How to set the lower volume than in the few seconds of a whole piece?
!
Hello
I have video and audio track below, I want to reduce the volume of the sound cca, but only. 10 seconds from the beach. Before and after this section volume must remain at the same level.
Use the mixer, and key executives
or
Cut out the section and add it to a separate audio track.
You can use the track mixer, video mixer, or right click on any clip to audio level control
Tags: Premiere
Similar Questions
-
My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?
Hello
· You did it changes on your machine before this problem?
· You have a LCD or TFT monitor?
Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.
You can also follow these links for the resolution of the monitor & check if it helps.
Change the resolution of your monitor
To change your screen resolution
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to set the HostDiskPartitionAttributes property when creating Vmfs volume
Hi all
When creating vmfs datastore through vlume
programmatically, I need to partition the vmfs volume. here my question
is an idea how to set the HostDiskPartitionAttributes there is a
parameter to create vmfs vloume. Here I use Vdisk lun san
"that will have the size, raid, stripesize... by this I need to set this.
HostDiskPartitionAttributes ' property.could someone help me please. "
Note: it's links to the document:
http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html
is the method that you need to find CreateVmfsDatastore.
Thank you
As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.
-
How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.
Thank you very much for your help, if necessary.
Quite a few questions, send, but I will do what I can to answer them.
I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.
In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.
Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.
You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.
I hope this information is useful!
-
How to set the path of the report in a plugin for model
I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.
Thank you.
If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.
If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).
-
How to set the timeout of read when using channelReader.ReadWaveform?
I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.
When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired. To wait for the samples become available use longer read timeout... »
No problem, I thought, I'll just put a longer period. I searched through the documentation, and the timeout only I found was the watchdog timeout. When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.
I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.
How to set the timeout so that ReadWaveform() is not the time?
Here is the code:
privateAnalogMultiChannelReaderchannelReader;
privateAnalogWaveform
awf; publicList
GetWaveForm() {
Try
{
Task getWaveform = newTask();
getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,
RangeMaximum, AIVoltageUnits.Volts);
getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)
SampleQuantityMode.FiniteSamples, NumSamples);
getWaveform.Control (TaskAction.Verify);
channelReader = new AnalogMultiChannelReader (getWaveform.Stream);
AnalogWaveform
data = channelReader.ReadWaveform (NumSamples); AWF = data [0];
samples As new List
(); for (inti = 0; i)
returnsamples;
}
catch (DaqExceptionexception)
{
MessageBox.Show (exception. (Message);
}
List of
l = newList (); return l;
}
Thank you
Curt
Hi Curt,.
Here is a Knowledge Base that can help you to set the timeout setting in your code:
-
How to set the storage space allocated to the restoration of the system to 200 MB?
Could you tell me how to set the maximum storage limit to 200 MB?
Whenever I have delete system restore points, my hard disk free space increases about 10%. About a week or so later, it's back to where it was before I deleted the restore points.
It is very important for me because I am sure that storage space is set too high.
Hello
See the "BOLD" marked links with more information to help.
Phantom memory also holds your restore VSSadmin points it defines parameters.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to turn System Restore on or off in Vista
http://www.Vistax64.com/tutorials/66971-system-restore.htmlAdjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to set the time stamp for incoming mail?
How to set the time stamp for incoming mail? I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.
Thank you
Laura
2.13.2012If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.
If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
https://account.live.com/EditProf.aspx
and change the time zones for the good...Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.
Noel
-
try to set the color of amd's message color depth less than 24. How to set the highest color depth?
If your computer allows you to change this setting, it will be located in the "Control Panel > display > resolution > Advanced Settings > Monitor tab > screen colors.
-
How to set the timing correctly?
Based on the following batch file, I would like to raise the window at 11:05 and 11:07.
Because he wanted to wait 1 minute before you restart, if the batch file is executed at 11:05, which wait a minute before you restart the window at 11:06.
If the window does not always complete restart until the 11:07:36 or after 11:08, I would like to know about the question of whether or not the second restart at 11:07 process would be treated. On other words, if the window si la fenetre termine end relaunch 11:07:36, because the schedule at 11:07 is over, window would still go this annex missed 11:07?
Does anyone have any suggestions?
Thanks in advance for your suggestionsBatch file: restart.bat
%windir%\System32\shutdown.exe - r t 60 f
How to set the timing correctly?
Hello
Sorry for the delay in responding.
You run a batch file, your Windows question is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.
Please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Thank you.
