
    ' -- Parameter declarations --
    ' ----------------------------------------------------------------------------------------------------------------------
    
    ' Text Body   : aArg(0)
    ' Attachments : aArg(1)
    ' Attachments : aArg(2)
    ' Attachments : aArg(3)
    ' Attachments : aArg(4)
    ' Attachments : aArg(5)
    ' Subject     : aArg(6)
    ' To          : aArg(7)
    
    ' ----------------------------------------------------------------------------------------------------------------------
    ' -- User ID and SMTP Server declarations --
    ' ----------------------------------------------------------------------------------------------------------------------
    
      strMessageFrom = "[email protected]"
      strSMTPserver = "smtp.example.com"
      strSMTPPort = 25
      ' If your SMTP server needs authentication then uncomment the line below
      ' ***_*** strSMTPpassword = "password"
    
    ' ########################################
    ' # Please don't update below this point #
    ' ########################################
    
      strMsgBody =  CreateObject("Scripting.FileSystemObject").OpenTextFile(aArg(0), 1).ReadAll
    
    ' #####################################################
    ' ############# MAIN PART OF SCRIPT ###################
    ' #####################################################
    
    Select case Wscript.Arguments.count
     case 3
     strMessageTo = aArg(2)
     strEmailSubject = aArg(1)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
    
     case 4
     strMessageTo = aArg(3)
     strEmailSubject = aArg(2)
     strEmailAttachment = aArg(1)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
     Set fso = CreateObject("Scripting.FileSystemObject")
     if (fso.FileExists(strEmailAttachment)) then
     objMessage.AddAttachment strEmailAttachment
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment
     end if
     case 5
     strMessageTo = aArg(4)
     strEmailSubject = aArg(3)
     strEmailAttachment = aArg(1)
     strEmailAttachment2 = aArg(2)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
     Set fso = CreateObject("Scripting.FileSystemObject")
     if (fso.FileExists(strEmailAttachment)) then
     objMessage.AddAttachment strEmailAttachment
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment
     end if
     if (fso.FileExists(strEmailAttachment2)) then
     objMessage.AddAttachment strEmailAttachment2
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment2
     end if
     case 6
     strMessageTo = aArg(5)
     strEmailSubject = aArg(4)
     strEmailAttachment = aArg(1)
     strEmailAttachment2 = aArg(2)
     strEmailAttachment3 = aArg(3)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
     Set fso = CreateObject("Scripting.FileSystemObject")
     if (fso.FileExists(strEmailAttachment)) then
     objMessage.AddAttachment strEmailAttachment
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment
     end if
     if (fso.FileExists(strEmailAttachment2)) then
     objMessage.AddAttachment strEmailAttachment2
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment2
     end if
     if (fso.FileExists(strEmailAttachment3)) then
     objMessage.AddAttachment strEmailAttachment3
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment3
     end if
     case 7
     strMessageTo = aArg(6)
     strEmailSubject = aArg(5)
     strEmailAttachment = aArg(1)
     strEmailAttachment2 = aArg(2)
     strEmailAttachment3 = aArg(3)
     strEmailAttachment4 = aArg(4)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
     Set fso = CreateObject("Scripting.FileSystemObject")
     if (fso.FileExists(strEmailAttachment)) then
     objMessage.AddAttachment strEmailAttachment
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment
     end if
     if (fso.FileExists(strEmailAttachment2)) then
     objMessage.AddAttachment strEmailAttachment2
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment2
     end if
     if (fso.FileExists(strEmailAttachment3)) then
     objMessage.AddAttachment strEmailAttachment3
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment3
     end if
     if (fso.FileExists(strEmailAttachment4)) then
     objMessage.AddAttachment strEmailAttachment4
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment4
     end if
     case 8
     strMessageTo = aArg(7)
     strEmailSubject = aArg(6)
     strEmailAttachment = aArg(1)
     strEmailAttachment2 = aArg(2)
     strEmailAttachment3 = aArg(3)
     strEmailAttachment4 = aArg(4)
     strEmailAttachment5 = aArg(5)
     Set objMessage = CreateObject("CDO.Message")
     objMessage.Subject = strEmailSubject
     objMessage.From = strMessageFrom
     objMessage.To = strMessageTo
     objMessage.TextBody = strMsgBody
     Set fso = CreateObject("Scripting.FileSystemObject")
     if (fso.FileExists(strEmailAttachment)) then
     objMessage.AddAttachment strEmailAttachment
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment
     end if
     if (fso.FileExists(strEmailAttachment2)) then
     objMessage.AddAttachment strEmailAttachment2
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment2
     end if
     if (fso.FileExists(strEmailAttachment3)) then
     objMessage.AddAttachment strEmailAttachment3
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment3
     end if
     if (fso.FileExists(strEmailAttachment4)) then
     objMessage.AddAttachment strEmailAttachment4
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment4
     end if
     if (fso.FileExists(strEmailAttachment5)) then
     objMessage.AddAttachment strEmailAttachment5
     else
     Wscript.echo "No such file found in the system " & strEmailAttachment5
     end if
    
