How to set default COPY for HP Officejet 6500 has more quality DRAFT?

Similar Questions

• How do to transfer article Microsoft Word for HP Officejet 6500 has more to print

  Could not find a way to print an article in Microsoft Word using my HPOfficejet 6500 has more. How can I transfer the article to print it directly from Word Microspft?

  What operating system? What version of Word?

  Generally, you need to select file, print, and then make sure the Officejet 6500 a is selected (not the fax device), select the appropriate properties and then select print.

• Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

  Hello

  So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

  I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

  It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

  Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

  Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

  Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

  Hope it is something simple and anyone can help you.

  Thank you

  Steve

  Following this request and reading the many more similar questions, I think I may have solved this.

  I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

  I tried the following in the past two days...

  (1) completely don't reset my router (wiped all settings and started)-no luck!

  (2) I tried changing to WPA2 to just WPA security - no luck!

  (3) tried to convey the Hello to the printer ports - no luck!

  (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

  Finally, what seems to have made (at least for now) has been...

  (1) disconnected the Officejet ethernet and set up as wireless.

  (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

  (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

  By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

  Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

• Analysis application does not work for HP Officejet 6500 has more.

  My OS is Windows Vista 64-bit. Image of Windows service is not running. I followed the steps to start the dependency services. Still will not start. Error message 1068.     Any suggestions?

  Hello FixN

  Try the following steps to ensure that all services are running. RPC end point mapper may not show it seems have found under Windows 7 but not Vista. You are using Vista as the original poster?

  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
   
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake.
   
  Check the dependencies or sous-dependances:
   
  Right-click WIA (Windows Image Acquisition) by selecting the first properties, and then click the Dependencies tab. It should list: remote procedure call and detection of Harward Shell
   
  Under the CPP he then list Launcher process for the Service DCOM and RPC Endpoint Mapper to go back to the main list services.msc and then right click, will launch all the items listed as dependencies or void dependencies under WIA

• I have problems to install the software for my Officejet 6500 has more on my Win XP machine.

  
  
  Follow instructions for 'clear' all the stuff of temp and started around. Much to my surprise I had the same problems all over again. I can't understand this update of the player from Nvidia. But your suggestions led to a workaround. Once I was allowed to leave the area temporary and tried to re install I went back after my problem continued to search for anything I might have missed. I was able to locate the new Temp directory that had just been created via the HP software. I have this opening was able to directly run the installation from this directory and he did not get given wrong directions to the Nvidia. Installation was successful

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• OfficeJet 6500 has more - copy

  How can I copy from an original two-sided and a double-sided copy?

  Hello

  The Officejet 6500 has more provide the duplexing only.

  The duplexer to this model provides no ADF Suplexing options.

  You can find the specifications below:

  http://www.shopping.HP.com/webapp/shopping/store_access.do?template_type=product_detail&product_code=CN557A%23B1H&JumpID=oc_r1002_usenc-001&lang=en&cc=us

  SS, maybe you'll see, impressions recto only are provided.

  Kind regards.

  Shlomi

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

• OfficeJet 6500 has more fax keyboard disabled

  Hello experts,

  I have a printer officejet 6500 has more, and I have questions sometimes when you send a fax.

  In some cases, after dialing the phone number of receiver, automatic voice ask redirect the fax to a number given (eg. "dial 26 Fax").

  Anyway, the keypad of the printer is disabled after dialing the phone number and I can not send the fax. How can I activate the keyboard when calling the digit numbers requested by automatic voice?

  Hi there ofblack, welcome to the forums

  I saw your post on the fax concern you have. First of all, I suggest you to check on the Page. 48 of the User Guide , which is to monitor dial to see if this information will help you. As long as you enter the numbers fast enough, the fax needs to work with the numbering screen, otherwise, you will need to use the phone to enter all the guests under send a fax manually from a phone.

  This guide is the standard troubleshooting for fax so that might help: I can't send or receive faxes

  Have a great Thursday

• OfficeJet 6500 has more on windows home premium 7 ad-hoc connection loss

  OS: windows edition Home premium 7

  product: officejet 6500 has more

  We organize a festival and everyone has a mobile phone that needs to print to the printer...

  We don't have a network or a router and try to connect 6 ad-hoc laptop computers to the printer...

  I managed to install the software on three laptop computers and a print ad-hoc wireless, but now he says that he does not find the printer over, even though the wireless network connections that the pc is connected to the network HPE710n.E5E3C5...

  I can't connect to the http://169.254.227.197/ (printer server) of this laptop...

  so he went completely downhill...

  on this laptop, I was able to print a page...

  on three laptop I was also able to print a page...

  but now he also says he «cannot communicate with the printer...» »

  is ad-hoc only for a laptop at the same time?

  What solution do you propose?

  can we do a completely wireless network with utp cable wireless router? and do a homegroup? and connect the printer with utp?

  is the special designed to accept prints six different cell phones at the same time?

  Thanks for any solution! We need it's really bad!

  With ad-hoc connections, it is really intended more for printing in a pinch without going through the hassle of setting it up on a network.  Or, you have two computers and you have connected it via USB to an and a laptop which is wireless, you can print via ad-hoc of the laptop.

  Honestly, I recommend picking up an affordable standalone wireless router (Netgear, Linksys, etc.) and connect the printer (wireless or Ethernet, does not matter).  From there on, connect the computers on this network and you should be able to install and print without any problems.  You can find the router could be useful beyond just this configuration or may be good to have if you plan to do events like this on a regular basis.

  The printer itself is not a router and communicting with multiple devices simultaneously may create congestion in causing connection problems similar to what you experience when you use ad - hoc for as many devices.

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• Win7 x 64 install an Officejet 6500 has MORE. Cannot print

  Win7 x 64 install an Officejet 6500 has MORE. Printer is connected to the wireless very well. Win7 x 64 computer can ping and see the printer on the network.

  Get a message error everytime I try to print saying: "it cannot connect to the printer.

  Same computer can connect to the printer and to view and modify settings wireless very well.

  I guess it's a problem with Win7 x 64. I need to fix this before to decide to take back to Costco and exchange for the Canon I almost branch instead. HP you have always had driver problems, but still? Really!

  Has taken over the crappy HP. Picked up a Canon PIXMA MX882 instead. Impeccable installation, in 10 min I'm printing, scanning, fax wireless with not a single question.

  I am VERY disappointed with HP and its incompatibility with Win7 x 64 drivers. Don't advertise your crap software is compatible, when it is not! I lost hours of my personal time, trying to get HP to work then most of time taking the piece of crap back (I really like the hardware of the printer - software "guys really?"). I will never buy another HP printer. And on the Canon Wireless Setup was easier. A button called easy set up on top of the printer and BAM done. * beep * HP, * beep * indeed.

• OfficeJet 6500 has more I printed some photos and now won't print regular documents.

  Software problem with paper size selection.

  I've used the Officejet 6500 has more several years with no problems. Recently, I have printed photos and changed the size of the paper, it printed fine. Now it will not print any document or e-mail message said selected paper size is incorrect. I looked for different paper formats and changed the letter. Same problem will not print documednts. It will correctly display the photos. I have deleated and reloaded all HP software already.

  Is it now a Windows 8 malfunction?

  Help.

  Thanks for the offer. I continued to work on the set-up and you have the printer to work.

  Thank you.