How to separate the IVI of the particular instrument channels

Similar Questions

• How to separate the data from the reports

  

  I wanted to ask, how to separate the data in a single page, in the left side of page 1and then the right side of the page 2

  Thank you

  

  my report layout.

  you have to find the solution.

• How to separate the Raw files of the photo library

  My photo library is over 700 GB. I have a lot of raw files that are 30 MB or more. How can we separate the raw files in a separate file or a separate library?

  Duplicate your photos library in the Finder and then remove all the BULLIES of the first library photos and all photos that are not the RAW files of the second library.

  You can search for RAW photos with a smart album:

  File > new Smart Album

  Then set the rule set to "picture is GROSS."

  Of the other library use the rule 'The Photo is not BELIEVED'.

• How to separate the content of the XML element

  Hi all
  
  How can we separate content of the XML element in two strings, where each string will be copied to new variables.
  
  For ex:
  The entry that I get is
  
  C:/documents/sharedFiles/Apple.PDF < XmLElement > < / XMLElement >
  
  now I want to break the content into two parts as
  
  < yyyy > C:/documents/sharedFiles / < / aaaaa >
  Apple.PDF < bath > < / bath > (I want to separate the file name string)
  
  and now I want to copy it in two other variables. How can I achieve this in BPEL. Appreciate your help.
  
  Thank you
  
  Published by: kameshb on March 25, 2013 11:16

  Hi Philippe,.

  I tried this on a simple XSL and achieve the desired results:

  Entry:
  ------------
  
  C:/test/dummy/post/test.PDF
  

  
  
  
  
  

  
  
  
  
  
  

  It will be useful.

  Thank you
  Deepak.

• How to separate the layer in the palette layers using the color?

  How can I separate the layer in the layers palette using color to increase the visualbility like the image below?

  

  You could right click on the eye in the thumbnail of the layer

  or in the layer Panel dialog box, select layer/group properties.

  

  

  

  MTSTUNER

• How to separate the tag html to a string?

  Hai,

  I need to separate the HTML string. My channel have some XXXXXtags I need to change these tags(prividing some styles) everyone knows to separate html string tags please help

  Thank you

  Dembélé

  I found the solution

• How to separate the images from the rest the scroll boxes?

  Greetings! I need to separate the boes of scrolling images in the left side and right side. I thought I had the right code here but images that say 'Hiring' and 'domain sales"still being contained in the boes of scrolling when I want them to be outside and above them. I also want to be aligned with the image that says "best Marketing names. Can anyone help?

  Here is a link... www.bestmarketingnames.com/banneredit.php

  CSS:

  aside. Left, {aside.right}

  Background: #FFF;

  height: 290px; / * adjust the height and the width as Req'd * /.

  Width: 220px;

  overflow: scroll;

  }

  . Scroll {}

  height: 290px; / * adjust the height and the width as Req'd * /.

  overflow: scroll;

  }

  Nancy O.

• How to separate the application server and web server on the level of physical servers?

  I want to separate the application server and web server: locate on different hosts. Generally, we use Weblogic ACE. In the future maybe use Apache Tomcat as web server.
  Example,
  192.168.1.10 - as - Weblogic application server / module EJB
  192.168.1.11 - as a Web server - Weblogic / WEB module (can be - Apache Tomcat)
  
  Impossible to find examples and resources about it on google.
  Thank you.

  So, if we're looking for a subject such as:

  try {
      someEJB = context.lookup("ejb/Videotheek#model.logic.Videotheek");
  } catch (NamingException e) {
      e.printStackTrace();
  }
  

  If the EJB application is clustered in an object of type ' ClusterableRemoteRef (-4005477377232786958S: 172.31.0.107: [7003,7003,-1,-1,-1,-1,-1]: [8351443287261246917S:172.31.0.107:[7002,7002,-1,-1,-1,-1,-1]:ScriptDomain:VideotheekServer1/292])/289 172.31.0.107:ScriptDomain:VideotheekServer2 - 4005477377232786958S:172.31.0.107:[7003,7003,-1,-1,-1,-1,-1]:172.31.0.107:ScriptDomain:VideotheekServer2/289,-' is returned, which is part of the wlfullclient.jar.)

  You can try using the EJB or the annotation of the resource (do not know with certainty if Tomcat is favorable). For annotations work, you must use version servlet 2.5 or later. JNDI research work in a general such as for example Tomcat servlet container.

• How to separate the different elements of a composite image in separate layers?

  Hi guys,.

  I hit a road block, and I was wondering if someone could help me go beyond this.

  Basically, I have this image:

  [IMG] http://i50.Tinypic.com/13z06jn.jpg [line]

  and in the upper part of it going to the text (the title of the article).

  However, I would like for the text to go behind the head of John Marston (the man in the image), but obviously not behind the background.

  The problem I'm having is, it is a single image. I was wondering, is it possible to separate the image of the man in the background so that I can raise above the text, or a way to move the text behind him, but not behind the background?