    end Select 
    
    ' ----------------------------------------------------------------------------------------------------------------------
    ' -- Please enable this part for testing purpose only --
    ' ----------------------------------------------------------------------------------------------------------------------
    ' --- Steps for testing ---
    '
    '     1. Remove ' **-**  from the script.
    '     2. Open a command prompt and move to the directory where sendmail.vbs is located.
    '     3. type sendmail.vbs "arguments" -- arguments must be seperated by space and should be enclosed in "".
    '
    ' ----------------------------------------------------------------------------------------------------------------------
    
    ' **-**  Wscript.echo Wscript.Arguments.count
    ' **-** if strMessageFrom = "" then
    ' **-**  msgbox("ERROR: Sender is not specified")
    ' **-**  end if
    ' **-** if strMessageTo = "" then
    ' **-** msgbox("ERROR: Receiver is not specified")
    ' **-**  end if
    ' **-**  if strEmailSubject = "" then
    ' **-**  msgbox("ERROR: Mail Subject is not specified")
    ' **-**  end if
    ' **-**  if strMsgBody = "" then
    ' **-**  msgbox("ERROR: Mail Body is not specified")
    ' **-**  end if
    ' **-**  if strMessageFrom <> "" then
    ' **-**  msgbox("Mail is send by: " & strMessageFrom)
    ' **-**  end if
    ' **-**  if strMessageTo <> "" then
    ' **-**  msgbox("Mail is send to: " & strMessageTo)
    ' **-**  end if
    ' **-**  if strEmailSubject <> "" then
    ' **-**  msgbox("Mail Subject is: " & strEmailSubject)
    ' **-**  end if
    ' **-**  if strMsgBody <> "" then
    ' **-**  msgbox("Mail body is: " & strMsgBody)
    ' **-**  end if
    ' **-**  if strEmailAttachment = "" then
    ' **-**  msgbox("ERROR: There is no Mail attachement, please specify one.")
    ' **-**  end if
    ' **-**  if strEmailAttachment <> "" then
    ' **-**  msgbox("Mail attachement is: " & strEmailAttachment)
    ' **-**  end if
    ' **-**  if strEmailAttachment2 = "" then
    ' **-**  msgbox("You have opted for sending only one attachement, if you wish to send one more attachment please specify the location of the next file")
    ' **-**  end if
    ' **-**  if strEmailAttachment2 <> "" then
    ' **-**  msgbox("Mail attachement is: " & strEmailAttachment2)
    ' **-**  end if
    ' **-**  if strEmailAttachment3 = "" then
    ' **-**  msgbox("You have opted for sending only one or two attachements, if you wish to send one more attachment please specify the location of the next file")
    ' **-**  end if
    ' **-**  if strEmailAttachment3 <> "" then
    ' **-**  msgbox("Mail attachement is: " & strEmailAttachment3)
    ' **-**  end if
    ' **-**  if strEmailAttachment4 = "" then
    ' **-**  msgbox("You have opted for sending only one or two or three attachements, if you wish to send one more attachment please specify the location of the next file")
    ' **-**  end if
    ' **-**  if strEmailAttachment4 <> "" then
    ' **-**  msgbox("Mail attachement is: " & strEmailAttachment4)
    ' **-**  end if
    ' **-**  if strEmailAttachment5 = "" then
    ' **-**  msgbox("You have opted for sending only one or two or three or four attachements, if you wish to send one more attachment please specify the location of the next file")
    ' **-**  end if
    ' **-**  if strEmailAttachment5 <> "" then
    ' **-**  msgbox("Mail attachement is: " & strEmailAttachment5)
    ' **-**  end if
    
    ' **-**  dim answer
    ' **-**  answer=msgbox("Do you wish to send a mail",vbYesNo)
    
    ' **-**  if answer = vbYes then
    ' **-**  msgbox("A mail will be send with the given arguments to " & strMessageTo)
    
    ' ----------------------------------------------------------------------------------------------------------------------
    ' -- Configuration --
    ' ----------------------------------------------------------------------------------------------------------------------
    
    '==Normally you will only change the server name or IP.
    objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 
    
    'Name or IP of Remote SMTP Server
    objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTPserver
    
    'If your SMTP server needs authentication then uncomment the lines below starting with obj
    
    'Your UserID on the SMTP server
    ' ***_*** objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = strMessageFrom
    
    'Your password on the SMTP server
    ' ***_*** objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = strSMTPpassword
    
    ' Set the authentication method
    ' ***_*** objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
    