-
How to set the width of layout desktop screen in fluidlayout?
For the flow layout of RWD, Web site design page I have is 960px wide. While working on DW CC, the width of sizes of support are:
Mobile: width: 86,45%;
Shelf width: 90.675%;
Desktop width: 960px;
When I set a percentage for desktop (for 960px), 68.6% (which is less mobile and the width of the Tablet), the browser displays more width 960px. Use a screen resolution of 1680X1050px.
Now how to set the size of layout as 960px for desktop, in percentage?
Or should I keep it as 960px for office and percentage for mobile and Tablet?
68.6% of 1680px equals 1152px, then Yes, he is bigger than 960px
If you want to stop at the 960px available, then set max-width: 960px to the container as well as width: 68.6%.
-
LR4.1 - tone curve - how to set the individual RGB channels?
Hello
I can't find out how to set the curve of different RGB channels. I guess the LR4 tone curve works as the dialog box curves PS with the channel drop-down list.
LR4.1 help says:
To make adjustments at different points on the tone curve, choose an option in the menu of the curve of points, click the button change the curve of points , and then do one of the following:
- Choose an option from the popup menu of the channel. You can change the three channels at once, or choose to change the red, green, or blue channel individually.
When I click on the small icon in the lower right corner of the Panel curve tones, the Panel shrinks while I do not see the sliders of regions. If I click again, they are visible again. I can't find where to select one of the three channels indvidual.
Aid refers to the "Point curve menu." Where is the menu Point curve? The curve of points is different from the tone curve?
If I right-click (Windows) in the curve dialog box, the shortcut menu has an option show information. I click on it power and don't see any change or any info. Where should I look for info?
Thanks for any help here.
John
Hi John,.
The curve of points is without cursors. The settings for the individual channels are only available with
PV2012. You must be editing a file with PV2010 or 2003. When to PV2012, you will see "channels: RGB" under the window of the curve. Click on the triangles of doule following RGB
for each channel.
HTH
Rich
-
First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better
visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have
greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines
pixels, which appear on the 'place '. I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)
and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged). So going
back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"
I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the
same color II had chosen. Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go
on the 'design' say after a break for tea, etc. ????? ( :
I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about. I save pdf (1) and a jpeg. Hope that this sounds
like what we "do"... When we know much more than me.
And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs. Are there
another of Adobe products, I would have to do this. Free hand has not worked so well, so far.
I'm in advance, so grateful to you - anyone you may, for your help. I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71
and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW
Please post in the Photoshop forum.
http://forums.Adobe.com/community/Photoshop
Bob
-
How to set the label of 'other '?
I should have known that at some point (or set it by accident), but I can't figure out how to set the other label (white) now...
THX,
R
areohbee wrote:
Yes, I used 5 labels I can put (red, yellow, green, blue, violet - the name of which depends on all of the selected label), and another called 'other' (white) that has been applied to some pictures. I do not see how it has implemented and although its pretty easy to remove or change, I don't see how it submit a new application, or apply it to a different photo... She is available for filtering, but I do not see how to configure.
Right... it is impossible to define with a button. You must change the field to label something * other * than any of the five current labels. So, you can do it manually or you can change the games, set it and change back. Try to go the label field in the metadata Panel, and typing in 'other' or anything other that the five current names in all of the label you have active.
-
How to set the number of e-mail messages that are stored on my iPhone
How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.
This is series is not defined in the world
You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area
Maybe you are looking for
-
Is there a FF 9.0.1 compatible Norton toolbar?
My add on for Norton Tool Bar Version 2011.7.8 has been disabled because it is not compatible with FF 9.0.1. Is there a version update available?
-
How can I PREVENT Time Machine back on the wake from sleep?
I leave my machine on the work week and when I finished the night, I SLEEP there. In the morning, he has no need to backup first thing. But Time Machine insists on execution from the moment I have a mouse and he wakes up from his sleep. It was fine w
-
TouchPad not load applications or disable
My son used my new TouchPad for the reading of ebooks, but this afternoon he brought to me because it was "broken". A little investigation has revealed that it does not load any application (and not only its ebook reader app), and it will turn off n
-
I'm trying to access games on yahoo and landmarks and go as far as the site, but no games come when you are prompted.
-
the screen of my laptop turns suddenly vacuum... !!!
Hallo... I just installed windows7 ultimate in my acer aspire4551... My problem is, all of a sudden, the screen goes white, but all lighting works normally... Why? I checked if any problem concerning the system... but it's just also runs normally. fo