How to set a synth MIDI of third-party software downloaded as the default synthesizer on Windows 7 (64 bit)?

I downloaded CoolSoft VirtualMIDISynth more Web Soundfont v1.0.  I'm unable to set up virtual machines to recognize the virtual computers.  Only GS Wavetable, as I understand it is not in the operating system.
This is a 1 years computer with card mother i5, available on the 200 GB drive and 16 G memory.

I am the author of Web SoundFont and I'll be happy to help you if you are having problems with my Bank and CoolSoft VirtualMIDISynth.

I second the comment of S.V. Sissi, even if your problem is mainly with newer versions of Windows, which simply do not have the control panel you are looking for choose the default of MIDI output device to be used in all Windows applications.
This setting was not available up to Windows XP, but with newer versions, you will need to use third party software to configure it in a friendly way. On Vista/7, you can use the combobox control, you will find under the tab "MIDI Mapper" CoolSoft VirtualMIDISynth settings window.
On Windows 8, there is an alternative workaround available, although more difficult to apply than MS simply locked access to the MIDI Mapper to force using internal MS/Roland GS software Synth. Quite a bad decision for all lovers of noon with good hardware or software synths on their computer...
You will find all the information you need on the site of VirtualMIDISynth (http://coolsoft.altervista.org/virtualmidisynth and http://coolsoft.altervista.org/en/blog/2013/03/what-happened-midi-mapper-windows-8).

Tags: Windows

Similar Questions

  • Rearranging Drive C - can recommend Vista management computer or maybe third-party software such as the Partition Wizard.

    original title: reorganize the C drive

    I am very short of space on drive C (system disk).   I've been advised to rearrange the drive C partition, as I have a lot of space on the D drive.   What is the best way to do this without losing any data on C or by altering the system?   Can anyone recommend Vista management computer or maybe third-party software such as the Partition Wizard.

    Hello

    read this topic to regain free space on C:

    see if this program helps you to determine what is take up space

    http://www.Jam-software.com/treesize_personal/

    by default system restore will have up to 15% of the capacity of the hard disk

    you would like to reduce this amount

    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

    http://www.vista4beginners.com/system-restore-space-used

    also use disk cleanup

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    also scan for malware

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    and read these information from microsoft on windows optimization

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    and using vista disk management you need to delete D: and extend C: into the unallocated space where D: is

    You can't fire a piece of D: on C: using vista DM

    Save all data, because it will be lost on D: and make sure that D: is not your recovery partition

    http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  • How to restore all the default permissions in windows 7 (64-bit)

    Hello

    Think I have corrupted some of my programs and rights of security/authorization file eg windows start menu, shortcuts, program (x 86) etc.

    Another example, I continue to set the permissions of windows install to allow the administrator and they often get removed after a reboot...

    Is there a way to reset all the settings of player, program and the application to their default values and keep it like that?

    Or is it I click with the right button on the C drive and select security, change permissions and check all the boxes?

    Any help is appreciated?

    See you soon

    Ben

    Think I have corrupted some of my programs and rights of security/authorization file eg windows start menu, shortcuts, program (x 86) etc.

    Another example, I continue to set the permissions of windows install to allow the administrator and they often get removed after a reboot...

    Is there a way to reset all the settings of player, program and the application to their default values and keep it like that?

    Or is it I click with the right button on the C drive and select security, change permissions and check all the boxes?

    Any help is appreciated?

    You realize even * as * an admininstrator - in Windows 7, you're not REALLY complete administrator without disabling UAC (which is not my market to follow recommended action for most people.)

    You say, 'another example' - but I'm not sure that you have provided one. Heh

    What exactly you see makes you think you screwed up permissions?  What do you have to file/folder permissions and why did you start to do?

  • How to reset the color scheme to the default level in Windows 7?

    I changed the default color of Windows 7 (32-bit version x) system palette, using the personalize > Windows color > link appearance and the dialog that results.   But she did background colors of controls like buttons, drop-down lists etc. in the dialogs implemented by applications, being identical to the forefront of the font of text on them.  This makes the information unreadable text.   I want to restore the default color palette, so that this information can be read.   I want to know how to reset the color scheme, since other changes in results window customization in unpredictable and unreadable color on other components of the application windows.
    As this resulted in almost total ease of use of my computer, I would be very grateful to anyone who can guide me to reset the color scheme for my computer to its normal state by default as soon as possible.   Thanks in advance.
    -arasan77

    Defects of appearance and personalization,

    http://www.SevenForums.com/tutorials/282-window-color-appearance-change.html

  • How to monitor the activities of internet users without using third-party software. We have some 60 windows domain user

    Hi all

    We have 60 knots which is connected with the windows domain. How to monitor the activities of internet users via the windows server

    without third-party software.

    Thanks in advance

    Alam

    Hello

    The business support, you can find forums on TechNet, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • How to set or keep a background image in my application at the beginning of the application that is, after clicking on the application icon.

    How to set or keep a background image in my application at the beginning of the application that is, after clicking on the application icon.

    I have developed a BB 7.0 BONE HTML5 / web app in which I want to include background image.

    Please guide me.

    Take a loot of rim: loadingScreen on config.xml http://developer.blackberry.com/html5/documentation/rim_loadingscreen_element_834680_11.html

  • How to set remote spaced further icon to display more text for the name below?

    Windows 7 desktop has many icons with similar names. I want that name under the icon. How to set remote spaced further icon to display more text for the name below?