    'Server port (typically 25)
    objMessage.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = strSMTPPort
    
    objMessage.Configuration.Fields.Update
    
    objMessage.Send
    
    ' **-**  elseif answer = vbNo then
    ' **-**  msgbox("Mail will not be send")
    ' **-**  end if
    

    What I do in my bat file is then add a line after success

    call %LOG_ROTATE_SCRIPTS_DIR%\vb\sendMail.vbs "%BASE_DIR%\mail\LOG_ROTATE_Procedure_Sucess.txt" "%SCRIPTLOG%" "Oracle Hyperion %EPMENV% - Procedure for Log Rotate is successful" "%MAIL_RECIPIENT%"
    

    Concerning

    Celvin

    http://www.orahyplabs.com

    Please check the answers as useful/correct as appropriate

  • How to send a file by e-mail with the Director

    It is even possible to have a button in a stand-alone projector that would send a file by e-mail or open an e-mail program and the file attached and addressed? Or is it possible to put a file on a server? Of course, these two methods could draw the attention of the user and ask for their permission.

    Just open the user's email program, you can use the standard jargon:

    goToNetPage (mailto:[email protected])

    This approach is kind of annoying because it actually opens a vacuum
    the browser window then the user's e-mail program. I don't think that you can use
    This approach however send attachments.

    A much better way is the fabulous of DirectXtras DirectEmail xtra.
    Visit their site:
    http://www.directxtras.com/demail_home.asp?UUID=1217348

    DirectEmail can do everything you ask (and more). It's
    cross-platform, shockwave safe, can manage text or HTML email, can do
    Spare part, can use a mail server or not and is really easy to use.

    The same company makes DirectFTP you can get:
    http://www.directxtras.com/DFTP_home.asp?UUID=1217348

    DirectFTP can put files on an FTP site with a minimum of fuss. I have
    repeatedly used both and they rock. You can actually
    write an e-mail or ftp full program with these xtras and Director.

  • How to send a file from a servlet to a user to download

    Hello, I would like to transfer a file from a servlet to a user and then delete the file on the server. I read that streaming the file to the user via the HttpServerResponse.getOutputStream () is the best method, because then I can remove the temporary file that I transfer. However, this appears to view the contents of the file. What I would like is to have the file be downloaded the disk hard users or preferably allow the user to accept or reject the file before it is downloaded to the disk. In addition the files to be transferred range of txt files to CSV for docx etc. What is the best way to do it?

    Thank you

    You must set the Content-Disposition header. Find it in the RFC HTTP specification.

  • I want to send a file downloaded from android smart? phone to this computer. HOW? I'm new but eager! Help!

    What happens now?

    Hi , quaaludedude,

    You can download your files to Acrobat cloud and then can consult/download on your computer.

    Please see this Faq: http://www.adobe.com/devnet-docs/rm/ios/readerios_en/acom.html

    Kind regards

    Florence

  • How to send binary file to a printer?

    Is it possible to set up a printer on your desktop which will send a binary file?  I don't want that he converted somehow in a language of the printer.  Specifically, I want to be able to select a printer on my list of printers available and send a PDF file.  I want the file to arrive like a native, not PDF, PCL or PostScript file.  I've seen RAW.exe and RAWPRN.exe out there, but not all the instructions on how to use them.  I want to do even possible?  Currently, I use an LPR command from the command prompt, but is there a way to set up a printer to do the same thing?

    Hello

    You can use your favorite search engine to download & install a third-party software converter to change the file format. Then, try to print the file.

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

    Hope the helps of information.
    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • These laptops are built to fail? video included!

    A few days ago my lenovo started video display distorted... then it would BSoD and when I rebooted, it said to be fine for some time then to do it again... I did twice before when I rebooted it that no video wouldn't gone out at all, even not on a mo

  • Error: lsass.exe. system error.

    Original title: "Lsass.exe" is there no solution? I'm runnng Windows XP, I made the recovery of the PC/3 times now. After recovery, I have to go through the difficult task of all updates and so on. I get usually far in the process, then right after a

  • installed displayLink - 6.0.34621, now the screensaver does not work

    MS insisted that I have download DisplayLink - 6.0.34621. I had installed. Now my screensaver does not work. I get a black screen with the message, "the screen saver can't run because it requires a newer video card or compatible with Direct3D. What c

  • Detect how far user made scroll to the bottom of the screen

    Hello About BB9800 im having some scrolling problems, its delicate for the user scroll completely to the bottom of the screen. Is it possible to detect when the user has navigated about 9/10 of the way down the screen and programmatically and then sc

  • Between the leased line and frame relay connection

    Hey the Cisco Experts, Based on my commitment, I need your advice on how to route packets from users of frame relay to users of leased with bridge lines different. If I use the 192.168.0.102 bridge, I can access the 192.168.4.0 network but not the 19