  Or a completely different solution that I have completely forgotten? Apologies if it's very simple and it looks like I'm wasting your time. I don't claim to be an expert with Fireworks!

  Thank you in advance to anyone who is able to help me with this problem.

  Sincerely,

  Jack606.

  Use the polygon tool to draw around the figure. Once tracing has been finished, and you see what looks like the mobile dotted line that surrounds it, choose the Edition command > copy, then select > deselect and then click on the regular pointer tool, choose the command Edition > paste. That will stick in a copy of the figure you traced, which allows you to add text behind it. I made a copy for you that you will be able to edit in Fireworks.

• How to detect the number of channels on an oscilloscope?

  I have various models sitting around the laboratory, some two-channel, a few four-channel oscilloscope.  I would like for my program to be able to detect the number of channels is available.

  I can just tell my program how much string is available based on the model number, but is there a VISA command to request scope directly what channels he has?  I would also be able to ask what, if any, ability to function math there.

  "all drivers of the oscilloscope must return the instrumentID after initialization, and that should be enough to know the number of channels.

  What Albert was referring to is that all compatible drivers IVI in their base class interface have an attribute/property that indicates how many channels has the scope.

  If you don't want to use the driver of the IVI for the scope then maybe download some of the drivers and check the source code to see how they calculate this dynamic repeated capablity.

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to convert the B/R channel on near infrared videos?

  Hello

  Context:

  Using a defiltered DSLR equipped with near infrared infrared filter (590 or 665 nm) for example, we can take pictures of the IR. Then by a simple postprocesseing using an image editor, we can swap the red and blue channels to restore the blue color to the sky in the preservation of the color of the ntaure (tree, grass, etc.).

  I know that using AE, we can enhance the colors of the individual frames of a movie.

  Now, I want to move forward a step: convert R/B channels

  Question:

  Can we use After Effects to convert the blue and red of this video channels (B becomes R and R become B) to restore the blue color of the sky?

  If we can, could list you the menu options AE access to do this?

  Thanks in advance

  Thierry

  I did it. If you use curves to reverse the red and blue in Photoshop using curves in AE. If you want to swap the channels use a set of channels.

  AE's Photoshop on steroids. He will do everything and more that you can do in Photoshop and most of the controls in the color is the same.

  If you do not know how something use the help search field in the upper right corner of the app, and learn about the resources of the community.

• LR4.1 - tone curve - how to set the individual RGB channels?

  Hello

  I can't find out how to set the curve of different RGB channels.  I guess the LR4 tone curve works as the dialog box curves PS with the channel drop-down list.

  LR4.1 help says:

  To make adjustments at different points on the tone curve, choose an option in the menu of the curve of points, click the button change the curve of points , and then do one of the following:

  • Choose an option from the popup menu of the channel. You can change the three channels at once, or choose to change the red, green, or blue channel individually.

  When I click on the small icon in the lower right corner of the Panel curve tones, the Panel shrinks while I do not see the sliders of regions.  If I click again, they are visible again.  I can't find where to select one of the three channels indvidual.

  Aid refers to the "Point curve menu."  Where is the menu Point curve?  The curve of points is different from the tone curve?

  If I right-click (Windows) in the curve dialog box, the shortcut menu has an option show information.  I click on it power and don't see any change or any info.  Where should I look for info?
  

  Thanks for any help here.

  John

  
  

  Hi John,.

  The curve of points is without cursors. The settings for the individual channels are only available with

  PV2012. You must be editing a file with PV2010 or 2003. When to PV2012, you will see "channels: RGB" under the window of the curve. Click on the triangles of doule following RGB

  for each channel.

  HTH

  Rich

• How to separate the numbers in a string?

  I had a string that contains a lot of numbers, how can I separate them?

  I tried to use unbundle, but it does not work

  

  Whatever your question has to do with the acquisition of data?

  You don't have a channel there at all. It looks like an array of clusters. Before the unbundle, did you use the Index Array?

  Not to recognize the types of data indicates that you are at the beginning of LabVIEW. At least, you should take one of the free tutorials on the l line.

• Two users and wanting to know how to separate the access to documents and records.

  I don't understand. IM only just beginning now to "Watch" certain things on this thing. I just want our documents, photos, Wallpapers etc. only accessible for our eyes. and ears.

  Windows XP handles the issue you describe using separate 'user profiles' for each user of the computer.  The user profiles, which are defined as "limited user" (rather than a "computer administrator) cannot see other users ' documents.

  See How to create and configure the user accounts in Windows XP

  If you both already use one user profile, you need to move some documents.  This must be done by connecting to a user profile with computer administrator privileges (in order to access the files in the two accounts).

  You must also define an account with computer administrator privileges (save the built-in account named 'Administrator' only for emergency purposes).  Who has access to the computer administrator account will have access to all files on the computer.