    Right-click on the desktop and select Personalize.

    Select the color of the window

    Select the appearance settings advanced.

    Select the drop down next to the element

    Go down and select icon spacing (Vertical)

    change spacing next to size according to the needs.

  • I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

    I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

    Hey bellmarg,

    Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.

    Let me know how it goes.

    Kind regards

    Nicos

  • How can I change the locations of Windows Update to the default settings of Windows?

    Windows backup does not complete successfully, and I get the message "the system cannot find the specified file (0 x 80070002). Windows error procedures have not found the answer.  Solving the problems of files MS Fixit found that where Windows Update stores data has changed and that it should be repaired by changing places of WU to the default settings of Windows.  Please can someone explain how to do this?

    Hi Derek,.

    Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

    You cannot perform backup and get error the system cannot find the specified file (0 x 80070002).

    The problem may occur if there is some disk errors hard or due to the interruption by third-party programs.

    What fixit have you tried?

    To check if the problem is due to hard drive errors or due to the interruption by third-party programs, I suggest you follow the steps:

    After each step, if the problem persists, go to the other.

    Method 1: Check the hard disk for errors

     

    See the site:

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-in/Windows-Vista/check-your-hard-disk-for-errors

     

    Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

     

    Method 2: Clean boot

     

    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

    See the mentioned site:

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

    Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

     

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

     

     

  • Uninstall third-party software

    Hello. When I install software that requires simply by dragging the applications icon in the 'Applications' folder, I feel comfortable just by dragging it to the trash if I don't want. But when an application uses a Setup program I did not. The application that worries me particularly (but also other applications installed) is "Tune Up My Mac". I unintentionally installed its developers because he FRAUDULENTLY"portrayed as free. Yes, it is free to download, but it costs $40 to use it. And it runs automatically whenever I start my computer and gives me a hard time when I try to stop it. I don't have $ 40 to spend on it, even if I thought it was worth. So can someone please tell me how safely and completely get rid of it? TIA

    Any software, no matter from where it comes, which aims to 'clean up' or 'speed up' a Mac automatically is a scam.

    Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

    Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

    I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

    Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

    Back up all data before making any changes.

    Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

    If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

    Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

  • What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?

    Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.

    I need a response that I'm getting a little irritated that something as simple as install a printer should take this amunt of work. Oh, BTW, running Windows XP Home Edition, 2004 computer version. I don't know if this helps or not. The only thing I'm NOT willing to do is another system of recovery. That's how I got here in the first place. So, if anyone out there has suggestions, ideas (no matter how strange), ar solves this problem, I would greatly appreciate a response.
    Thank you
    songtothesirens

    Hello

    Re-install Windows Installer and see if it helps.

    Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003

    Note: Run method 2 from the above link.

    Hope this information helps.

  • How Win764() will not work if I install programs elsewhere other than the default Program Files folders?

    The reason for this question is that I want both 1.) Learn more about Win7 64 bit works, as well as 2.) understand the scope of customization possible.

    In any case, first of all, what this scenario: what happens if I create a subfolder in each of the two Program Files folders? Say, in the (x 86) program, I create a subfolder called Programs (x 86). Or another name, whatever and say that I do the same thing for the Program Files folder. So, what happens if instead of installing all my software back into the default directory Program Files or program (x 86), what happens if I start to install in these subdirectories to the place?

    Everything works fine? I heard that these two Program Files folders have assignments to special access for security reasons. As I start working on these issues, the same security structure would be preserved, correct? Second, everything will work correctly not only wise, but in terms of features? I know that each of the Program Files folders also has its own common files folder. If I make my method, installed programs to put their files in the Common Files folder correctly, and then get back them properly when necessary?

    Finally, I would also like to know out of curiosity, what would happen if I don't use the program files directories at all and instead started to install things in a completely different directory. But that is less an issue for me at the moment. I just want to know if what I have set out above would be good or not.

    Thank you!

    Hi StormRyder

    This issue is beyond the scope of these level consumer forums.

    I would recommend that you post on the Technet ITPro Windows 7 forumsfollow-up questions. Advanced on these forums users are more familiar with these types of settings, and may explain some of the common pitfalls you may encounter, as well as how to be ready in case something goes wrong.

    I hope this helps.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • Compatible third-party software list

    Hi all!

    I'm trying to understand if some third party software are compatible with OS X 10.11, someone could suggest me a site/list or another document where I can always find updated compatibility matrix?

    Thank you

    Good bye

    Request to check the compatibility of applications

    http://roaringapps.com/apps

    If the app does ' t start automatically, you must click on the button "go to the compatibility table.

  • Try to stream video to the Wii by using third-party software.

    original title: try to stream videos through thrid party

    XP pro SP3 with avg free and windows firewall and netgear router running.  PC is connected to the router; Wii's wireless

    I'm looking to stream video to my wii with the help of a third-party application that uses the pc as a server.  The application cannot access the pc and I spent the last two days to work with their support, trying to nail down the reason.  None of the newspapers I can access the port list or program in question being blocked and when I use the pc browser to go to the same place that the wii is trying to reach its done appear the application correctly.

    You try to use PlayOn.TV?  Have you checked their FAQ?  http://www.Playon.TV/FAQ#security

    If you can't make it work, people better ask are people in the PlayOn forum: http://www.playon.tv/forum

  • How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

    How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

    Hello

    Based on this and that is not a printer ready network. Has a network card?
    Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.

    Good luck.

Maybe you are looking for